Reprap Forum - Job Shop: I need stuff made! p.s. RepRap.org isnt responsible for scams and bad deals. https://reprap.org/forum/list.php?163 Tue, 10 Mar 2026 05:03:05 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?163,847267,847267#msg-847267 Need a Designer who can produce an STL file for me (no replies) https://reprap.org/forum/read.php?163,847267,847267#msg-847267
Unfortunately, dealing with 3d models is not my cup of tea and I need a designer, modeler, or someone who is really good in SketchUp to create a an object for me for money. What I need done is to take an existing model from thingiverse (I'll provide the address) shrink the overall size and add my own features to it to be customized for an action figure of mine. I need to be able to bring it to a 3D print shop here in town so the STL file would need to be "Printable".

If you are capable of doing such thing, let me know and we discuss further over private message. I have written the details in WORD document, so if you're interested we can start from there. Applicants MUST be willing to accept PayPal for payments.

Thanks all and I look forward hearing from you.]]> Jecm33 Job Shop: I need stuff made! Sun, 17 Feb 2019 16:00:58 -0500 https://reprap.org/forum/read.php?163,845585,845585#msg-845585 2019 is help a n00b year (3 replies) https://reprap.org/forum/read.php?163,845585,845585#msg-845585
So after searching for local groups and support and finding pretty much nothing I am finally giving up and asking for help.

Im quite new at 3d printing but had churned out a good lot of prints on my new anycubic i3 mega until a "gift" from a friend in the form of unbranded pla killed not only my first hotend but my replacment hot end, so after failing miserably to fix the original 2 hotends I figured why not just get an e3d v6 upgrade as everyone seems to rave about .. so yeah its pretty much all installed but then to my horror I discovered a critical error on my part , I had not taken into account the height of the e3d v6 compared to the standard anycubic one.

So long story short my e3d v6 needs some extra parts for me to actually use it and catch 22 is I need the printer to print the parts to get the printer to print. fun times eh?

there are 2 small parts that need to be in abs so I can finally get back in the game , if anyone can help I would be eternally grateful and if I need to pay for it then so be it .

so yea help a n00b out so I can get my printer running again.

Thanks

-Ranzid]]> Ranzid Job Shop: I need stuff made! Tue, 19 Feb 2019 16:19:17 -0500 https://reprap.org/forum/read.php?163,827297,827297#msg-827297 Looking for accurate Nylon printing (no replies) https://reprap.org/forum/read.php?163,827297,827297#msg-827297 [www.thingiverse.com]

Axel.]]> ax2013 Job Shop: I need stuff made! Fri, 29 Jun 2018 13:30:31 -0400 https://reprap.org/forum/read.php?163,824486,824486#msg-824486 Need a part cut out from CF sheet (no replies) https://reprap.org/forum/read.php?163,824486,824486#msg-824486
Need included part to be CNC'ed from CF sheet, 5mm thick. This is for 3d printer so needs a stiff type of CF.
Please sent me a quote here or via PM.
I'm based in UK, someone local would be preferable...]]> hedeon Job Shop: I need stuff made! Mon, 04 Jun 2018 10:41:12 -0400 https://reprap.org/forum/read.php?163,820929,820929#msg-820929 Can someone cover for me whilst I am on holiday by printing a few jobs for me? (2 replies) https://reprap.org/forum/read.php?163,820929,820929#msg-820929
They need a few mugs printed, PLA would be fine, although I've been printing in ABS. Full fee paid to you. These do NOT need to be watertight or functional they are just prototypes and will be heavily finished/painted by the client. They just need to be reasonably dimensionally accurate.

They are UK (Bristol) based but would be happy to get items in the post. PM me if you can help.]]> DjDemonD Job Shop: I need stuff made! Thu, 09 Aug 2018 10:11:34 -0400 https://reprap.org/forum/read.php?163,805002,805002#msg-805002 Need accurate warp-free ABS parts printed (1 reply) https://reprap.org/forum/read.php?163,805002,805002#msg-805002
Link Here

It would probably need to be scaled up slightly to account for material shrink.]]> blt3dp Job Shop: I need stuff made! Thu, 09 Aug 2018 08:34:52 -0400 https://reprap.org/forum/read.php?163,760751,760751#msg-760751 Can someone print me this case from thingiverse for my touchscreen monitor (1 reply) https://reprap.org/forum/read.php?163,760751,760751#msg-760751 Case for LS-7T
printed and send to Germany (Mainz) ASAP. Please send me your offers and when you can print it for me.

