My heated bed started separating (maybe due to overtightening of the 4 screws I have). My model is the Prusa i2. There is maybe about 1 millimeter of lift on the middles of the print bed in the middle of each side. For right now, I can only print on the lower coordinates (x:0-60mm)(y:0-60mm) without having adhesion issues due to the hotend ramming into the previous layer on one corner. Is there a way to winch the layers back together? I have glass on top, but I fear that the binder clips fastening it are slightly bending the glass plate. https://reprap.org/forum/read.php?262,320891,320891#msg-320891 Tue, 19 May 2026 06:12:18 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?262,320891,320923#msg-320923 https://reprap.org/forum/read.php?262,320891,320923#msg-320923
Your best option would be to pick up a new heated bed from a reputable supplier if you can afford it. Don't get just get the cheapest one you can find on eBay, they can be really hit-and-miss as to quality, and in some cases won't work at all without modification.]]> NewPerfection Printing Thu, 06 Mar 2014 17:37:10 -0500 https://reprap.org/forum/read.php?262,320891,320891#msg-320891 https://reprap.org/forum/read.php?262,320891,320891#msg-320891 hhbhagat Printing Thu, 06 Mar 2014 16:51:13 -0500