Slic3r... Out of Control bug list, time to get a clue... [u][b]So here's my little copy and paste rant on using a competent slicer..[/b].[/u] Have a quick glance at the Slic3r Forum... http://forums.reprap.org/list.php?263 Nothing more than a extensive bug list that goes on forever and grows with every new release of Slic3r. I used to read this Slic3r blog daily, then I got a clue... You can't circumvent crappy slicing software by manipulating your slicer profiles, modifying your firmware or blaming your machine. FYI... NOT sure why anybody is still using Slic3R beyond v7.02b (v7.02b is a great simple and competent slicer). I sadly laugh when I see people trying to fix problems with this continual problematic slicer >Slic3R v7.02b. I finally gave up after Slic3R v9.8; recouped my life, and no more wasted time and plastic, and moved forward away from Slic3R. Also glad to be done with random artifacts/bumps/blobs/warts/overhangs scattered about my prints, yesh... enough is enough ! You can easily spot a user that is using Slic3r by viewing their unwanted identifying extras added to one's print. Typically garbage output from Slic3r. Every new Slic3R upgrade version has a new set of unresolved problems. I tried EVERY Slic3R version v7.02b - v9.8 extensively and utilized every smart so called fix for the problems... result garbage can full of melted plastic, hundred of frustrating hours endured/wasted, and saw my life passing me by. I'M DONE, DONE, DONE and DONE with Slic3R !!! I used Skeinforge v41-v50 as my primary slicer for the last 2 years, but it has an internal memory limit which restricts you from printing more than simple trinkets and objects. Using KISSlicer... I found new capabilities and no limitations... Finally I can do what my intentions were when I bought my printer, to print close tolerance high quality functional engineering prototypes. Since using KISSlicer over the last year... I can now print very complex and close tolerance engineering prototypes (0.1mm Layer Height @ +- 0.05mm tolerance for all dimensional shapes; except slightly undersized hole I.D.s) all day long everyday using KISSlicer, IMO it is the best slicer solution out there. NO more Slic3r wasting my time and memory limitations using Skeinforge, I have my life back now and time to do other things other than melt plastic in to useless shapes and fill the garbage can. Note : KISSlicer is seemingly and sadly going defunct it appears, and is no longer maintained by it's creator/owner, but is still the best overall slicer ATM. Download from here: www.kisslicer.com Information here: - Kisslicer Refugee Camp - Google Groups [groups.google.com] _____________________ [b]IMHO I think Slic3r developers, at this time need to put a halt to Slic3r as it is known[/b], take what they have learned and create a ground-up new version, and stop patching/upgrading the garbage. Personally I think they try to fix a bug, and then create 10 more bugs from the bug they fixed. I appreciate their endeavors, but the world does not need another Microsoft Vista. [b]Stop Chasing Your Tail Around... ditch Slic3r... an Your Problems should be all be history now[/b]. :)-D https://reprap.org/forum/read.php?263,314073,314073#msg-314073 Sat, 15 Aug 2026 06:51:24 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?263,314073,399821#msg-399821 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,399821#msg-399821 users not customers.

Dave]]> dmould Slic3r Wed, 27 Aug 2014 11:16:29 -0400 https://reprap.org/forum/read.php?263,314073,399506#msg-399506 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,399506#msg-399506 1. It was shipped with my 3d printer and there was a good beginner's guide to most important settings.
2. It works for me. I've encountered only one two real bugs so far. That is a low bug density I'd say. I did get quite a number of ruined prints, but not a single one was caused by Slic3r itsef (they were caused by my incompetence, not adequate print settings or hardware fault - I'm still a 3d printing beginner, I have only had a 3d printer for two months).
3. It is the only one among those supplied with Repetier-Host which is able to expose infill in custom areas of a model. See topic [forums.reprap.org] . I have made 4 objects with such features so far (three speaker cabinets and one filter for liquids).
4. It is highly configurable, yet its settings are easy to understand (for me at least). I have had a hard time when trying Skeinforge, I almost had to look up documentation for every setting. Didn't get a single slice out of it yet. BTW, I couldn't get a successful slice out of Cura either (from within Repetier-Host. I always get G-code with zero extrusion... I'll return to that some time later maybe).

