Reprap Forum - Hello. I need a something designed. For money. GPL, industrial secret. Its all good. https://reprap.org/forum/list.php?164 Mon, 09 Mar 2026 19:59:46 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?164,842291,842291#msg-842291 Bondtech BMG mount for a P3Steel (3 replies) https://reprap.org/forum/read.php?164,842291,842291#msg-842291 siblues Hello. I need a something designed. For money. Sun, 02 Jun 2019 16:42:39 -0400 https://reprap.org/forum/read.php?164,776996,776996#msg-776996 Thule V2 590 inner mechanism (2 parts, female threaded, one reverse threaded) (no replies) https://reprap.org/forum/read.php?164,776996,776996#msg-776996
[www.thule.com]

I'll get pics of the part itself once I have it apart, but as far as I can tell, they are cylinders that are threaded on the inside to meet up with a tightening wheel in the middle. The problem is that they've stripped out, so they no longer clamp the bicycle's fork, keeping it steady as the car is traveling down the road.

Thule doesn't manufacture this carrier anymore, and this break is common. The threads need to be able to take some abuse, as they're bearing the weight of the clamp, which is holding the bike steady in winds.]]> BrokenThuleRackOwner Hello. I need a something designed. For money. Fri, 07 Jul 2017 15:59:28 -0400 https://reprap.org/forum/read.php?164,760764,760764#msg-760764 Simple Office Accessories product design Contest (no replies) https://reprap.org/forum/read.php?164,760764,760764#msg-760764
8wvyhu.jpg


We are in search of that dusty old idea of yours that has been laying somewhere in your closet or on your computer disk for a while now. The one that popped in your head when you faced a problem no one has solved yet. The one that you know could have a great impact on people’s lives but you just never found the time or resources to realize it.

CONTEST OVERVIEW
The theme of this contest is Simple Office Accessories. With which we wish to address everyday problems in your office. We believe you have some great solutions for these problems. The prize for the winner is 5.000€ + global promotion + product signature of the winner. Contest will end on 21st of May so don't wait too long. There is no entry fee.

We encourage you to submit more than one idea as this will give you better chances to be selected. We might buy out even more ideas.

FULL DESIGN BRIEF
]]> Invented4 Hello. I need a something designed. For money. Thu, 06 Apr 2017 08:43:39 -0400 https://reprap.org/forum/read.php?164,673053,673053#msg-673053 Small Home & Living Accessories Product Design Contest (no replies) https://reprap.org/forum/read.php?164,673053,673053#msg-673053
Banner_Home_and_living_ideas_1.jpg

We are in search of that dusty old idea of yours that has been laying somewhere in your closet or on your computer disk for a while now.
The one that popped in your head when you faced a problem no one has solved yet. The one that you know could have a great impact on people’s lives but you just never found the time or resources to realize it.


CONTEST OVERVIEW
The theme of this contest is Small Home & Living Accessories. We invite people to come up with design solutions for everyday problems in people’s homes.
The winner will be awarded 5.000€ and receive global promotion. Contest will last until the 5th of July and there is no fee to enter.

We encourage everyone to submit more than one idea as this will give them better chances to be selected. We might choose to buy out more than one idea.
]]> Invented4 Hello. I need a something designed. For money. Fri, 10 Jun 2016 08:10:05 -0400 https://reprap.org/forum/read.php?164,642286,642286#msg-642286 CAD Designer & CNC Robotics specialist looking for pocket money (1 reply) https://reprap.org/forum/read.php?164,642286,642286#msg-642286
If somebody needs something designed, please send me a pm.

I´m familiar with Autocad, Sketchup, milling/engraving/laser gcode creation and parsing, Arduino programming, have built a few robots and lots of other stuff, and i have the necessary equipment. CNC mill, lathe, laserplotter, multicolor and multimaterial printers, diagnostic tools, ...

If just a hotend holder or a complete cnc-machine, i make dreams come true for small money.
You´ll find more information about my projects and references on my homepage, see signature.

Best regards,

Nick]]> Kolbi Hello. I need a something designed. For money. Fri, 17 Jun 2016 12:59:32 -0400 https://reprap.org/forum/read.php?164,570718,570718#msg-570718 Looking for desiner for an Virtual Reality Camera Mount (Google Jump Project) (2 replies) https://reprap.org/forum/read.php?164,570718,570718#msg-570718 im looking for desiner to create an virtual reality camera mount.

