I use Slic3r since a week and I am impressed with the prints! Now I have some problems that I need your help. All my prints are larger than in SF(Skeinforge). Outer edges are 0.5 mm thick and the diameter is smaller up to 1mm at 8mm! extgearLspring: [www.thingiverse.com] Problem: Outer diameter is 0,5mm langer und diameter 0,8mm smaller, filament strings in the gear gaps! Hollow_Pyramid_short: [www.thingiverse.com] Problem: langer then in Skeinforge und filament strings Testprint: same problem How can I improve my prints? Hint: stl files are fixed (cloud.netfabb.com) https://reprap.org/forum/read.php?263,109692,109692#msg-109692 Tue, 10 Mar 2026 18:47:00 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?263,109692,113376#msg-113376 https://reprap.org/forum/read.php?263,109692,113376#msg-113376 I don't agree with calibration. E-steps in FW are well calibrated and will checked frequently.
It will extruded 50mm filament when I extrude 50mm!
I agree with overextruding in slic3r and underextruding in Skeinforge fot the parts on the pictures.
But now I have about the same amount (filament) for the same parts.
Be sure, I have printed amount of single-wall parts to get the best settings for me at
Skeinforge. I have used your SFACT for short time and fallowed of course the calibration instruction and changed again without a reason to SF. I should give your SFACT a chance next time:).
Anyway i am looking forward to the next version of slic3r with fixed some known issues..]]> dogi Slic3r Wed, 11 Jan 2012 17:22:03 -0500 https://reprap.org/forum/read.php?263,109692,113171#msg-113171 https://reprap.org/forum/read.php?263,109692,113171#msg-113171 sadly your calibration seems off.
You are overextruding in slic3r and underextruding in SF.
Slic3r defaults should give you perfect prints, the reason you seem to get bigger parts is that actually you could have msicalibrated E-steps in FW.
In SF you get too few plastic most probably because you are overcompensating with the settings.
The prints you are getting in SF have too few plastic. The infill doesnt touch the perimeter and perimeter lines barely touch each other where they should have a healthy overlap.
You could load SFACT and try the calibration steps with the single wall object. If you get a value quite off 1 (more than +-0.3) You should recalibrate E-steps.)

If you think that a third Slicer in house is a bad idea You still can try to print the single wall calibration piece. and measure the thickness that comes out. It should have the correct width you had specified in SF.]]> ahmetcemturan Slic3r Tue, 10 Jan 2012 17:07:57 -0500 https://reprap.org/forum/read.php?263,109692,113162#msg-113162 https://reprap.org/forum/read.php?263,109692,113162#msg-113162 Sound Slic3r Tue, 10 Jan 2012 16:16:58 -0500 https://reprap.org/forum/read.php?263,109692,113152#msg-113152 https://reprap.org/forum/read.php?263,109692,113152#msg-113152
I menaged to get ok settings with the BfB Axon tool for my prints, but I'm not quite satisfied with the result so I wanted to try your program.

/Henrik]]> Henrik Slic3r Tue, 10 Jan 2012 15:24:59 -0500 https://reprap.org/forum/read.php?263,109692,109785#msg-109785 https://reprap.org/forum/read.php?263,109692,109785#msg-109785 maybe I overlooked the bug! Then I will download the github version and curious to the new prints und looking forward to the new version.
Until the next problem]]> dogi Slic3r Mon, 12 Dec 2011 14:43:06 -0500 https://reprap.org/forum/read.php?263,109692,109774#msg-109774 https://reprap.org/forum/read.php?263,109692,109774#msg-109774 Sound Slic3r Mon, 12 Dec 2011 13:10:49 -0500 https://reprap.org/forum/read.php?263,109692,109692#msg-109692 https://reprap.org/forum/read.php?263,109692,109692#msg-109692 Now I have some problems that I need your help.
All my prints are larger than in SF(Skeinforge). Outer edges are 0.5 mm thick and the diameter is smaller up to 1mm at 8mm!

extgearLspring: [www.thingiverse.com]
Problem: Outer diameter is 0,5mm langer und diameter 0,8mm smaller, filament strings in the gear gaps!
Hollow_Pyramid_short: [www.thingiverse.com]
Problem: langer then in Skeinforge und filament strings
Testprint: same problem

How can I improve my prints?
Hint: stl files are fixed (cloud.netfabb.com)]]> dogi Slic3r Sun, 11 Dec 2011 15:08:43 -0500