Thanks for pointing out KISSlicer. I did know it exists, but Keep It Simple Slicer is not what I want. I did not find enough feature highlights on its website when I was about to try, so turned around. I'll take another look at it when Slic3r would fail to do what I need.

PS. I don't print toys. That's not what I've bought a 3d-printer for! I'm an electronics hobbyist, I love making something new!]]> DeepSOIC Slic3r Tue, 26 Aug 2014 20:14:21 -0400 https://reprap.org/forum/read.php?263,314073,398536#msg-398536 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,398536#msg-398536
Unbelievable... as the clueless beat of an unusable slicer continues.
Sorry to see all of you still wasting your time, life and plastic.

FYI... KISSLICER is alive and well, and currently under development. BEST slicer available.

Hope my experience helps you... enjoy Happy Printing !:)-D

Shawn
__________________________________________________________________________________________________________________

25+ Years Experience as a Manufacturing Engineer and New Product Developer
Three Years Experience... Printing 6-8 hours a day, 5 days a week, complex and close tolerance functional engineering prototypes.
Printing PLA @0.1mm Layer Height with +- 0.05mm tolerance for all dimensional shapes (except slightly undersized hole I.D.s).
No printing of... toys, trinkets, low quality prints, or other useless printed objects.
]]> ShawnT98027 Slic3r Sun, 24 Aug 2014 11:26:10 -0400 https://reprap.org/forum/read.php?263,314073,362194#msg-362194 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,362194#msg-362194 MrDoctorDIV Slic3r Thu, 29 May 2014 13:26:47 -0400 https://reprap.org/forum/read.php?263,314073,347222#msg-347222 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,347222#msg-347222 If you want to help, just help. Otherwise, please enjoy your life somewhere else.]]> Sound Slic3r Tue, 29 Apr 2014 08:48:42 -0400 https://reprap.org/forum/read.php?263,314073,346716#msg-346716 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,346716#msg-346716 Just stopped by for a visit... and I see nothing has changed with Slic3r... BUGS, Bugs, bugs and MORE BUGS !
Have a quick glance at the Slic3r Forum... OUT OF CONTROL BUG LIST

Slic3r... Out of Control bug list, time to get a clue...
Same buggy-as software, same typical posters chasing their tails around, looking for workarounds, producing sub-par prints and wasting their life away printing with bug riddled software.
_________________________

Just a note the BEST Slicer available at this time is KISSlicer... and is now again being developed by it's creator Jonathan Lonestock after a one year hiatus.
Download KISSLICER

Information here:
Kisslicer Refugee Camp - Google Groups
_________________________

So no more excuses for using garbage bug riddled software and producing sub-par prints.
Stop Chasing Your Tail Around... ditch Slic3r... an Your Problems should be all be history now.

Hope my experience helps you... enjoy Happy Printing !:)-D

Shawn
__________________________________________________________________________________________________________________

25+ Years Experience as a Manufacturing Engineer and New Product Developer
Three Years Experience... Printing 6-8 hours a day, 5 days a week, complex and close tolerance functional engineering prototypes.
Printing PLA @0.1mm Layer Height with +- 0.05mm tolerance for all dimensional shapes (except slightly undersized hole I.D.s).
No printing of... toys, trinkets, low quality prints, or other useless printed objects.
]]> ShawnT98027 Slic3r Mon, 28 Apr 2014 12:50:05 -0400 https://reprap.org/forum/read.php?263,314073,329594#msg-329594 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,329594#msg-329594
Quote
Kenzu
Quote
tmorris9
Kenzu, my question to you is does simply3d make proper hole sizes? This is a major (in my opinion) problem with other slicers.

