Guys Something I just noticed. Skeinforge 50 is not putting gcode instructions into the gcode file to set the extruder temperature. It used to do this OK a while ago but now there is none. I am guessing this was intentional. How do we make Skeinforge50 do like it used to and put them in the gcode ?? Cheers aka47 https://reprap.org/forum/read.php?154,164658,164658#msg-164658 Mon, 20 Apr 2026 05:50:25 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?154,164658,165178#msg-165178 https://reprap.org/forum/read.php?154,164658,165178#msg-165178 The one from October is the development version and might contain bugs..

[github.com]]]> ahmetcemturan Skeinforge Fri, 09 Nov 2012 09:17:17 -0500 https://reprap.org/forum/read.php?154,164658,165177#msg-165177 https://reprap.org/forum/read.php?154,164658,165177#msg-165177
[fabmetheus.crsndoo.com]

I guess this is one of the benefits of git or perhaps nay version control system.

It is always clear which bit is older/newer.

Should I perhaps be using a differents source ?? This is the one thrown up top of the list in Google.]]> aka47 Skeinforge Fri, 09 Nov 2012 08:45:54 -0500 https://reprap.org/forum/read.php?154,164658,165163#msg-165163 https://reprap.org/forum/read.php?154,164658,165163#msg-165163
This is for cleaning up the workflow in SF, it is not tested yet...]]> ahmetcemturan Skeinforge Fri, 09 Nov 2012 07:24:20 -0500 https://reprap.org/forum/read.php?154,164658,165153#msg-165153 https://reprap.org/forum/read.php?154,164658,165153#msg-165153 -------------------------------------------------------

> As a side note, the date I see in version.txt is
> 31/10/2012.

yes, not yesterday's date!…]]> François Delègue Skeinforge Fri, 09 Nov 2012 06:20:47 -0500 https://reprap.org/forum/read.php?154,164658,165147#msg-165147 https://reprap.org/forum/read.php?154,164658,165147#msg-165147

So you're right François, didn't check that latest version, this might be a good idea to still submit patches to enrique then.

As a side note, the date I see in version.txt is 31/10/2012.]]> DeuxVis Skeinforge Fri, 09 Nov 2012 05:58:57 -0500 https://reprap.org/forum/read.php?154,164658,165110#msg-165110 https://reprap.org/forum/read.php?154,164658,165110#msg-165110
You can find it on Github..
Just follow the Sfact link...]]> ahmetcemturan Skeinforge Fri, 09 Nov 2012 02:26:21 -0500 https://reprap.org/forum/read.php?154,164658,165022#msg-165022 https://reprap.org/forum/read.php?154,164658,165022#msg-165022
Yes I had done a from scratch setup before I posted here.

The only thing I can think is that there is some python or library issue that skeinforge is bumping into and producing the odd results.

To sort out the machine that I was working on for one of the RUG, I hacked out some start and end gcode scripts for now that should see him straight for a while.

Is there a git repo or some such for skeinforge. Everythign else seems to have gone this way but not skeinforge.

I tend to mirror such things and my update scripts keep them up to date. The 50 version must be getting a little old now.

For working copies I copy the current state of play to my applications area.

Other than that it looks like waiting for the next release to see if it makes any difference.

Wget'ing the file and then uncompressing etc only realy works easily if the file name stays the same. Which you would'nt want for continual updates.]]> aka47 Skeinforge Thu, 08 Nov 2012 12:27:25 -0500 https://reprap.org/forum/read.php?154,164658,165018#msg-165018 https://reprap.org/forum/read.php?154,164658,165018#msg-165018 last version the date into fabmetheus_utilities/version.txt is today's date… I am asking myself about this difference, perhaps Enrique makes "official releases"… from time to time now…?