Here is a refference picture what I want


Googles Mount
[www.youtube.com]

Google Jump Projekt
[www.google.com]

Thank in advance.
]]> lennie44 Hello. I need a something designed. For money. Sun, 13 Mar 2016 14:40:45 -0400 https://reprap.org/forum/read.php?164,529364,529364#msg-529364 E3D kraken (no replies) https://reprap.org/forum/read.php?164,529364,529364#msg-529364
Im wondering if someone could design a mount for the e3d kraken.

If so, the needs for the hotend is the following:

Kraken mount for Ultimaker alike, for 8mm Rods
Blower fan output maybe a blower om each side.
And cable/hose holder.

Thanks in advance]]> TRoager Hello. I need a something designed. For money. Sun, 05 Jul 2015 15:01:07 -0400 https://reprap.org/forum/read.php?164,421216,421216#msg-421216 M6D Socom (no replies) https://reprap.org/forum/read.php?164,421216,421216#msg-421216 RPearce Hello. I need a something designed. For money. Sat, 18 Oct 2014 15:13:33 -0400 https://reprap.org/forum/read.php?164,293627,293627#msg-293627 Cutting STL files (5 replies) https://reprap.org/forum/read.php?164,293627,293627#msg-293627 some of the files can fit in the build area but the base is not flat so, it will require cutting in half for a better print quality.

please contact me with your price after you check the files, some of them require no cutting its just i didn't want to delete them from the zip file.

[www.dropbox.com]

regards]]> rebuilder Hello. I need a something designed. For money. Sat, 05 Apr 2014 18:24:28 -0400 https://reprap.org/forum/read.php?164,284563,284563#msg-284563 Want to design and build custom printers in Indonesia? Or contribute in return for printer? (2 replies) https://reprap.org/forum/read.php?164,284563,284563#msg-284563
I'd like have help designing and building printers that can print much larger sizes - perhaps even as large as a full human, or at least as large as torso. Having more than two colors would also be preferable.

We have a large CNC router table here, and will eventually build a laser cutting table, so the frame and some other parts can easiliy be cut here.

From what I understand we'd need help with redesigning hardware and perhaps doing some alterations to Cura or other software. I'd also like help sourcing whatever hardware and electorinics that we can't make in-house from suppliers in China or wherever it is least expensive. I'm also not averse to making some electronics in house.

I'd like to build many of these larger machines.

I'd love to pay someones airfare to come out here and work and play using my budget. All expenses paid and then some. We have a great 4 story shop here, and many fun toys to play with, including a woodworking shop. There is even a possibility for a little profit sharing if we sell some of these larger printers.

Or if someone wants to contribute but does not want to fly out to Indonesia (on our dime) then I could send you a finished printer in return for your help.]]> indorap Hello. I need a something designed. For money. Wed, 25 Dec 2013 13:58:21 -0500 https://reprap.org/forum/read.php?164,279239,279239#msg-279239 Wade Spare Part / Ersatzteil (no replies) https://reprap.org/forum/read.php?164,279239,279239#msg-279239
mir ist beim Testen meines jetzt fertigestellten Prusa i2 der Niederhalter vom Wade Extruder gebrochen. Kann den mir jemand drucken? Gegen Geld natürlich.

Dieses Bauteil wäre das: [github.com] / wade-big.stl (ohne dem Wade Gehäuse, nur das kleine Gegenstück brauche ich)

Danke schonmal,
Grüße
md1978]]> md1978 Hello. I need a something designed. For money. Thu, 12 Dec 2013 18:31:11 -0500 https://reprap.org/forum/read.php?164,276621,276621#msg-276621 Software Design - RAMPS 1.4 Firmware (1 reply) https://reprap.org/forum/read.php?164,276621,276621#msg-276621
The extruder outputs E0 and E1 will need to function independently from one another, but with the same output requirements as described above.

Please send a PM to me with the time and cost for this project.

Thanks,
zip]]> zipfactor Hello. I need a something designed. For money. Mon, 09 Jun 2014 05:34:26 -0400 https://reprap.org/forum/read.php?164,271845,271845#msg-271845 new product needs printing (1 reply) https://reprap.org/forum/read.php?164,271845,271845#msg-271845
I was hoping that I may find someone who lives in the Bristol area who may have some experience with 3d printing, who owns a printer and who would be interested in a) helping me choose / set up a printer for my product and b) print a few prototypes so I can be sure this is the correct route to go with my product.