As far as cost, I would pay $140 for a proper slicer that does everything right.


Many people here though build there own printers on tight budgets and may only have a few hundred dollars invested, I can see why they would balk at that price that's half the cost of what they spent on the printer. Myself, I bought a pre made (in someones home) printer for $1,700 and it's worth every penny 'to me'.

Sadly no. It had an arc feature in one of the early version, that did make really close to proper hole sizes. But that got removed in the last to version. Don't know why. :-(

Funny, I had sent the question to simply3d and they finally got back to me. They told me about the prior version and also said the option was removed, here is their explanation why:

"These things were both options from the previous version 1.1.5 software. I believe the developers actually removed these options from the latest version 2 software, as many firmwares still do not support G2/G3 commands, and most of our users were getting very good dimensional tolerance for their holes, even without the extra compensation. "]]> tmorris9 Slic3r Mon, 24 Mar 2014 17:34:30 -0400 https://reprap.org/forum/read.php?263,314073,329219#msg-329219 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,329219#msg-329219
Quote
tmorris9
Kenzu, my question to you is does simply3d make proper hole sizes? This is a major (in my opinion) problem with other slicers.

As far as cost, I would pay $140 for a proper slicer that does everything right.


Many people here though build there own printers on tight budgets and may only have a few hundred dollars invested, I can see why they would balk at that price that's half the cost of what they spent on the printer. Myself, I bought a pre made (in someones home) printer for $1,700 and it's worth every penny 'to me'.

Sadly no. It had an arc feature in one of the early version, that did make really close to proper hole sizes. But that got removed in the last to version. Don't know why. :-(]]> Kenzu Slic3r Mon, 24 Mar 2014 04:27:49 -0400 https://reprap.org/forum/read.php?263,314073,328236#msg-328236 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,328236#msg-328236
As far as cost, I would pay $140 for a proper slicer that does everything right.


Many people here though build there own printers on tight budgets and may only have a few hundred dollars invested, I can see why they would balk at that price that's half the cost of what they spent on the printer. Myself, I bought a pre made (in someones home) printer for $1,700 and it's worth every penny 'to me'.]]> tmorris9 Slic3r Fri, 21 Mar 2014 19:25:00 -0400 https://reprap.org/forum/read.php?263,314073,328017#msg-328017 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,328017#msg-328017
Quote
dissidence
Quote
Kenzu
I use Simplify3D as my main slicer. It miss some small things, but overall it's alot better than Slic3r and Cura.
It's another workflow, but you can put many processes on the same part. Ex. Slice with 0.35 layers for the first 5mm, and the 0.1mm for the last.
It all so handle multi extruder very nice. You can all so setup manual support.

I only miss Honeycomb infill from KISSlicer
Combing AKA "Avoid Crossing Perimeters"
And separate filament profiles. Machine and filament profiles are the same now.

Jesper

i took a look at that site for simplify3d, yes the software dose look good, but at 150/license i have better uses for my money, thats most of a new printer.

but yes i would very much like to see more work done on slic3r, between it and cura, i am covered. i will donate some money his way with his next update i think, but like so much in the reprap world i wish there was a way to pay people to develop for it more actively, but that the opensource problem.

Why pay 1000$ for at 3D printer / Hardware if the software you use makes your printer behave like a 300$ printer?

edit: For me, the software is just a big a part of my 3D print's as my 3D printer.]]> Kenzu Slic3r Fri, 21 Mar 2014 09:49:54 -0400 https://reprap.org/forum/read.php?263,314073,327983#msg-327983 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,327983#msg-327983 CaptainObvious Slic3r Fri, 21 Mar 2014 07:27:28 -0400 https://reprap.org/forum/read.php?263,314073,327943#msg-327943 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,327943#msg-327943
Quote
Kenzu
I use Simplify3D as my main slicer. It miss some small things, but overall it's alot better than Slic3r and Cura.
It's another workflow, but you can put many processes on the same part. Ex. Slice with 0.35 layers for the first 5mm, and the 0.1mm for the last.
It all so handle multi extruder very nice. You can all so setup manual support.

