I got the error "extruder 0:temp sensor defect" in pronterface. All of the axis move well, the fan works, the bed read the ambient temperature, but the extruder read at something like 393 C when off which is obviously not true. From what I've read the thermocouple may have and open circuit or be damaged I guess. Do you have any idea what may be causing the incorrect temperature to be read? I had a hard time getting the drivers to install due to inaccurate instructions. I wonder if a software issue or setting may be causing the sensor to not read. Any help is appreciated. I'm starting to consider buying another printer at this point but I would like to get this one working even if I do. https://reprap.org/forum/read.php?262,557429,557429#msg-557429 Sun, 14 Jun 2026 06:39:27 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?262,557429,557795#msg-557795 https://reprap.org/forum/read.php?262,557429,557795#msg-557795 Allnight Printing Sun, 13 Sep 2015 13:58:15 -0400 https://reprap.org/forum/read.php?262,557429,557616#msg-557616 https://reprap.org/forum/read.php?262,557429,557616#msg-557616 A) wrong thermistor settings in the firmaware
B) faulty wiring or thermistor]]> Downunder35m Printing Sun, 13 Sep 2015 05:28:57 -0400 https://reprap.org/forum/read.php?262,557429,557429#msg-557429 https://reprap.org/forum/read.php?262,557429,557429#msg-557429 Allnight Printing Sat, 12 Sep 2015 15:06:43 -0400