Ive been searching the forum to find out how SF42 can generate a raft that doesn't follow the outline of the printed part. Ive Printed the calibration cube with no problems however, when i tried to print the 3d vase that comes in the replicator g folders it prints a raft then prints the first layer of the part half on the raft half off. ive tried several different versions of SF and have run the output through repsnapper since my TZ gen 3 electronics will not run on anything else. Ive had some luck printing raftless on my lazercut build plate but i know that i will need the raft for larger prints. Any suggestions on how to fix this? https://reprap.org/forum/read.php?154,95787,95787#msg-95787 Sat, 10 Oct 2026 19:53:34 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?154,95787,95894#msg-95894 https://reprap.org/forum/read.php?154,95787,95894#msg-95894
lmpsnwbr Wrote:
-------------------------------------------------------
> is there anyway to fix this? i am using downloaded
> stl files for now since my desktop with solidworks
> is dead.
> I have netfab studio on my netbook, can that make
> the nessesary changes to a stl file to make it
> work?]]> Andrew Diehl Skeinforge Mon, 29 Aug 2011 10:33:32 -0400 https://reprap.org/forum/read.php?154,95787,95856#msg-95856 https://reprap.org/forum/read.php?154,95787,95856#msg-95856 If you are having problems with SF you can give SFACT a try..]]> ahmetcemturan Skeinforge Mon, 29 Aug 2011 04:02:14 -0400 https://reprap.org/forum/read.php?154,95787,95824#msg-95824 https://reprap.org/forum/read.php?154,95787,95824#msg-95824 I have netfab studio on my netbook, can that make the nessesary changes to a stl file to make it work?]]> lmpsnwbr Skeinforge Sun, 28 Aug 2011 20:45:28 -0400 https://reprap.org/forum/read.php?154,95787,95817#msg-95817 https://reprap.org/forum/read.php?154,95787,95817#msg-95817 jv4779 Skeinforge Sun, 28 Aug 2011 19:31:35 -0400 https://reprap.org/forum/read.php?154,95787,95787#msg-95787 https://reprap.org/forum/read.php?154,95787,95787#msg-95787
Ive had some luck printing raftless on my lazercut build plate but i know that i will need the raft for larger prints. Any suggestions on how to fix this?]]> lmpsnwbr Skeinforge Sun, 28 Aug 2011 15:12:35 -0400