I only miss Honeycomb infill from KISSlicer
Combing AKA "Avoid Crossing Perimeters"
And separate filament profiles. Machine and filament profiles are the same now.

Jesper

i took a look at that site for simplify3d, yes the software dose look good, but at 150/license i have better uses for my money, thats most of a new printer.

but yes i would very much like to see more work done on slic3r, between it and cura, i am covered. i will donate some money his way with his next update i think, but like so much in the reprap world i wish there was a way to pay people to develop for it more actively, but that the opensource problem.]]> dissidence Slic3r Fri, 21 Mar 2014 05:30:30 -0400 https://reprap.org/forum/read.php?263,314073,327917#msg-327917 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,327917#msg-327917 It's another workflow, but you can put many processes on the same part. Ex. Slice with 0.35 layers for the first 5mm, and the 0.1mm for the last.
It all so handle multi extruder very nice. You can all so setup manual support.

I only miss Honeycomb infill from KISSlicer
Combing AKA "Avoid Crossing Perimeters"
And separate filament profiles. Machine and filament profiles are the same now.

Jesper]]> Kenzu Slic3r Fri, 21 Mar 2014 03:57:16 -0400 https://reprap.org/forum/read.php?263,314073,327747#msg-327747 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,327747#msg-327747
Please don't say Kisslicer or Skeinforge as they are both dead end products with no future. As firmware advances and features are added to printers these slicers will cease to work properly. Cura is an option but has as many problems as Slic3r and fewer features. So there must be another slicer out there I am unaware of, please tell me what it is so I can ditch Slic3r.]]> tmorris9 Slic3r Thu, 20 Mar 2014 16:03:18 -0400 https://reprap.org/forum/read.php?263,314073,327187#msg-327187 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,327187#msg-327187
Quote
forum rules
In order to maintain a positive atmosphere, no personal attacks or insults will be tolerated. While discussions may become heated, it is not an excuse to resort to attacks or insults. Moderators and or Admins will remove and warn users at their discretion.

I haven't seen anything out of the ordinary in this thread... yet. Just a reminder to play friendly. :)]]> MattMoses Slic3r Wed, 19 Mar 2014 11:39:49 -0400 https://reprap.org/forum/read.php?263,314073,326692#msg-326692 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,326692#msg-326692 Hello Waitaki,

You can speak to me directly (and not around me).

BTW... Quantity of posts does not equal quality of content, nor is an indicator of any knowledge beyond keyboard usage.

My 25+ years as indicated in my signature is accurate, I am proud of it, and won't deny my experience and expertise for any serial blogger or thread poster, or lesser educated or experienced individual.

Three things... that is my purpose as a contributor.
  • To help one person a day actually fix their printer/prints (rather than like a lot of posters with less knowledge and understanding; that lead the unknowingly around to chase their tail around forever; screw-up their printer further, never fix the problem, and becoming just another serial blogger/poster).
  • To steer just one person a day away from Slic3r, and free up there time/life, as so they can spend more time printing successfully, and more time with their family, children, wife, girl friend, friends etc. I shorted the people that are important to me, over the last 2-3 years of my time and being there for them, because I always had to try one more tweak or work-around in Slic3r.
  • Give the unknowingly a clue... that you can't circumvent crappy slicing software by manipulating your slicer profiles, modifying your firmware or blaming your machine.
That is my goal, plain and simple.

Being in the field of Manufacturing Engineering and New Product Development all of my adult life, since the mid 90's, I have seen the demise of engineering schools/universities that actually educate their students, teach in-depth real world knowledge, real world skills, and real world understanding. But of course, even if one does get lucky enough to attend a great engineering school, you just can't teach common sense and logical thinking.

