Hello! I'm engineer from Poland, and I'm representing a group of 3D printing community. Our last goal is to make SLS printing machine for our work shop. We manage all issues with feeding pistons and printing bed. But we've stuck on laser beam. There is very few information how to control the laser beam, also what kind of laser is best for SLS printing - in this case for plastics. My question is that anybody can share some knowledge on this topic? Of course we have read all information and we are familiar with opinions that home-made sls is impossible to make... But however we decided to give us a chance on this project. If You want to share some knowledge or You have similar issues please contact me on formowniki (at) gmail.com ! https://reprap.org/forum/read.php?153,373559,373559#msg-373559 Fri, 07 Aug 2026 07:16:48 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?153,373559,383656#msg-383656 https://reprap.org/forum/read.php?153,373559,383656#msg-383656 www.ebay.com]

What do You think? Is that sufficient for lets say 210x210x210 building volume? On the pro sls printers there is only compressed air consumption and that is for N2 generator.]]> PolishSLS Powder Printing and Selective Laser Sintering Wed, 16 Jul 2014 04:11:44 -0400 https://reprap.org/forum/read.php?153,373559,382904#msg-382904 https://reprap.org/forum/read.php?153,373559,382904#msg-382904
I think, you can use most RepRap slicers with adjusting the line width (and/or scaling factors) for creating the slice images ...]]> VDX Powder Printing and Selective Laser Sintering Mon, 14 Jul 2014 15:06:27 -0400 https://reprap.org/forum/read.php?153,373559,382892#msg-382892 https://reprap.org/forum/read.php?153,373559,382892#msg-382892
thanks for rep.

First what is "radial wiper"? I'm not familiar with this.

About galvo scanner and software. Do You know some solution how to translate 3D CAD model to galvo scanner? Is such thing on market or I have to wrote my own software? The thing is to send instruction to printer: everything is OK, inert gas pressure is in, doors ale locked, temperature is OK so You can put 1st layer, scan, next layer, scan, next layer etc. I think it will be necessary to write own BIOS for machine which will manage the temperature and doors and inert gas. But the thing is how to translate specific slice to galvo. I don't think that there is something like Cura or Kslicer for SLS machines...]]> PolishSLS Powder Printing and Selective Laser Sintering Mon, 14 Jul 2014 14:53:27 -0400 https://reprap.org/forum/read.php?153,373559,382513#msg-382513 https://reprap.org/forum/read.php?153,373559,382513#msg-382513
For a galvo-scanner system a radial wiper would be easier to build and easier to enclose/shield with inert gas too.

If you have a galvo-driver already included with BeamConstruct, this would be fine ... otherwise you'll need a programming license what's 500€ per year.

Argon would be the better gas for shielding -- N2 is cheaper, but can be problematic when sintering metal alloys and ceramic-polymer compounds ...]]> VDX Powder Printing and Selective Laser Sintering Sun, 13 Jul 2014 18:13:06 -0400 https://reprap.org/forum/read.php?153,373559,382355#msg-382355 https://reprap.org/forum/read.php?153,373559,382355#msg-382355
1) [pwdr.github.io] - for powder distribution. Of course we need close chamber so it need to be changed. But for base I think is OK.

2) [www.sintecoptronics.com] laser marking system based on model: M-UL-50OEM

3) [www.lasermarkingsoftware.com] software with Z-ax control. I have no clue how it that compatible with M-UL-50OEM

4) [www.onsitegas.com] while we are gonna sinter powder, it the chamber has to be continuously supply with neutral gas. So whatever we buy it will be OK. Of course withe proper parameters.

So what do You guys think?]]> PolishSLS Powder Printing and Selective Laser Sintering Sun, 13 Jul 2014 10:45:50 -0400 https://reprap.org/forum/read.php?153,373559,378257#msg-378257 https://reprap.org/forum/read.php?153,373559,378257#msg-378257 MrBaz Powder Printing and Selective Laser Sintering Fri, 04 Jul 2014 20:08:30 -0400 https://reprap.org/forum/read.php?153,373559,373648#msg-373648 https://reprap.org/forum/read.php?153,373559,373648#msg-373648
So try to get some IR-diodelasers with 808nm or 975nm and >5Watts of output power (and protective goggles for this wavelengths too!) and use dark plastic powder or mix bright powder with some carbon black ...]]> VDX Powder Printing and Selective Laser Sintering Mon, 23 Jun 2014 15:00:58 -0400 https://reprap.org/forum/read.php?153,373559,373559#msg-373559 https://reprap.org/forum/read.php?153,373559,373559#msg-373559
I'm engineer from Poland, and I'm representing a group of 3D printing community. Our last goal is to make SLS printing machine for our work shop. We manage all issues with feeding pistons and printing bed. But we've stuck on laser beam. There is very few information how to control the laser beam, also what kind of laser is best for SLS printing - in this case for plastics. My question is that anybody can share some knowledge on this topic?

Of course we have read all information and we are familiar with opinions that home-made sls is impossible to make... But however we decided to give us a chance on this project.

If You want to share some knowledge or You have similar issues please contact me on formowniki (at) gmail.com !]]> PolishSLS Powder Printing and Selective Laser Sintering Mon, 23 Jun 2014 11:28:53 -0400