I am happy to pay the going rate for the models made and would be happy to reimburse time and expenses for any consultation.

Regards

Mark Bryant

www.gecko-dc.com]]> markbryant50 Hello. I need a something designed. For money. Tue, 26 Nov 2013 05:21:59 -0500 https://reprap.org/forum/read.php?164,269633,269633#msg-269633 Just a few Deltabots (1 reply) https://reprap.org/forum/read.php?164,269633,269633#msg-269633 Would be great if the model could be animated to move in the correct way. Technically the model does not have to be too sophisticated, just a model that will demo the basic principle and cinematics.
If you have a free model (GNU etc.) or you are able to put something like this together, contact me via PM.
Can offer small allowance or donation.]]> maboo Hello. I need a something designed. For money. Fri, 22 Nov 2013 09:39:45 -0500 https://reprap.org/forum/read.php?164,247544,247544#msg-247544 Open Source Air Filter (no replies) https://reprap.org/forum/read.php?164,247544,247544#msg-247544
We bagan a group called aaaiiirrr.org and are workiing on an open source indoor air filter,

Email us if you are interestedf in getting involved at info@aaaiiirrr.org

Best

Berni]]> bwar Hello. I need a something designed. For money. Sun, 22 Sep 2013 05:12:17 -0400 https://reprap.org/forum/read.php?164,244088,244088#msg-244088 Design quote for a small case, plus 1 off print needed (UK) (1 reply) https://reprap.org/forum/read.php?164,244088,244088#msg-244088
I'm new to this community, based in the UK, and I've registered as I am looking for someone to design us a plastic case for an electronic product.
I have "pen sketched" drawings, and a Huxley, but we don't have a 3D designer on board.

I have commercial quotes, but thought I would also throw it open to the community here, as the design work here is impressive.

I need a quote for a 2 piece case to specification (will be measuring about 80mmx60mmx10mm), has radiused edges, with some internal mounts and a compartment for a battery. I'd also like one supplied (3D printed). The design needs to be suitable for injection moulding or vacuum forming.
I am not an expert in these areas, so we need someone who has some experience of manufacture.

I am sure the skills are here to do it, if you could PM me a price and where I can find an example of your work. I am not looking for the cheapest designer I can get, but I need a timescale within a couple of weeks.

Please PM me, and I'll drop to email, it's fully funded, so I just need to find someone to do it.

best regards,

David.]]> DaveS Hello. I need a something designed. For money. Tue, 18 Mar 2014 00:28:40 -0400 https://reprap.org/forum/read.php?164,169929,169929#msg-169929 Engineering Internship in Maryland (USA) with stipend (7 replies) https://reprap.org/forum/read.php?164,169929,169929#msg-169929 Simba Hello. I need a something designed. For money. Fri, 30 Aug 2013 12:34:31 -0400 https://reprap.org/forum/read.php?164,159253,159253#msg-159253 Fallen Caryatid Carrying her Stone (no replies) https://reprap.org/forum/read.php?164,159253,159253#msg-159253
If you can scan her then I'd also like a quote depending on how difficult this would be. I've never commissioned a "scan" before, so I'm not sure how that goes.

Thank you!]]> Sniper4395 Hello. I need a something designed. For money. Mon, 08 Oct 2012 01:34:37 -0400 https://reprap.org/forum/read.php?164,155245,155245#msg-155245 Need To Print Sets Of Notebook Battery Latches (6 replies) https://reprap.org/forum/read.php?164,155245,155245#msg-155245
My Name is hector I’m new to the Reprap community, even I'm going nuts to buy and build a 3D printer, i won’t have the time to do so, since i got a production to finish and I’m 10 behind. Why?

Well i own a computer company, we only do wholesale, we buy, off lease (used) Desktop/ Workstations computers, LCD monitor and Notebooks. Most of the times our clients ask us to refurbish them. We bought 200 Mini Notebooks for one client and we found that around 50 of them are missing the battery release but, or battery latch.
I already have created the Parts in Google Sketch up, and I can transfer them to DWG (AutoCad).