Sorry that you are offended by people of real world experience.

For All, hope my experience helps you... enjoy Happy Printing !:)-D

Shawn
__________________________________________________________________________________________________________________

25+ Years Experience as a Manufacturing Engineer and New Product Developer
Three Years Experience... Printing 6-8 hours a day, 5 days a week, complex and close tolerance functional engineering prototypes.
Printing PLA @0.1mm Layer Height with +- 0.05mm tolerance for all dimensional shapes (except slightly undersized hole I.D.s).
No printing of... toys, trinkets, low quality prints, or other useless printed objects.
]]> ShawnT98027 Slic3r Tue, 18 Mar 2014 11:54:04 -0400 https://reprap.org/forum/read.php?263,314073,326501#msg-326501 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,326501#msg-326501 waitaki Slic3r Tue, 18 Mar 2014 04:16:44 -0400 https://reprap.org/forum/read.php?263,314073,326062#msg-326062 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,326062#msg-326062
Paucus]]> paucus Slic3r Mon, 17 Mar 2014 09:10:18 -0400 https://reprap.org/forum/read.php?263,314073,325723#msg-325723 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,325723#msg-325723 jbernardis Slic3r Sun, 16 Mar 2014 13:35:38 -0400 https://reprap.org/forum/read.php?263,314073,325706#msg-325706 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,325706#msg-325706 Paucus...

Nothing to do with any "file"... just poorly written software, why don't you get a clue.
Can't circumvent crappy slicing software... by posting a file for the clueless to comment on.

Why are you using Slic3r?... support your position with an intelligent set of reasons.

Shawn
__________________________________________________________________________________________________________________

25+ Years Experience as a Manufacturing Engineer and New Product Developer
Three Years Experience... Printing 6-8 hours a day, 5 days a week, complex and close tolerance functional engineering prototypes.
Printing PLA @0.1mm Layer Height with +- 0.05mm tolerance for all dimensional shapes (except slightly undersized hole I.D.s).
No printing of... toys, trinkets, low quality prints, or other useless printed objects.
]]> ShawnT98027 Slic3r Sun, 16 Mar 2014 12:25:26 -0400 https://reprap.org/forum/read.php?263,314073,325689#msg-325689 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,325689#msg-325689
Paucus]]> paucus Slic3r Sun, 16 Mar 2014 11:19:19 -0400 https://reprap.org/forum/read.php?263,314073,316469#msg-316469 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,316469#msg-316469
So it looks like the same ol' thing...

1.0.RCx versions continue the Slic3r legacy of MASSIVE BUGS, and producing sub-standard and often unusable prints.
______

When should one get a clue ?...
And move on to a better slicer, print quality objects, stop the endless blogging/threads about buggy-as software and most of all recoup your life.

As an end user (as most of us are)...
I don't get it, why are you continuing to use Slic3r, as you can't fix or circumvent screwed-up code within the software ...
Maybe your stuck or afraid to try/learn a better slicer like KISSlicer, Cura or even Skeinforge or get your life back ?

Just curious... Why are you still using or stuck on Slic3r ?]]> ShawnT98027 Slic3r Wed, 26 Feb 2014 11:42:29 -0500 https://reprap.org/forum/read.php?263,314073,315119#msg-315119 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,315119#msg-315119 jameson Slic3r Sun, 23 Feb 2014 18:39:20 -0500 https://reprap.org/forum/read.php?263,314073,314786#msg-314786 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,314786#msg-314786 jkoljo Slic3r Sun, 23 Feb 2014 05:58:58 -0500 https://reprap.org/forum/read.php?263,314073,314500#msg-314500 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,314500#msg-314500
Quote
ShawnT98027

IMHO I think Slic3r developers, at this time need to put a halt to Slic3r as it is known, take what they have learned and create a ground-up new version, and stop patching/upgrading the garbage. Personally I think they try to fix a bug, and then create 10 more bugs from the bug they fixed. I appreciate their endeavors, but the world does not need another Microsoft Vista.

