Bonding between PLA and ABS Hey Yesterday it made a print with PLA as support material for ABS. It's just a test to setup my support settings i KISSlicer, before i start to use my PVA support material for PLA. But to my surprise the PLA and ABS did not bond that well and I could break the support (PLA) of in one piece leaving no sign of PLA on the ABS part. (Black PLA on White ABS) Anyone else that have played with PLA and ABS together? Any tips for temperature, speed or other things to make ABS/PLA an easy to use support material? Thanks Jesper https://reprap.org/forum/read.php?262,330648,330648#msg-330648 Sun, 16 Aug 2026 21:56:40 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?262,330648,330669#msg-330669 Re: Bonding between PLA and ABS https://reprap.org/forum/read.php?262,330648,330669#msg-330669 www.thingiverse.com] printed upside down.
I don't want to print support as 100% fill / normal object, but as support and support interface that KISSlicer make.]]> Kenzu Printing Thu, 27 Mar 2014 05:08:59 -0400 https://reprap.org/forum/read.php?262,330648,330662#msg-330662 Re: Bonding between PLA and ABS https://reprap.org/forum/read.php?262,330648,330662#msg-330662 thejollygrimreaper Printing Thu, 27 Mar 2014 04:49:31 -0400 https://reprap.org/forum/read.php?262,330648,330659#msg-330659 Re: Bonding between PLA and ABS https://reprap.org/forum/read.php?262,330648,330659#msg-330659
Any good stl model for testing?]]> Kenzu Printing Thu, 27 Mar 2014 04:41:23 -0400 https://reprap.org/forum/read.php?262,330648,330657#msg-330657 Re: Bonding between PLA and ABS https://reprap.org/forum/read.php?262,330648,330657#msg-330657
Quote
Kenzu
Hey

Yesterday it made a print with PLA as support material for ABS. It's just a test to setup my support settings i KISSlicer, before i start to use my PVA support material for PLA.
But to my surprise the PLA and ABS did not bond that well and I could break the support (PLA) of in one piece leaving no sign of PLA on the ABS part. (Black PLA on White ABS)
Anyone else that have played with PLA and ABS together?
Any tips for temperature, speed or other things to make ABS/PLA an easy to use support material?

Thanks

Jesper

i was wondering how well it would work out using a big thin pla square as a raft for an abs print, have you got any photos?]]> thejollygrimreaper Printing Thu, 27 Mar 2014 04:32:41 -0400 https://reprap.org/forum/read.php?262,330648,330648#msg-330648 Bonding between PLA and ABS https://reprap.org/forum/read.php?262,330648,330648#msg-330648
Yesterday it made a print with PLA as support material for ABS. It's just a test to setup my support settings i KISSlicer, before i start to use my PVA support material for PLA.
But to my surprise the PLA and ABS did not bond that well and I could break the support (PLA) of in one piece leaving no sign of PLA on the ABS part. (Black PLA on White ABS)
Anyone else that have played with PLA and ABS together?
Any tips for temperature, speed or other things to make ABS/PLA an easy to use support material?

Thanks

Jesper]]> Kenzu Printing Thu, 27 Mar 2014 03:57:30 -0400