Thanks]]> MilloMille Job Shop: I need stuff made! Wed, 19 Apr 2017 18:23:20 -0400 https://reprap.org/forum/read.php?163,721161,721161#msg-721161 Can someone mill my bearing housings (Aluminium/Steel)? (1 reply) https://reprap.org/forum/read.php?163,721161,721161#msg-721161
I'm designing the powder spread for an SLS Printer and need some aluminium/steel block housings for my bearings.
The bearing are these:

Iglidur H1 Flange.

Basically I'm looking for a block of Aluminium/Steel around 40mm x 20mm x 20mm. with a hole drilled for the bearings through the center of the block, one flange bearing will be fitted into each end of the block. Also 4 bolt holes drilled into one of the long 40mm sides for gantry to be screwed onto.

Thanks,
Waka]]> Waka Job Shop: I need stuff made! Thu, 17 Nov 2016 17:24:46 -0500 https://reprap.org/forum/read.php?163,711671,711671#msg-711671 Part needed scanning in UK (no replies) https://reprap.org/forum/read.php?163,711671,711671#msg-711671
Is there anyone that can scan a part for me? A price please.

The part is roughly 10cm x 10cm x 10cm]]> audiobull Job Shop: I need stuff made! Tue, 04 Oct 2016 14:07:19 -0400 https://reprap.org/forum/read.php?163,692489,692489#msg-692489 anyone willing to print abs for cost of filament + shipping? (no replies) https://reprap.org/forum/read.php?163,692489,692489#msg-692489
needs printer parts in abs, they need to be built well square flat and true. if parts arn't accurate i heard the printer won't be either so, yah, please know what your doing. i heard there's some nice folks here that will print the parts i just have to pay for the filament and shipping so, let me know.]]> The Borg Job Shop: I need stuff made! Thu, 28 Jul 2016 18:24:51 -0400 https://reprap.org/forum/read.php?163,682694,682694#msg-682694 Need housing printed (no replies) https://reprap.org/forum/read.php?163,682694,682694#msg-682694
two files, .STL, modeled in inches.

[s000.tinyupload.com]

[s000.tinyupload.com]]]> needsomething Job Shop: I need stuff made! Wed, 29 Jun 2016 16:13:51 -0400 https://reprap.org/forum/read.php?163,669814,669814#msg-669814 Missing Mendel parts - need help. (1 reply) https://reprap.org/forum/read.php?163,669814,669814#msg-669814 It appears that there were parts missing from the kit of plastic parts I originally purchased.

The file is attached and/or here is the link to the stl file on sourceforge. I need 4 of these manufactured.
[reprap.svn.sourceforge.net]

I needed them yesterday of course. :)

I live in New Zealand - any takers?]]> Antipodean Job Shop: I need stuff made! Wed, 01 Jun 2016 08:13:52 -0400 https://reprap.org/forum/read.php?163,647601,647601#msg-647601 Anyone in Canada with a well calibrated printer available for print jobs? (no replies) https://reprap.org/forum/read.php?163,647601,647601#msg-647601 DeltaDroid Job Shop: I need stuff made! Sat, 02 Apr 2016 14:55:32 -0400 https://reprap.org/forum/read.php?163,638454,638454#msg-638454 Anyone in Wilmington NC willing to print a hot end mount? (2 replies) https://reprap.org/forum/read.php?163,638454,638454#msg-638454
Bought a cheap kit and the hot end is horrible. Bought a new hot end but need a mount printed to use the hot end.

If your willing to help please send me a PM.

Thanks for reading!]]> Verrin13 Job Shop: I need stuff made! Thu, 24 Mar 2016 15:46:04 -0400 https://reprap.org/forum/read.php?163,631685,631685#msg-631685 Lasercut Ultimaker original (1 reply) https://reprap.org/forum/read.php?163,631685,631685#msg-631685 chris33 Job Shop: I need stuff made! Sun, 05 Feb 2017 16:17:16 -0500 https://reprap.org/forum/read.php?163,625675,625675#msg-625675 Where could I have 300*200 aluminium thick sheet cnc-ed for me in the UK/London? (3 replies) https://reprap.org/forum/read.php?163,625675,625675#msg-625675 I would like to use a 300x200 heat bed. The bed itself (alum + heater) isn't difficult to buy.
But that needs to sit atop a thick sheet. And because it's Ultimaker-themed the thick
sheet needs to be somewhat bigger than 300x200 - since it rides vertically on 12mm rods
and needs to have a driving nut attached for a lead screw. My plan is draw it in FreeCAD
and send to a good fellow or to some online CNC service to get done. I would hope
the maker to supply the material too.

