Hi guys, i am fairly new to this, and have only just started messing about with Skienforge, and the Reprap software. Now in the Reprap software i am able to rotate the model and choose its orientation before i post the Gcode, can this also be done in Skienforge? as i have some models that should be in a different orientation when posting the Gcode. Thanks. Steve https://reprap.org/forum/read.php?154,37155,37155#msg-37155 Sat, 15 Aug 2026 02:59:25 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?154,37155,37261#msg-37261 https://reprap.org/forum/read.php?154,37155,37261#msg-37261 bjbsquared Skeinforge Thu, 25 Feb 2010 06:43:11 -0500 https://reprap.org/forum/read.php?154,37155,37181#msg-37181 https://reprap.org/forum/read.php?154,37155,37181#msg-37181 -------------------------------------------------------
> gotta admit the align Z feature in net fab is very
> easy to use!Good call with this bit of software.
>
> Steve

I´m more for the automatic and manual repair-functions.]]> MarcusWolschon Skeinforge Wed, 24 Feb 2010 15:51:37 -0500 https://reprap.org/forum/read.php?154,37155,37180#msg-37180 https://reprap.org/forum/read.php?154,37155,37180#msg-37180
Steve]]> sweaving Skeinforge Wed, 24 Feb 2010 15:47:20 -0500 https://reprap.org/forum/read.php?154,37155,37174#msg-37174 https://reprap.org/forum/read.php?154,37155,37174#msg-37174 -------------------------------------------------------
> thats a pain in the rear, but thanks for the
> advice and the link to the other thread. The
> meshlab work around seams todo the job..
>
> Steve

Try Netfabb to compare them for your taste.
It is believed to be much better.
(I have nit tried meshlab yet)]]> MarcusWolschon Skeinforge Wed, 24 Feb 2010 14:45:49 -0500 https://reprap.org/forum/read.php?154,37155,37169#msg-37169 https://reprap.org/forum/read.php?154,37155,37169#msg-37169
Steve]]> sweaving Skeinforge Wed, 24 Feb 2010 13:09:43 -0500 https://reprap.org/forum/read.php?154,37155,37161#msg-37161 https://reprap.org/forum/read.php?154,37155,37161#msg-37161
[dev.forums.reprap.org]]]> jeffpark_ Skeinforge Wed, 24 Feb 2010 10:32:59 -0500 https://reprap.org/forum/read.php?154,37155,37156#msg-37156 https://reprap.org/forum/read.php?154,37155,37156#msg-37156
... you have to adjust the orientation of your model in a CAD-program ...]]> VDX Skeinforge Wed, 24 Feb 2010 08:17:50 -0500 https://reprap.org/forum/read.php?154,37155,37155#msg-37155 https://reprap.org/forum/read.php?154,37155,37155#msg-37155
Thanks.
Steve]]> sweaving Skeinforge Wed, 24 Feb 2010 08:07:11 -0500