They are small parts, about 6mm-W x 17mm-L x 4mm-H. Please see attach pix , since the latch has 2 small pressure post that clips in to the pivot that locks the battery I need them to be print in the best resolution in black color. Please send me your post with your quote, and delivery time. I will prefer someone with sales records on eBay. I will paid next day delivery via fedex for sample proof before you start production, and yes, if we get in to an agreement i will place a deposit and the rest of the payment once the sample are tested and approve.

Thanks in advance, hope you can help me.

Best Regards,

Hector Marquez
Akai Tech Corp
Miami, FL 33166

P.S. I sell computers, So i got Desktops C2D 2 Dell Brand custom config(memory and HDD size you'll Like), and we have 4 HP WorkStation C2D That are excelent for CAD work. I got 19" "B" Grade LCD monitors ("B" small dark spot on screeen) at very low cost and also i got 22" LCD "B" Grade at excelent Price, you let me know maybe we can exchange.]]> HectorM Hello. I need a something designed. For money. Wed, 17 Oct 2012 15:37:28 -0400 https://reprap.org/forum/read.php?164,150194,150194#msg-150194 Looking for Desiner to Design Minipos (2 replies) https://reprap.org/forum/read.php?164,150194,150194#msg-150194
I am looking for ID + Mechanical designer for Mini POS.

Here is a refference picture what I want [en.iei.com.cn] .

But we need to create a unique different deisgn with adding option feature of Customer Displya & Barcode Reader.


Thanks & Regards

Piyush Verma]]> piyush Hello. I need a something designed. For money. Fri, 05 Oct 2012 06:24:31 -0400 https://reprap.org/forum/read.php?164,145854,145854#msg-145854 Project Boxes (mini computer cases) - Buffalo, NY (no replies) https://reprap.org/forum/read.php?164,145854,145854#msg-145854
Email me at t13productions@gmail.com for more details.
thanks/]]> t13prodigy Hello. I need a something designed. For money. Wed, 01 Aug 2012 19:43:20 -0400 https://reprap.org/forum/read.php?164,122415,122415#msg-122415 enclosure for mainboard (1 reply) https://reprap.org/forum/read.php?164,122415,122415#msg-122415
I am very new to the RepRap community. I am looking for someone who is able to design an enclosure for a notebook mainboard. The goal is to make a desktop enclosure for a batch of notebook mainboards.

If intersted I can send you more details.

Thanks.]]> joergh Hello. I need a something designed. For money. Mon, 05 Mar 2012 14:46:53 -0500 https://reprap.org/forum/read.php?164,107977,107977#msg-107977 3d printer outputs need !! (1 reply) https://reprap.org/forum/read.php?164,107977,107977#msg-107977 I need some help and i am new for this forum
[www.thingiverse.com]
[www.thingiverse.com]

i need to make hand assembly but i dont have 3d printer who can help me with best price ?

at the project 9 diffirent items . and totally 37 units. Color can be white or colourful if it is possible like (http://www.thingiverse.com/thing:2408) and i can pay with ebay . i live in turkey. please send your bids to my mail adress omeroruc000@hotmail.com
thx all]]> omercyprus Hello. I need a something designed. For money. Tue, 29 Nov 2011 05:47:11 -0500 https://reprap.org/forum/read.php?164,106470,106470#msg-106470 Nozzle Selection (2 replies) https://reprap.org/forum/read.php?164,106470,106470#msg-106470 Anyway the nozzle does not look as a interchangeable part without the rest of the hot end.
I read that it is better begin with the bigger one 0.5mm; and just after doing some good jobs with that, test the smaller ones 0.35mm and 0.25mm. And they say that it is more difficult start with the smaller ones. It sound obvious because it is easier melt through a bigger hole. But that it is not related with the printing goal itself.
I have also a similar doubt about of the diameter of the filament (3mm or 1.75mm) that implies to change the extruder kit also? How to select it?
Sorry for my English (it is not my first language)]]> jairoma01 Hello. I need a something designed. For money. Thu, 17 Nov 2011 18:04:39 -0500 https://reprap.org/forum/read.php?164,98379,98379#msg-98379 Unique Water Container (4 replies) https://reprap.org/forum/read.php?164,98379,98379#msg-98379
The total fluid capacity should be about 32oz. The inside of the top needs to include a threaded portion that would allow a cap to screw in.

Would anybody be interested in helping us create this prototype?