Would anybody here be able to suggest a good place for me to get this thing manufactured in the UK?
I'm actually located in London if that matters.. Also anybody got any idea how thick it needs to be? 5mm?

Thx,]]> atagunov Job Shop: I need stuff made! Fri, 03 Jun 2016 06:17:15 -0400 https://reprap.org/forum/read.php?163,609101,609101#msg-609101 Need some transparent button caps / LED pipes (1 reply) https://reprap.org/forum/read.php?163,609101,609101#msg-609101
I build synthesizers on the MIDIbox platform. I've completed three synths, and am working on my fourth. The first two used semitransparent 3D printed plastic button caps and "light pipes" for LEDs (you can see them in the picture at the link above). I found the maker on this forum about three years ago who I used for my first two synths, but I haven't been able to contact them recently, so I figured I'd ask for someone new. I have a couple friends with 3D printers, but nobody with the transparent filament I need.

The parts are quite small, max dimension about 12 mm for the buttons, but I will need a couple hundred of each kind, so the order would still be moderately priced ($40-$80 range). Single material, any transparent plastic (the slightly bluish ABS pictured above works fine). I will provide STLs and work with you on getting the details right before the whole batch production (the buttons have a recess in the underside which may cause inconsistencies in printing, depending on your machine's capabilities). If the batch I receive works in my build, I also plan to sell these parts on the MIDIbox Shop in a kit for the synth's front panel, so a larger order would be on the horizon.

Let me know if you're interested. Reply, PM, or email me at my name at Google's email.

Thanks,
Sauraen]]> Sauraen Job Shop: I need stuff made! Wed, 16 Mar 2016 08:50:50 -0400 https://reprap.org/forum/read.php?163,605554,605554#msg-605554 wtb some 3d printed parts for my first printer (no replies) https://reprap.org/forum/read.php?163,605554,605554#msg-605554 These are the files that i need printed
[www.thingiverse.com]

List of what i need is as follows. the quantity of each part is in parenthesis
(2)3d print corner short repaired mirrored
(1) 3d y slide 2 repaired
(2) 3d print corner short repaired
(1) 3d y slide repaired
(1) bottom x slide
(1) top x slide
(4) belt holder
(2) vertical screw 2
(8) vertical rod holder
(2) vertical screw 1

Parts need to be printed out of abs with a 4mm shell thickness and a minimum 35% infill. Please give me a quote for the parts. Thank you for any help you are able to provide.

If you are willing to print some parts but not all, give me a price on the parts you can print and i will update the list as i get the parts.

I KNOW I AM NEW AND SOME MIGHT NOT BE WILLING TO WORK WITH A NEW GUY, BUT I WILL PAY THROUGH PAYPAL GOODS so we both are secured with the money.

BTW: I am out of Massachusetts USA]]> pochito413 Job Shop: I need stuff made! Wed, 06 Jan 2016 09:21:47 -0500 https://reprap.org/forum/read.php?163,604259,604259#msg-604259 need some parts printed to make my own printer (no replies) https://reprap.org/forum/read.php?163,604259,604259#msg-604259 parts
It is a total of 30 parts. The list is attached. Parts need to be abs 4 shell 35% infill. Please give me a quote]]> pochito413 Job Shop: I need stuff made! Mon, 04 Jan 2016 02:14:59 -0500 https://reprap.org/forum/read.php?163,602564,602564#msg-602564 Anyone in Austin willing to print me an Extruder (2 replies) https://reprap.org/forum/read.php?163,602564,602564#msg-602564 Thanks]]> prchallenger Job Shop: I need stuff made! Wed, 30 Dec 2015 17:12:09 -0500 https://reprap.org/forum/read.php?163,545339,545339#msg-545339 Dual syringe extruder (no replies) https://reprap.org/forum/read.php?163,545339,545339#msg-545339
I am looking to order a dual syringe extruder for 30ml-60ml syringes to work with Reprap Prusa i3 or another Reprap model

[www.thingiverse.com]

[stephentions.com]

If somebody can make something like this to work with reprap I am willing to order.

