Hi all. The most expensive dragon I ever print. It's only 80mm height. cost: $32 Peek: 1.75mm layer height: 150 micron speed: 20mm/s infilled: 40% nozzle: 0.4 heat: 395C Bed: 140C chamber: 70C p.s. Have you guys try dragon before, what is the lowest layer height 200micron or 100micron or 50micron...etc.... https://reprap.org/forum/read.php?262,848908,848908#msg-848908 Mon, 20 Apr 2026 15:34:42 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?262,848908,848919#msg-848919 https://reprap.org/forum/read.php?262,848908,848919#msg-848919 Shank man Printing Mon, 11 Mar 2019 06:25:39 -0400 https://reprap.org/forum/read.php?262,848908,848908#msg-848908 https://reprap.org/forum/read.php?262,848908,848908#msg-848908
The most expensive dragon I ever print. It's only 80mm height. cost: $32

Peek: 1.75mm

layer height: 150 micron
speed: 20mm/s
infilled: 40%
nozzle: 0.4
heat: 395C
Bed: 140C
chamber: 70C


p.s. Have you guys try dragon before, what is the lowest layer height 200micron or 100micron or 50micron...etc....]]> lesean Printing Sun, 10 Mar 2019 19:44:44 -0400