Andy, going from scratch as DeuxVis says is the best idea from now…]]> François Delègue Skeinforge Thu, 08 Nov 2012 12:12:49 -0500 https://reprap.org/forum/read.php?154,164658,165009#msg-165009 https://reprap.org/forum/read.php?154,164658,165009#msg-165009 I remember that sometimes when upgrading skeinforge - that was when it was still regularly maintained - settings used to get corrupted, the only solution being to remove the whole .skeinforge directory - keep a backup for reference ofc - and start from scratch.]]> DeuxVis Skeinforge Thu, 08 Nov 2012 11:00:29 -0500 https://reprap.org/forum/read.php?154,164658,164981#msg-164981 https://reprap.org/forum/read.php?154,164658,164981#msg-164981 ahmetcemturan Skeinforge Thu, 08 Nov 2012 07:36:25 -0500 https://reprap.org/forum/read.php?154,164658,164970#msg-164970 https://reprap.org/forum/read.php?154,164658,164970#msg-164970
As you can see there are only start stop extruder commands (irrelevant on marlin and on a stepper driven mendel)

andy@quicksilver:~$ find ./ -name replace.csv
./.skeinforge/alterations/replace.csv
andy@quicksilver:~$ cat ./.skeinforge/alterations/replace.csv
M101
M103

My copy of skeinforge is in

andy@quicksilver:~$ find ./ -name skeinforge.py
./applications/skeinforge50/skeinforge_application/skeinforge.py

So falls within the search path.]]> aka47 Skeinforge Thu, 08 Nov 2012 05:52:50 -0500 https://reprap.org/forum/read.php?154,164658,164965#msg-164965 https://reprap.org/forum/read.php?154,164658,164965#msg-164965
The penultimate file has temp settings in and the final gcode one doesnt.

Rather strange.]]> aka47 Skeinforge Thu, 08 Nov 2012 05:42:21 -0500 https://reprap.org/forum/read.php?154,164658,164957#msg-164957 https://reprap.org/forum/read.php?154,164658,164957#msg-164957
Ignore the start.gcode as i put a set temp in here as a temporary workaround.

You can see it see the temperatures though but not set any.

Just about to try the PLA Blue profile next.]]> aka47 Skeinforge Thu, 08 Nov 2012 04:49:31 -0500 https://reprap.org/forum/read.php?154,164658,164800#msg-164800 https://reprap.org/forum/read.php?154,164658,164800#msg-164800 No problems...
G90
G21
M103
M105
M106
M140 S60.0
M141 S30.0
M142 S0.0
M113 S1.0
M108 S210.0
M104 S200.0
my first lines..
can you please enable the penultimate gcode option in export and then copy paste the top part of the gcode or upload the gcode file. (the penultimate one...)]]> ahmetcemturan Skeinforge Wed, 07 Nov 2012 07:34:07 -0500 https://reprap.org/forum/read.php?154,164658,164797#msg-164797 https://reprap.org/forum/read.php?154,164658,164797#msg-164797
I downloaded :-

2012-03-15 20:07:28 CET (Click to Download)

from :-

[fabmetheus.crsndoo.com]

On Monday 5 /11/2012

It is currently being used on my laptop in place of the 45 version I was using (Same build of laptop etc)

andy@quicksilver:~$ uname -a
Linux quicksilver 3.2.0-33-generic #52-Ubuntu SMP Thu Oct 18 16:29:15 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

64Bit Ubuntu, think it is 12.04

I can have a look for the python vers etc if you need it.]]> aka47 Skeinforge Wed, 07 Nov 2012 07:18:14 -0500 https://reprap.org/forum/read.php?154,164658,164794#msg-164794 https://reprap.org/forum/read.php?154,164658,164794#msg-164794 ahmetcemturan Skeinforge Wed, 07 Nov 2012 07:11:41 -0500 https://reprap.org/forum/read.php?154,164658,164792#msg-164792 https://reprap.org/forum/read.php?154,164658,164792#msg-164792
It is a bodge indeed, and misses out on the interlayer temperature changes.

