Sanguino 1.3a with 1284p very long connect time with marlin ? Hy I bought a second Sanguino now with a 1284p instead of the 664p The time to connect to the board or uploading the firmware take very very long compared to the 664p (still gen6 and ramps are alot faster) Is there a possibility to speedup the loading times ? (removing unused code from marlin ? ) mfg Chri https://reprap.org/forum/read.php?158,154323,154323#msg-154323 Thu, 12 Mar 2026 10:23:44 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?158,154323,154764#msg-154764 Re: Sanguino 1.3a with 1284p very long connect time with marlin ? https://reprap.org/forum/read.php?158,154323,154764#msg-154764
I`ll built one and try it first with my 664p board.

I`m Using Marlin RC3, and i`m experimenting with Z-Jerk , but unfortunatly the LCD does not support Z-Jerk and some other stuff to change on the fly :(

mfg Chri]]> Chri Sanguino(lolu) Sun, 16 Sep 2012 16:23:30 -0400 https://reprap.org/forum/read.php?158,154323,154692#msg-154692 Re: Sanguino 1.3a with 1284p very long connect time with marlin ? https://reprap.org/forum/read.php?158,154323,154692#msg-154692 arduino.cc] , many others are available.

BTW., bootloader and firmware haven't neccessarily the same baud rate. Perhaps it's sufficient to upgrade the firmware.]]> Traumflug Sanguino(lolu) Sun, 16 Sep 2012 05:23:49 -0400 https://reprap.org/forum/read.php?158,154323,154589#msg-154589 Re: Sanguino 1.3a with 1284p very long connect time with marlin ? https://reprap.org/forum/read.php?158,154323,154589#msg-154589
Connecting to the printer 15 seconds.

So i need a eeprom burner to load another bootloader into the chip ?

mfg Chri]]> Chri Sanguino(lolu) Sat, 15 Sep 2012 13:37:27 -0400 https://reprap.org/forum/read.php?158,154323,154549#msg-154549 Re: Sanguino 1.3a with 1284p very long connect time with marlin ? https://reprap.org/forum/read.php?158,154323,154549#msg-154549 github.com] (click on "view raw").]]> Traumflug Sanguino(lolu) Sat, 15 Sep 2012 06:05:44 -0400 https://reprap.org/forum/read.php?158,154323,154323#msg-154323 Sanguino 1.3a with 1284p very long connect time with marlin ? https://reprap.org/forum/read.php?158,154323,154323#msg-154323
I bought a second Sanguino now with a 1284p instead of the 664p

The time to connect to the board or uploading the firmware take very very long compared to the 664p (still gen6 and ramps are alot faster)

Is there a possibility to speedup the loading times ? (removing unused code from marlin ? )

mfg Chri]]> Chri Sanguino(lolu) Fri, 14 Sep 2012 03:46:19 -0400