Print stopping unexpectedly Hello, recently bought a ramp shell 1.4 and am using the Arduino Mega 1280 with the 10.10 pronterface and ubuntu, but I had problems with printing, because each time the print in the middle, someone could help me with this? thank you ps. worked hard to put part of buffer'm not getting satisfactory results using firmware sprinter https://reprap.org/forum/read.php?219,105107,105107#msg-105107 Mon, 13 Apr 2026 01:24:42 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?219,105107,155487#msg-155487 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,155487#msg-155487 ekaggrat RAMPS Electronics Thu, 20 Sep 2012 03:09:31 -0400 https://reprap.org/forum/read.php?219,105107,108092#msg-108092 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,108092#msg-108092
Roy]]> roygpa RAMPS Electronics Mon, 28 Nov 2011 18:01:35 -0500 https://reprap.org/forum/read.php?219,105107,108087#msg-108087 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,108087#msg-108087 bryanandaimee RAMPS Electronics Mon, 28 Nov 2011 17:35:20 -0500 https://reprap.org/forum/read.php?219,105107,107996#msg-107996 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,107996#msg-107996
Where can I get one of those ferrous torus magnets?

Roy]]> roygpa RAMPS Electronics Sun, 27 Nov 2011 21:58:39 -0500 https://reprap.org/forum/read.php?219,105107,107947#msg-107947 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,107947#msg-107947 rhmorrison RAMPS Electronics Sun, 27 Nov 2011 14:19:51 -0500 https://reprap.org/forum/read.php?219,105107,107602#msg-107602 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,107602#msg-107602 danielramos00 RAMPS Electronics Thu, 24 Nov 2011 16:39:45 -0500 https://reprap.org/forum/read.php?219,105107,106692#msg-106692 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,106692#msg-106692 CeeThreeEs RAMPS Electronics Fri, 18 Nov 2011 07:37:00 -0500 https://reprap.org/forum/read.php?219,105107,106615#msg-106615 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,106615#msg-106615
My result was different. EMI disconnects (or maybe reconnection) would reset my Arduino MEGA when printing from SD (so print was stopped).

misan]]> misan RAMPS Electronics Thu, 17 Nov 2011 18:51:56 -0500 https://reprap.org/forum/read.php?219,105107,106520#msg-106520 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,106520#msg-106520
I didn't test with endstops unplugged, but, yes, it could still happen with them unplugged as it was just electical noise in my circuit which was sometimes enough to register on the arduino pin being used for endstop testing.

The EMI disconnect shouldn't cause you trouble when printing from SD - I've had them while printing from SD and the print has continued ok. However, the fact that they occur means that there is something up with the electronics which can cause other issues.

Note that when I was getting spurious end stop activations, they were only momentary and didn't stop the print - they just caused it to go a bit haywire as illustrated here.]]> CeeThreeEs RAMPS Electronics Thu, 17 Nov 2011 08:43:52 -0500 https://reprap.org/forum/read.php?219,105107,106496#msg-106496 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,106496#msg-106496 evans2481 RAMPS Electronics Thu, 17 Nov 2011 05:18:56 -0500 https://reprap.org/forum/read.php?219,105107,106453#msg-106453 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,106453#msg-106453 forums.reprap.org)]]> CeeThreeEs RAMPS Electronics Wed, 16 Nov 2011 19:25:07 -0500 https://reprap.org/forum/read.php?219,105107,106288#msg-106288 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,106288#msg-106288
2011-11-15%2B10.18.50.jpg


A ferrite torus was enough to stop my computer to get USB disconnects caused by EMI.

misan
]]> misan RAMPS Electronics Tue, 15 Nov 2011 10:19:33 -0500 https://reprap.org/forum/read.php?219,105107,106220#msg-106220 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,106220#msg-106220 I could not debug the error still]]> danielramos00 RAMPS Electronics Mon, 14 Nov 2011 19:27:04 -0500 https://reprap.org/forum/read.php?219,105107,106197#msg-106197 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,106197#msg-106197 danielramos00 RAMPS Electronics Mon, 14 Nov 2011 16:43:00 -0500 https://reprap.org/forum/read.php?219,105107,106046#msg-106046 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,106046#msg-106046
Sorry just got back to your PM. Not sure if I can help - is your printer stopping completely, or pausing? IE missing or skipping steps? I have a very similar setup to yours and have had trouble with missing steps. Never fully resolved though, my latest effort to fix is adjusting the buffer like this - [forums.reprap.org]

Hard to tell if it worked or not though - have previously gotten through three hour prints only to have the problem re occur ...

Might look at the driver again and retest with windows too. This seems to be quite a broad issue and not based on a single cause. Opto end stops can cause trouble, power supplies too, usb cables, pololu settings all seem to be possible influences.

Anyway let us know how you get on / got on. I'd be particularly interested to see if that buffering link above has any effect for you.

John]]> evans2481 RAMPS Electronics Sun, 13 Nov 2011 19:54:48 -0500 https://reprap.org/forum/read.php?219,105107,105801#msg-105801 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,105801#msg-105801
misan]]> misan RAMPS Electronics Sat, 12 Nov 2011 03:28:23 -0500 https://reprap.org/forum/read.php?219,105107,105790#msg-105790 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,105790#msg-105790 danielramos00 RAMPS Electronics Fri, 11 Nov 2011 22:24:42 -0500 https://reprap.org/forum/read.php?219,105107,105774#msg-105774 Re: Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,105774#msg-105774
misan]]> misan RAMPS Electronics Fri, 11 Nov 2011 18:53:19 -0500 https://reprap.org/forum/read.php?219,105107,105107#msg-105107 Print stopping unexpectedly https://reprap.org/forum/read.php?219,105107,105107#msg-105107 thank you
ps. worked hard to put part of buffer'm not getting satisfactory results using firmware sprinter]]> danielramos RAMPS Electronics Mon, 07 Nov 2011 17:23:58 -0500