Hello Pare, Just arrived in Tagaytay from Singapore and about to start my first 3D printer. Who can give me a good source for motors and electronics in MM/Alabang/Tagaytay? I am almost complete with a design for a T-slot bot, but looks like I will be starting with a wolfstrap while I source the aluminium (yes I'm a Scot). BillC54 https://reprap.org/forum/read.php?220,85861,85861#msg-85861 Tue, 08 Sep 2026 03:00:09 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?220,85861,236290#msg-236290 https://reprap.org/forum/read.php?220,85861,236290#msg-236290
I'm wondering if I can locally source the ff here in the philippines.. preferebly from a store front.

arduino mega, ramps, pololu drivers or sangiunololu, pololu drivers
heatbed
linear bearings, mech endstops, thermistors, toothed belts and pulleys
smooth and threaded rods (any with square form threads?)
nema 17 steppers (i pref kysan)

reprap specific: (doubt if available)
metal z-couplers (flexible metal thingy kind), and anyone fabricated a decent hot end?

thanks for any info]]> DerekK Philippines RepRap User Group Thu, 15 Aug 2013 18:10:54 -0400 https://reprap.org/forum/read.php?220,85861,232733#msg-232733 https://reprap.org/forum/read.php?220,85861,232733#msg-232733 AA Aluminum]]> Erwin Philippines RepRap User Group Sun, 04 Aug 2013 19:45:36 -0400 https://reprap.org/forum/read.php?220,85861,217860#msg-217860 https://reprap.org/forum/read.php?220,85861,217860#msg-217860
Did you source the t-slot aluminum here in the Philippines? I've been looking for suppliers and no seems to know what it is let alone where to find it. If you can please let me know where you got it. Thanks]]> bigdlou Philippines RepRap User Group Wed, 12 Jun 2013 22:20:56 -0400 https://reprap.org/forum/read.php?220,85861,207390#msg-207390 https://reprap.org/forum/read.php?220,85861,207390#msg-207390 Admathaideas Philippines RepRap User Group Fri, 10 May 2013 17:54:52 -0400 https://reprap.org/forum/read.php?220,85861,197595#msg-197595 https://reprap.org/forum/read.php?220,85861,197595#msg-197595
its been too long since i checked e-gizmo prices, but they are the only game in town that I know and maybe they are taking advantage of this and monopolizing the market. Alexan is the close competitor but they mainly sell components and servo motors, i didn't find any stepper motors on their website

JoeMoney]]> joeglens Philippines RepRap User Group Fri, 05 Apr 2013 08:08:06 -0400 https://reprap.org/forum/read.php?220,85861,197587#msg-197587 https://reprap.org/forum/read.php?220,85861,197587#msg-197587
i'm buying again from ebay. motors are from china. :( methinks it will cost me around 2k including duties and taxes(~25% of cost)

pero kung meron kayong spare, di ko tatanggihan :P]]> f3rDz Philippines RepRap User Group Fri, 05 Apr 2013 07:41:37 -0400 https://reprap.org/forum/read.php?220,85861,111627#msg-111627 https://reprap.org/forum/read.php?220,85861,111627#msg-111627 metzindustries Philippines RepRap User Group Fri, 30 Dec 2011 06:51:36 -0500 https://reprap.org/forum/read.php?220,85861,100245#msg-100245 https://reprap.org/forum/read.php?220,85861,100245#msg-100245
E-Gizmo did the business. They only sell surplus motors but after a little time I got what I need for the wolfstrap and also some larger motors for a diy cnc machine. Amazed to see they also have a large range of ballscrews at very reasonable prices.

The Gizduino uses Atmega168, and their new micro-stepping card is also just right for a repstrap.

Now I only need to find/buy/make my hot end and extruder.]]> BillC54 Philippines RepRap User Group Thu, 06 Oct 2011 04:32:43 -0400 https://reprap.org/forum/read.php?220,85861,90478#msg-90478 https://reprap.org/forum/read.php?220,85861,90478#msg-90478
[www.e-gizmo.com]

They are located at 2nd Floor, VSC Building, 2313 Taft Ave., Malate, Manila.]]> joeglens Philippines RepRap User Group Wed, 13 Jul 2011 15:11:50 -0400 https://reprap.org/forum/read.php?220,85861,85861#msg-85861 https://reprap.org/forum/read.php?220,85861,85861#msg-85861
Just arrived in Tagaytay from Singapore and about to start my first 3D printer.

Who can give me a good source for motors and electronics in MM/Alabang/Tagaytay?

I am almost complete with a design for a T-slot bot, but looks like I will be starting with a wolfstrap while I source the aluminium (yes I'm a Scot).

BillC54]]> BillC54 Philippines RepRap User Group Sun, 05 Jun 2011 05:44:36 -0400