Hey there, I´m just the next nerd whos trying to build a rotary 3d-Printer like a record player. A rotating buildplate and a arm, who also describes a circle wich crosses exactly threw the center of the buildplate. I created some basic hardware wich is good enough to get the most importat part on track: the Firmware. I realized there has bee several projects talking about printers like this but no one came up with a public version of Marlin. Ok there is R-360 but he has olny one circle and one linear axis. I had a look into this Marlin version but I don´t think it is suitable for me and my limited knowledge about coding. So I came up with the idea to exploid some up to date marlin´s scara code for my project. After all there are two axis wich are already using polar coordinates and I was hoping just to adapt it somehow. Examining the Marlin_main.cpp I realized that I am not quite able whats happening there. Appart form some other things I found this: float a_sin = sin(RADIANS(a)) * L1, a_cos = cos(RADIANS(a)) * L1, b_sin = sin(RADIANS(b)) * L2, b_cos = cos(RADIANS(b)) * L2; but I coudn´t find out what ore were the definition fo (a) and (b) takes place L1 and L2 are the arms so much I was able to find out. Thats just an example... it goes on and on and I just cannot get a hang of it. So my questions are: 1st. ist there by any chance a Malin firmware present for download wich works with this kind of setup? I coud not find any but it took me ages to find R-360. So maybe there is something out there and I just don´t know. 2nd. ist there any recource wich kind of logicly explains how the scara setup in marlin is implemented? Essencially I have to change some stuff of the calculation and movie the ankle points somehow to the location were they are. And the speeds inclination has to be reversed. I cannot understand the marlin_main.cpp its a bit to high for me... any help or hint would be appreaciated. I just wanna get this thing to work. Then I will continue on the hardware. best, Florian https://reprap.org/forum/read.php?185,855616,855616#msg-855616 Sat, 08 Aug 2026 00:01:49 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?185,855616,855621#msg-855621 https://reprap.org/forum/read.php?185,855616,855621#msg-855621 So it should run on cheap boards and therefore I´d prefer using marlin.]]> plasticmonk Polar Machines, SCARA, Robot Arms Tue, 25 Jun 2019 17:49:49 -0400 https://reprap.org/forum/read.php?185,855616,855618#msg-855618 https://reprap.org/forum/read.php?185,855616,855618#msg-855618 dc42 Polar Machines, SCARA, Robot Arms Tue, 25 Jun 2019 16:21:08 -0400 https://reprap.org/forum/read.php?185,855616,855616#msg-855616 https://reprap.org/forum/read.php?185,855616,855616#msg-855616 I´m just the next nerd whos trying to build a rotary 3d-Printer like a record player. A rotating buildplate and a arm, who also describes a circle wich crosses exactly threw the center of the buildplate.
I created some basic hardware wich is good enough to get the most importat part on track: the Firmware.
I realized there has bee several projects talking about printers like this but no one came up with a public version of Marlin. Ok there is R-360 but he has olny one circle and one linear axis. I had a look into this Marlin version but I don´t think it is suitable for me and my limited knowledge about coding.

So I came up with the idea to exploid some up to date marlin´s scara code for my project. After all there are two axis wich are already using polar coordinates and I was hoping just to adapt it somehow. Examining the Marlin_main.cpp I realized that I am not quite able whats happening there.

Appart form some other things I found this:

float a_sin = sin(RADIANS(a)) * L1,
a_cos = cos(RADIANS(a)) * L1,
b_sin = sin(RADIANS(b)) * L2,
b_cos = cos(RADIANS(b)) * L2;

but I coudn´t find out what ore were the definition fo (a) and (b) takes place L1 and L2 are the arms so much I was able to find out. Thats just an example... it goes on and on and I just cannot get a hang of it.

So my questions are:
1st. ist there by any chance a Malin firmware present for download wich works with this kind of setup? I coud not find any but it took me ages to find R-360. So maybe there is something out there and I just don´t know.
2nd. ist there any recource wich kind of logicly explains how the scara setup in marlin is implemented? Essencially I have to change some stuff of the calculation and movie the ankle points somehow to the location were they are. And the speeds inclination has to be reversed. I cannot understand the marlin_main.cpp its a bit to high for me...

any help or hint would be appreaciated. I just wanna get this thing to work. Then I will continue on the hardware.

best,
Florian]]> plasticmonk Polar Machines, SCARA, Robot Arms Tue, 25 Jun 2019 15:56:38 -0400