Hello Guys, i start recently to test skeinforge, but i did'nt find if it is possible to give other letter for the X axis, Y axis or E axis for the extrusion in the gcode file ? Thanks Marc https://reprap.org/forum/read.php?154,256598,256598#msg-256598 Thu, 21 May 2026 16:29:23 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?154,256598,257147#msg-257147 https://reprap.org/forum/read.php?154,256598,257147#msg-257147 After some research, i found in the python code, where the letter 'E' is printed and i modified this. Now its ok.

Thanks

Marc]]> marc_hsm Skeinforge Mon, 21 Oct 2013 04:09:58 -0400 https://reprap.org/forum/read.php?154,256598,256910#msg-256910 https://reprap.org/forum/read.php?154,256598,256910#msg-256910 In fact i use my own numerical control wich is made originaly for high speed milling. And in the "standard" (or more common) iso code for milling machines E is not a accepted as axis name letter. E is used for Local variables for example. For my test i use a brushless motor for extrusion and i need to manage an axis for this. If you are interested by the results, i can show you . For now i am building an extruder wheel because the motor is 8 mm diameter.

For your remark, can i use the replace.csv or do you mean to make replace in an text editor ?. My wish was for example to have somewhere parameters to name the axis as we would like to have.

Regards

Marc]]> marc_hsm Skeinforge Sun, 20 Oct 2013 13:04:50 -0400 https://reprap.org/forum/read.php?154,256598,256772#msg-256772 https://reprap.org/forum/read.php?154,256598,256772#msg-256772 François Delègue Skeinforge Sun, 20 Oct 2013 05:21:23 -0400 https://reprap.org/forum/read.php?154,256598,256598#msg-256598 https://reprap.org/forum/read.php?154,256598,256598#msg-256598
i start recently to test skeinforge, but i did'nt find if it is possible to give other letter for the X axis, Y axis or E axis for the extrusion in the gcode file ?
Thanks
Marc]]> marc_hsm Skeinforge Sat, 19 Oct 2013 13:20:35 -0400