Should I lower acceleration, speed or what? 230C Hotend & 110C Bed. The hollow calibration cube prints more nicely compared to these gears. https://reprap.org/forum/read.php?262,425004,425004#msg-425004 Mon, 15 Jun 2026 06:36:29 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?262,425004,425405#msg-425405 https://reprap.org/forum/read.php?262,425004,425405#msg-425405 ggherbaz Printing Tue, 28 Oct 2014 13:54:21 -0400 https://reprap.org/forum/read.php?262,425004,425361#msg-425361 https://reprap.org/forum/read.php?262,425004,425361#msg-425361
I lowered temperature to 225. I did not try to print 4 at once, yet, but here are the other setting that I made in Slic3r:

Avoid crossing perimeters true.

; generated by Slic3r 1.0.0RC2 on 2014-10-28 at 15:48:09
; layer_height = 0.25
; perimeters = 3
; top_solid_layers = 3
; bottom_solid_layers = 3
; fill_density = 0.4
; perimeter_speed = 30
; infill_speed = 40
; travel_speed = 130
; nozzle_diameter = 0.4
; filament_diameter = 3
; extrusion_multiplier = 1
; perimeters extrusion width = 0.40mm
; infill extrusion width = 0.40mm
; solid infill extrusion width = 0.40mm
; top infill extrusion width = 0.40mm
; first layer extrusion width = 0.40mm]]> Plasteroid Printing Tue, 28 Oct 2014 12:00:42 -0400 https://reprap.org/forum/read.php?262,425004,425307#msg-425307 https://reprap.org/forum/read.php?262,425004,425307#msg-425307 Floyd Printing Tue, 28 Oct 2014 09:08:25 -0400 https://reprap.org/forum/read.php?262,425004,425247#msg-425247 https://reprap.org/forum/read.php?262,425004,425247#msg-425247 Mickoz Printing Tue, 28 Oct 2014 06:34:16 -0400 https://reprap.org/forum/read.php?262,425004,425065#msg-425065 https://reprap.org/forum/read.php?262,425004,425065#msg-425065 ggherbaz Printing Mon, 27 Oct 2014 16:26:13 -0400 https://reprap.org/forum/read.php?262,425004,425063#msg-425063 https://reprap.org/forum/read.php?262,425004,425063#msg-425063 Temperature
Infill to perimeter overlap
Extrusion width]]> ggherbaz Printing Mon, 27 Oct 2014 16:23:57 -0400 https://reprap.org/forum/read.php?262,425004,425004#msg-425004 https://reprap.org/forum/read.php?262,425004,425004#msg-425004 Plasteroid Printing Mon, 27 Oct 2014 13:47:27 -0400