Hi, I bought a sc42sth47-1648a 1.8 degree 2 phase motor to use with a different extruder setup. When I received the motor, there are 4 wires sticking out of the motor with no connector at the end. I received no wiring diagram for the motor. The wire colors are black, blue, green and red. I looked into the opening they come out of and the red and green come from the right and the blue and black come from the left to exit that opening.. Anyone around that could give me an educated guess or knows the order I should put them into a connector to plug onto a ramps 1.4 board? Thanks, Vance. https://reprap.org/forum/read.php?160,504765,504765#msg-504765 Thu, 16 Apr 2026 07:05:25 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?160,504765,504896#msg-504896 https://reprap.org/forum/read.php?160,504765,504896#msg-504896 vhoward1122 Stepper Motors, Servo Motors, DC Motors Mon, 04 May 2015 10:45:20 -0400 https://reprap.org/forum/read.php?160,504765,504843#msg-504843 https://reprap.org/forum/read.php?160,504765,504843#msg-504843 [reprap.org]]]> gordonendersby Stepper Motors, Servo Motors, DC Motors Mon, 04 May 2015 07:18:00 -0400 https://reprap.org/forum/read.php?160,504765,504776#msg-504776 https://reprap.org/forum/read.php?160,504765,504776#msg-504776 http://www.jasonbabcock.com/computing/breadboard/unipolar/index.html]]> jbernardis Stepper Motors, Servo Motors, DC Motors Sun, 03 May 2015 23:11:54 -0400 https://reprap.org/forum/read.php?160,504765,504765#msg-504765 https://reprap.org/forum/read.php?160,504765,504765#msg-504765 I bought a sc42sth47-1648a 1.8 degree 2 phase motor to use with a different extruder setup. When I received the motor, there are 4 wires sticking out of the motor with no connector at the end. I received no wiring diagram for the motor. The wire colors are black, blue, green and red. I looked into the opening they come out of and the red and green come from the right and the blue and black come from the left to exit that opening.. Anyone around that could give me an educated guess or knows the order I should put them into a connector to plug onto a ramps 1.4 board?

Thanks, Vance.]]> vhoward1122 Stepper Motors, Servo Motors, DC Motors Sun, 03 May 2015 21:48:26 -0400