[/b]. :)-D

Garbage????
You are always free to use the code and create something better - I mean it is open source.]]> Xabbax Slic3r Sat, 22 Feb 2014 11:14:26 -0500 https://reprap.org/forum/read.php?263,314073,314362#msg-314362 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,314362#msg-314362 waitaki Slic3r Sat, 22 Feb 2014 04:51:59 -0500 https://reprap.org/forum/read.php?263,314073,314307#msg-314307 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,314307#msg-314307
Yes it is a shame that both the developers of Skeinforge and KISSlicer, have stopped development or just vanished off the face of the planet.

And your right, all the current slicers available all have their own pros and cons. With my extensive experience using Slic3r and Skeinforge, and in the last year KISSlicer, KISSlicer just has way less cons, and does everything better and smarter, but lacks a few convenient features such as multiple skirt loops, brim and bridge settings.

So yes, I keep hoping that someday Slic3r will get it all figured out (IMHO KISSlicer was way ahead of the curve on that), and hopefully Slic3r will stop releasing the garbage as they are wasting everybody's time and money (Slic3r maybe OK for printing low quality disposable toys & trinkets; but the bugs/headaches still aren't worth it for me).

Every month or so, I check out the blogs and forums regarding Slic3r hoping to see something positive from them (a semi-bug free/usable release), but its always just another bug filled version, it's just too ridiculous. I always liked the early simplicity with Slic3r over Skeinforge... but I need quality prints results.

So for now, all we can do, is wait, and hope they truly develop a more usable product.]]> ShawnT98027 Slic3r Sat, 22 Feb 2014 00:32:54 -0500 https://reprap.org/forum/read.php?263,314073,314305#msg-314305 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,314305#msg-314305
The fact remains slic3r is free of charge. Although I raise issues on the github site I don't feel I have the right to criticize software I haven't purchased. I understand the complexities of writing software; I'm just thankful these authors have provided these tools and hope they continue to do so. We've already seen two slicers - skeinforge and kisslicer - where it seems the authors have lost interest. I'm glad the slic3r team is continuing to develop the product.]]> jbernardis Slic3r Fri, 21 Feb 2014 23:59:17 -0500 https://reprap.org/forum/read.php?263,314073,314289#msg-314289 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,314289#msg-314289
Now, Slic3r has issues with hole sizes but it can be adjusted for. v0.9.10b is the most stable of it's breed and support is good. V1.0.Rx has better top infill (no gaps) but it's support SUX, you can never remove it cleanly and still hole size is an issue. So, I currently use V1.0 R2 (R3 was just released) when I don't need support, but if I need support I revert back to v 0.9.10b

I make a few dozen parts a week, sometimes many more. I don't have buckets of junk plastic, nor am I pulling my hair out or spending lots of extra time trying to fight the software. But then again, I am knowledgeable about how and why the software works, I can examine the Gcode if needed and my printer is of good quality. 99% of all my prints come out very good.]]> tmorris9 Slic3r Fri, 21 Feb 2014 22:01:00 -0500 https://reprap.org/forum/read.php?263,314073,314203#msg-314203 Re: Slic3r... Out of Control bug list, time to get a clue... https://reprap.org/forum/read.php?263,314073,314203#msg-314203
FYI... WTH are you talking about.

I also payed for it with hundred of hours of time, and hundreds of dollars worth of plastic.

My Family also payed for it, by my absence fiddling with the garbage.

Believe it, I PAYED for it big time, life lost and never to be replaced.

OBTW... Early on... I DID Pay for it (Slic3r) via PayPal donation.
[www.paypal.com]

Get a clue, and you may get your life back also, along with happy printing.:)-D]]> ShawnT98027 Slic3r Fri, 21 Feb 2014 16:57:49 -0500