Thanks,
Matt
www.projectlivingwell.com]]> mattjohnsn Hello. I need a something designed. For money. Fri, 04 Oct 2013 12:56:33 -0400 https://reprap.org/forum/read.php?164,94087,94087#msg-94087 Threaded component needed (23 replies) https://reprap.org/forum/read.php?164,94087,94087#msg-94087 I'm looking for a part to be designed & printed. I was hoping someone here would be up to the challenge. :)

What I need is one of these "Self reversing screws":

[www.abssac.co.uk]

This is to be a component in a pet project of mine, making a mechanism for a hose reel that layers the hose neatly as it winds in.

The bar should be approx 25mm diameter, thread depth of 4 mm, width 4mm, with one turn every 12mm. The screw should be 400mm long (two smaller sections that fit together may be easier to print) with the centre 300mm threaded & 50mm on each end left blank. The rod should have a 10mm hole in the centre for a threaded bar for fixing & strengthening purposes. Take special note of how the thread ends & reverses on the link above!

Budget is "as little as possible",.. but obviously I don't expect anything for free.

I understand the thread may be a little rough from the printing process, but would hope that it could be cleaned up with a file (Print the walls thick please!)

This is the most complex part of my reel, so I'm willing to adjust the rest of the design to make the production of this part a possibility, or at least easier.

Let me know what you can do. :)]]> Njones Hello. I need a something designed. For money. Wed, 24 Aug 2011 05:49:58 -0400 https://reprap.org/forum/read.php?164,90207,90207#msg-90207 Electronics/programmer for worker controlled company (2 replies) https://reprap.org/forum/read.php?164,90207,90207#msg-90207
Once up and running, it'll be like owning your own company, each person having control over a portion of the companies money, able to spend that money on the company, in whatever why they see fit. Also have some control of your own time, to direct it into projects you feel are important and stuff.

It'll be a lot like owning your own company, only without all the stress.

Anyone out there interested?

Tony]]> Ant Hello. I need a something designed. For money. Sun, 21 Jul 2013 04:27:27 -0400 https://reprap.org/forum/read.php?164,81136,81136#msg-81136 25 cm turbine assembly (1 reply) https://reprap.org/forum/read.php?164,81136,81136#msg-81136
budget: $200 USD payable upon proof of completion.

deliverables: design files and 2 prototypes

The ideal candidate will be able to provide a reference (preferably from a professor) and will be able to offer some paid consulting helping us set-up our own 3D printer. We anticipate needing design work down the road.


Tim Allen, CISSP
COO WestWind Power, Inc.
+01 502 410 1348]]> tallenintegsys Hello. I need a something designed. For money. Thu, 04 Aug 2011 00:42:43 -0400 https://reprap.org/forum/read.php?164,71040,71040#msg-71040 need: high power LED placement array + anciliaries (2 replies) https://reprap.org/forum/read.php?164,71040,71040#msg-71040
Am looking for a designer who'll work with me to create a LED array (placement + drill pattern) so I can create any sized array of high power LED's

This is primarily a design and initial print of at least 3, maybe 4 different parts each will interlock to produce the overall design and be expandable both X and Y axis

Would I like to "own" the overall design (of course) but you'd get the initial profits from the initial design... I would be open to myself having exclusive access to the design for x amount of time as well which I would hope will reduce overall design/printing costs

Let me know if you're intersted (and what you're likely to charge either by the hour or by the job)

Andy

ps, I'm located in USA (Atlanta) and have no problem purchasing printer to make my own "prints" if I get to own the design....]]> abrookfield Hello. I need a something designed. For money. Tue, 17 Apr 2012 22:28:20 -0400 https://reprap.org/forum/read.php?164,64326,64326#msg-64326 Ankle 9V battery compartment (10 replies) https://reprap.org/forum/read.php?164,64326,64326#msg-64326
For whoever helps and get this things just right, i will return the favor by sending them a printed copy of it in black or natural PLA. Maybe some cash, if we work something out first.

The requirements are:
-Must be able to hold a standard 9V battery securely inside a compartment
-Must have eye loops on either side for attaching a strap
-Must be ergonomic so it will be comfortable to wear just above your ankle as shown in the poorly drawn pictures

Other than this, please be creative! Thank you! :)]]> CidVilas Hello. I need a something designed. For money. Sun, 21 Jul 2013 04:39:36 -0400