Overhang issues Hi All, I've just installed a print fan to the hotend but overhang issues has not improved. Please can someone advice me what I to do to improve the prints. My printer is Prusa Mendel i3 Print layer = 0.1 PLA Temp = 190C Heatbed = 70C Print environment temp = 28C Software = Slic3r [attachment 33181 IssueAA.jpg] [attachment 33182 AA.jpg][attachment 33183 AB.jpg] [attachment 33184 AC.jpg][attachment 33185 AD.jpg] [attachment 33186 AE.jpg][attachment 33187 AF.jpg] [attachment 33188 AG.jpg][attachment 33189 AH.jpg] https://reprap.org/forum/read.php?262,357647,357647#msg-357647 Mon, 07 Sep 2026 11:16:53 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?262,357647,366000#msg-366000 Re: Overhang issues https://reprap.org/forum/read.php?262,357647,366000#msg-366000 MrDoctorDIV Printing Fri, 06 Jun 2014 08:14:52 -0400 https://reprap.org/forum/read.php?262,357647,365877#msg-365877 Re: Overhang issues https://reprap.org/forum/read.php?262,357647,365877#msg-365877
Just in general:
I see there are also bits of plastic at the start and stopping points. There's a print you can use to easily tell how well your retratction is: [www.youmagine.com] It's quiet good because it becomes very obvious if it's working well or not.
You'll want that print to come out nicely.

Next there is temperature. You can change temperature in mid print. Sometimes 3 degrees difference can make quiet a difference.
But I'm fairly sure your prints will improve by setting infill to every 1 layer.]]> TheTechnicalNoob Printing Fri, 06 Jun 2014 00:46:59 -0400 https://reprap.org/forum/read.php?262,357647,357647#msg-357647 Overhang issues https://reprap.org/forum/read.php?262,357647,357647#msg-357647
I've just installed a print fan to the hotend but overhang issues has not improved.

Please can someone advice me what I to do to improve the prints.

My printer is Prusa Mendel i3
Print layer = 0.1
PLA Temp = 190C
Heatbed = 70C
Print environment temp = 28C
Software = Slic3r


[attachment 33181 IssueAA.jpg]

[attachment 33182 AA.jpg][attachment 33183 AB.jpg]

[attachment 33184 AC.jpg][attachment 33185 AD.jpg]

[attachment 33186 AE.jpg][attachment 33187 AF.jpg]

[attachment 33188 AG.jpg][attachment 33189 AH.jpg]]]> duckfriedrice Printing Tue, 20 May 2014 00:13:21 -0400