I attached my custom Skeinforge settings, along with the .stl file and corresponding gcode from Skeinforge. (1) Why does Z start at 0.01 instead of 0? (Line 6) (2) Why does F start at 2400 (Line 11) for what seems to be Layer 0, but be F 6000 (Line 187) elsewhere? I'd like F to be at 6000 throughout. Would appreciate any help on how to tweak these settings, thank you! https://reprap.org/forum/read.php?154,256412,256412#msg-256412 Tue, 15 Sep 2026 11:51:06 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?154,256412,260365#msg-260365 https://reprap.org/forum/read.php?154,256412,260365#msg-260365
@ahmetcemturan - Just looked up SFACT, I'm just using SF-50 from [github.com] so I don't think I'm on SFACT.

Your help has been much appreciated! Sorry for the slow responses just totally overwhelmed with work and I'm new to coding/Skeinforge. One last question:

I want to save these custom settings to the code so that someone else can pull the custom settings like they would if they selected extrusion > ABS from the dropdown. If I add a set of my profile .csv's to the code in skeinforge/skeinforge_application/profiles/extrusion will that work? Or should each new user just add those .csv files to their local ~/.skeinforge folder? Wasn't sure if the custom settings in the code would be overwritten by the local ~/.skeinforge folder. How are the initial settings saved for the extrusion > ABS profile and others? Only temperature.csv is in skeinforge/skeinforge_application/profiles/extrusion/ABS and others and I was confused by that.

P.S. @ahmetcemturan - Downloading your SFACT now to see how you modified the code.]]> amyrlam Skeinforge Mon, 28 Oct 2013 18:44:22 -0400 https://reprap.org/forum/read.php?154,256412,258771#msg-258771 https://reprap.org/forum/read.php?154,256412,258771#msg-258771 ahmetcemturan Skeinforge Fri, 25 Oct 2013 05:24:52 -0400 https://reprap.org/forum/read.php?154,256412,258759#msg-258759 https://reprap.org/forum/read.php?154,256412,258759#msg-258759 -------------------------------------------------------
> @ahmetcemturan Sorry for the delay! See attached
> files. In my Gcode, F = 2400 at Layer 0 (Z = 0)
> and jumps to F = 6000 at Layer 1. Would like F to
> be 6000 throughout!

Because you have in Speed plugin:

Object First Layer Feed Rate Infill Multiplier (ratio): 0.4
Object First Layer Feed Rate Perimeter Multiplier (ratio): 0.4
Object First Layer Flow Rate Infill Multiplier (ratio): 0.4
Object First Layer Flow Rate Perimeter Multiplier (ratio): 0.4

6000*0.4 = 2400 for the 1st layer… you should set those parameters to 1…]]> François Delègue Skeinforge Fri, 25 Oct 2013 04:52:14 -0400 https://reprap.org/forum/read.php?154,256412,258757#msg-258757 https://reprap.org/forum/read.php?154,256412,258757#msg-258757 ahmetcemturan Skeinforge Fri, 25 Oct 2013 04:45:16 -0400 https://reprap.org/forum/read.php?154,256412,258607#msg-258607 https://reprap.org/forum/read.php?154,256412,258607#msg-258607 amyrlam Skeinforge Thu, 24 Oct 2013 17:51:14 -0400 https://reprap.org/forum/read.php?154,256412,257571#msg-257571 https://reprap.org/forum/read.php?154,256412,257571#msg-257571 Limit Disabled
Penultimate Gcode enabled...
I suspect that You are not really disabling the Limit Plugin.. (It could be finding a discrepant csv file elsewhere..)]]> ahmetcemturan Skeinforge Tue, 22 Oct 2013 04:38:29 -0400 https://reprap.org/forum/read.php?154,256412,257550#msg-257550 https://reprap.org/forum/read.php?154,256412,257550#msg-257550 amyrlam Skeinforge Tue, 22 Oct 2013 03:45:05 -0400 https://reprap.org/forum/read.php?154,256412,257538#msg-257538 https://reprap.org/forum/read.php?154,256412,257538#msg-257538 ahmetcemturan Skeinforge Tue, 22 Oct 2013 03:16:54 -0400 https://reprap.org/forum/read.php?154,256412,257443#msg-257443 https://reprap.org/forum/read.php?154,256412,257443#msg-257443
I'm tweaking/hacking Skeinforge to get the gcode output we want for a custom application, so ok for Z to start at 0.]]> amyrlam Skeinforge Mon, 21 Oct 2013 18:10:20 -0400 https://reprap.org/forum/read.php?154,256412,257437#msg-257437 https://reprap.org/forum/read.php?154,256412,257437#msg-257437 amyrlam Skeinforge Mon, 21 Oct 2013 17:33:28 -0400 https://reprap.org/forum/read.php?154,256412,256776#msg-256776 https://reprap.org/forum/read.php?154,256412,256776#msg-256776
You probably have value(s) in Bottom plugin, or in Raft/Operating Nozzle Lift over Layer Thickness.

(Bottom must be activated, even with 0 values, for Raft/Operating Nozzle Lift over Layer Thickness value to be taken in acount.)

I suppose you are sure of your Z values, not 1/10 mm but 1/100 mm scale? Z value at the beginning of a print should be more or less half of layer height, not 0…]]> François Delègue Skeinforge Sun, 20 Oct 2013 05:34:14 -0400 https://reprap.org/forum/read.php?154,256412,256479#msg-256479 https://reprap.org/forum/read.php?154,256412,256479#msg-256479 Disable Limit Plugin]]> ahmetcemturan Skeinforge Sat, 19 Oct 2013 04:39:07 -0400 https://reprap.org/forum/read.php?154,256412,256412#msg-256412 https://reprap.org/forum/read.php?154,256412,256412#msg-256412
(1) Why does Z start at 0.01 instead of 0? (Line 6)
(2) Why does F start at 2400 (Line 11) for what seems to be Layer 0, but be F 6000 (Line 187) elsewhere? I'd like F to be at 6000 throughout.

Would appreciate any help on how to tweak these settings, thank you!]]> amyrlam Skeinforge Fri, 18 Oct 2013 19:28:39 -0400