Hi everyone, I recently got this delta printer (Micromake D1). It is much better than the i3 had before but it is way too complicated in terms of understanding settings and what not. I am having a weird problem, I have attached a photo. I printed a tube like structure and it seems like there is a lot of layer shifting going on or might be something else, I don't know. Can someone please tell me how I can solve this problem? The problem is, the gear-like shaped tube is supposed to be absolutely straight, but as you can see the outline is anything but that. Can someone shed light on this matter? Thanks! https://reprap.org/forum/read.php?178,699470,699470#msg-699470 Fri, 09 Oct 2026 18:24:48 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?178,699470,699586#msg-699586 https://reprap.org/forum/read.php?178,699470,699586#msg-699586 If you are using wheels for the linear movement, I would say it's likely your wheels are bad.
This is a common problem in cheap Delta kits that use wheels. (Especially ones that use white nylon door roller wheels)]]> PvtPrivate Delta Machines Fri, 12 Aug 2016 03:15:08 -0400 https://reprap.org/forum/read.php?178,699470,699511#msg-699511 https://reprap.org/forum/read.php?178,699470,699511#msg-699511 scarecrow2k6 Delta Machines Thu, 11 Aug 2016 20:37:46 -0400 https://reprap.org/forum/read.php?178,699470,699470#msg-699470 https://reprap.org/forum/read.php?178,699470,699470#msg-699470 scarecrow2k6 Delta Machines Thu, 11 Aug 2016 16:06:54 -0400