I know its kind of a goofy question but I was wondering if anyone has tried to add a direct Extruder esteps per mm adjustment control to any version of repsnapper or any of the host softwares could be made to do this? https://reprap.org/forum/read.php?218,164699,164699#msg-164699 Sun, 17 May 2026 11:38:12 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?218,164699,169815#msg-169815 https://reprap.org/forum/read.php?218,164699,169815#msg-169815
Extrusion Multiplier - 1 denotes actual length
Extrusion Multiplier - 0.5 denotes 50 % of actual length

If your Machine Extrusion is calibrated wrong try with Firmware modification
else for temporary change you can use Extrusion Multiplier]]> imecproto RepSnapper Wed, 05 Dec 2012 10:20:21 -0500 https://reprap.org/forum/read.php?218,164699,165843#msg-165843 https://reprap.org/forum/read.php?218,164699,165843#msg-165843 gcode M92 with an E parameter can do this. The host software only need a way to send gcodes manually then (repsnapper can).]]> DeuxVis RepSnapper Tue, 13 Nov 2012 05:42:01 -0500 https://reprap.org/forum/read.php?218,164699,164699#msg-164699 https://reprap.org/forum/read.php?218,164699,164699#msg-164699 Chaacman RepSnapper Tue, 06 Nov 2012 18:15:56 -0500