Please get in touch.

Many thanks.
Best regards,
Taya]]> Taisiya Job Shop: I need stuff made! Thu, 13 Aug 2015 12:12:03 -0400 https://reprap.org/forum/read.php?163,531468,531468#msg-531468 Need some of the larger parts for 3DR printed :) (1 reply) https://reprap.org/forum/read.php?163,531468,531468#msg-531468
3x Bottom motor mount

30% infill
2 perimeters
~.25 layer height
No raft


[github.com]


3x Electronic mounts

30% infill
2 perimeters
~.25 layer height
No raft


[github.com]
]]> Tennysballs Job Shop: I need stuff made! Tue, 08 Sep 2015 11:41:11 -0400 https://reprap.org/forum/read.php?163,525759,525759#msg-525759 I need some pulley modified (no replies) https://reprap.org/forum/read.php?163,525759,525759#msg-525759
There are 4 pulleys in total. All need to be bored for bearings, only 2 need to have the teeth removed.

If this is something you can do, shoot me a PM and we can talk further. I can provide drawings, CAD, etc.

-Greg]]> gmh39 Job Shop: I need stuff made! Wed, 24 Jun 2015 19:55:45 -0400 https://reprap.org/forum/read.php?163,513084,513084#msg-513084 Need parts printed for a Core XY build (1 reply) https://reprap.org/forum/read.php?163,513084,513084#msg-513084
I am building a 3D printer and need to have the attached parts printed. I have already nested them but also have the individual STLs available as well. Can anyone assist?

Please let me know the cost.

Thnaks!]]> jhelmstetter Job Shop: I need stuff made! Mon, 25 May 2015 14:11:41 -0400 https://reprap.org/forum/read.php?163,509663,509663#msg-509663 (UK) Need some rubber printed. (1 reply) https://reprap.org/forum/read.php?163,509663,509663#msg-509663 This is the Project.
http://www.thingiverse.com/thing:35120

What I need printed is Body3 and ribs.

Is anyone set up to print these out and how much?

BTW: Sorry but out of touch for the next week :(]]> GRAYWOLF Job Shop: I need stuff made! Thu, 02 Jun 2016 06:53:21 -0400 https://reprap.org/forum/read.php?163,503970,503970#msg-503970 I need some 20x40mm extrusion cut (1 reply) https://reprap.org/forum/read.php?163,503970,503970#msg-503970
I am located NYC (Queens, specifically) and would prefer someone local since it is a quick job, but I am willing to ship if need be.

You can just PM me with offers.

-Greg]]> gmh39 Job Shop: I need stuff made! Thu, 25 Jun 2015 23:48:16 -0400 https://reprap.org/forum/read.php?163,501706,501706#msg-501706 UK - Need these printed in ABS (10 replies) https://reprap.org/forum/read.php?163,501706,501706#msg-501706 repanrap Job Shop: I need stuff made! Wed, 29 Apr 2015 11:50:25 -0400 https://reprap.org/forum/read.php?163,498216,498216#msg-498216 I need this psu cover printing (UK) (4 replies) https://reprap.org/forum/read.php?163,498216,498216#msg-498216
[attachment 53064 PSU_Case.STL]

Thanks Nikki]]> Nikki81 Job Shop: I need stuff made! Thu, 14 Sep 2017 07:08:17 -0400 https://reprap.org/forum/read.php?163,486605,486605#msg-486605 Need a 3D Print : Fantasy Figure (1 reply) https://reprap.org/forum/read.php?163,486605,486605#msg-486605 by e-mail on request

Specs of the desired print:
- height between 7.5 to 12 cm
- plain color (black or brown or clay-yellow)
- hard plastic
- figure can be splitted into separate pieces for easy printing (I will assemble the pieces)
- version 2: joints can be added for movement of extremities, four images available where to place joints

Please quote me for a basic print, and a print with added joints. Thanks.]]> Sven.L Job Shop: I need stuff made! Fri, 27 Mar 2015 08:41:17 -0400 https://reprap.org/forum/read.php?163,482669,482669#msg-482669 Project parts (1 reply) https://reprap.org/forum/read.php?163,482669,482669#msg-482669
I would like to do the project at [www.instructables.com].
I was looking for feedback on this project and to buy the parts that need printed for this project.

Thanx.]]> KeliRay Job Shop: I need stuff made! Fri, 13 Mar 2015 14:34:31 -0400