sloping back along Y-Axis ? I am 90% there... prints are starting to become smoother but the Y-Axis is sloping back along with each layer. I've attached an image of a calibration cube I just printed. I believe I need to adjust the Y-Axis to compensate for this drifting backwards. X-Axis is great and my steps along the Z-axis height are fine too. so what's the best way to adjust this Y-axis problem... in the calibration.h file or is there a physical adjustment I can make to the printer itself I'm on a Prusa i3. CalibrationCube Image https://reprap.org/forum/read.php?262,235354,235354#msg-235354 Sun, 15 Mar 2026 07:12:18 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?262,235354,239523#msg-239523 Re: sloping back along Y-Axis ? https://reprap.org/forum/read.php?262,235354,239523#msg-239523 Mickman Printing Sun, 25 Aug 2013 09:10:11 -0400 https://reprap.org/forum/read.php?262,235354,239307#msg-239307 Re: sloping back along Y-Axis ? https://reprap.org/forum/read.php?262,235354,239307#msg-239307 Masnachu Printing Sat, 24 Aug 2013 17:09:11 -0400 https://reprap.org/forum/read.php?262,235354,239064#msg-239064 Re: sloping back along Y-Axis ? https://reprap.org/forum/read.php?262,235354,239064#msg-239064 www.reprap.org]
with a list of the usual suspects.]]> rrr7 Printing Fri, 23 Aug 2013 23:13:46 -0400 https://reprap.org/forum/read.php?262,235354,237453#msg-237453 Re: sloping back along Y-Axis ? https://reprap.org/forum/read.php?262,235354,237453#msg-237453 reprap.org]]]> Filip Printing Sun, 18 Aug 2013 22:16:12 -0400 https://reprap.org/forum/read.php?262,235354,235453#msg-235453 Re: sloping back along Y-Axis ? https://reprap.org/forum/read.php?262,235354,235453#msg-235453 Dale Dunn Printing Tue, 13 Aug 2013 16:12:35 -0400 https://reprap.org/forum/read.php?262,235354,235354#msg-235354 sloping back along Y-Axis ? https://reprap.org/forum/read.php?262,235354,235354#msg-235354
I've attached an image of a calibration cube I just printed.

I believe I need to adjust the Y-Axis to compensate for this drifting backwards. X-Axis is great and my steps along the Z-axis height are fine too.

so what's the best way to adjust this Y-axis problem... in the calibration.h file or is there a physical adjustment I can make to the printer itself
I'm on a Prusa i3.

CalibrationCube Image]]> Mickman Printing Tue, 13 Aug 2013 08:24:31 -0400