If it turns out to be a bug/feature, and no one says anything though it is'nt likely to get fixed.]]> aka47 Skeinforge Wed, 07 Nov 2012 07:10:09 -0500 https://reprap.org/forum/read.php?154,164658,164784#msg-164784 https://reprap.org/forum/read.php?154,164658,164784#msg-164784
Far from perfect as it is not changing with profiles, but could help for some time until you find what happens.

Did you check your replace.csv is not misconfigured to remove those gcodes ?]]> DeuxVis Skeinforge Wed, 07 Nov 2012 06:35:09 -0500 https://reprap.org/forum/read.php?154,164658,164780#msg-164780 https://reprap.org/forum/read.php?154,164658,164780#msg-164780
I would'nt mind but the printer I am sorting for a friend doesnt have a chamber or a controlled heated bed. But thanks for the thought though.

I am slowly coming round to the idea that there might be a bug in skeinforge 50 that was'nt in the last version I was using (45).

Thanks Francois I will try that over the next couple of nights.

Funnily enough the PLA I am trying to print with is indeed blue.

What a star...

Thanks

aka47]]> aka47 Skeinforge Wed, 07 Nov 2012 05:53:31 -0500 https://reprap.org/forum/read.php?154,164658,164769#msg-164769 https://reprap.org/forum/read.php?154,164658,164769#msg-164769 François Delègue Skeinforge Wed, 07 Nov 2012 04:40:03 -0500 https://reprap.org/forum/read.php?154,164658,164765#msg-164765 https://reprap.org/forum/read.php?154,164658,164765#msg-164765 SFACT has a Temperature setting in Chamber that is put into gcode at the start, not skeinforge AFAIK..]]> ahmetcemturan Skeinforge Wed, 07 Nov 2012 04:15:38 -0500 https://reprap.org/forum/read.php?154,164658,164736#msg-164736 https://reprap.org/forum/read.php?154,164658,164736#msg-164736
Hardwarekiller]]> Hardwarekiller Skeinforge Tue, 06 Nov 2012 23:13:25 -0500 https://reprap.org/forum/read.php?154,164658,164688#msg-164688 https://reprap.org/forum/read.php?154,164658,164688#msg-164688
First thing I checked was Activate Temperature was ticked. Even unchecked the box that removes reundant mcodes just in case it was being a touch over zealous.

I only noticed the problem when I stopped preheating the extruder in pronterface.

Look mum no temperatures...... It goes straight into the G1 printing statements. It also seems to be dead keen on settings for motor extruders rather than stepper extruders as well.

G90
G21
G28
M105
M106
M113 S1.0
M108 S8.0
G1 X66.984 Y106.971 Z0.2 F600.0
G1 F798.0
G1 E2.0
G1 F600.0
M101
G1 X67.488 Y108.468 Z0.2 F480.0 E2.1891
G1 X76.752 Y124.705 Z0.2 F480.0 E4.4274
G1 X82.125 Y128.161 Z0.2 F480.0 E5.1923
G1 X101.368 Y126.475 Z0.2 F480.0 E7.5053
G1 X103.583 Y123.183 Z0.2 F480.0 E7.9805]]> aka47 Skeinforge Tue, 06 Nov 2012 16:39:04 -0500 https://reprap.org/forum/read.php?154,164658,164670#msg-164670 https://reprap.org/forum/read.php?154,164658,164670#msg-164670
(but as I don't want different temperatures according to layers during prints, I let Temperature plugin deactivated and set extruder temperature into start.gcode)]]> François Delègue Skeinforge Tue, 06 Nov 2012 15:04:51 -0500 https://reprap.org/forum/read.php?154,164658,164658#msg-164658 https://reprap.org/forum/read.php?154,164658,164658#msg-164658
Something I just noticed.

Skeinforge 50 is not putting gcode instructions into the gcode file to set the extruder temperature.

It used to do this OK a while ago but now there is none.

I am guessing this was intentional. How do we make Skeinforge50 do like it used to and put them in the gcode ??

Cheers

aka47]]> aka47 Skeinforge Tue, 06 Nov 2012 13:58:29 -0500