any body can help plz :(:( Hi guys i have a 3d design on sketchup file that i attached and i want to convert it to STL file OR G-code file to print it by pronterface i try to convert the design by sketchup but still pronterface can not open it or it convert but in different shape can any body give the STL file Or G-code ( after converting) that make the design in horizontal shape to let me print it in plate the has square shape (15*15 cm) thx https://reprap.org/forum/read.php?263,413224,413224#msg-413224 Tue, 13 Oct 2026 09:15:43 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?263,413224,421897#msg-421897 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,421897#msg-421897 dmould Slic3r Mon, 20 Oct 2014 07:20:59 -0400 https://reprap.org/forum/read.php?263,413224,421721#msg-421721 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,421721#msg-421721 my dsl line was down for a week :( :(


i want to change the logo in left side of this pic
[forums.reprap.org]

to g code to print it in my printer (3d styffmaker) using sli3er]]> Omar991 Slic3r Sun, 19 Oct 2014 17:09:41 -0400 https://reprap.org/forum/read.php?263,413224,419251#msg-419251 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,419251#msg-419251 dmould Slic3r Tue, 14 Oct 2014 06:45:35 -0400 https://reprap.org/forum/read.php?263,413224,419006#msg-419006 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,419006#msg-419006 " class="bbcode" border="0" />
" class="bbcode" border="0" />

after i click ok i expoet the g code but i got the error massege

" class="bbcode" border="0" />

then i open prontorface and load your stl file i got this
" class="bbcode" border="0" />


fillaly i opened the g code that i got it from stl file ( with error) and i got this
" class="bbcode" border="0" />
]]> Omar991 Slic3r Mon, 13 Oct 2014 15:47:54 -0400 https://reprap.org/forum/read.php?263,413224,418674#msg-418674 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,418674#msg-418674
Seriously though, I still don't understand what it is you want. From your latest post I gather:

1. You want both models as shown above?
The one on the right will be very difficult to print even if it slices correctly - too many long bridges in whichever orientation (think molten plastic, the layers with which you are making the model and gravity) or the need for support, which will leave surface artefacts.
The one on the left will print if you separate it out and rotate it so that it sits flat on the bed - as shown in my earlier post.
In any case you should consider printing the two logos separately.

2. You want to "submit" this for some college project or something by TODAY?
Nothing like leaving it to the last minute, eh? What have you been doing in the past two weeks since I last offered to help? 8-)

Every file I uploaded in this thread has sliced fine on both OSX and Windows versions of Slic3r. If you cannot slice it then you need to describe the error in better detail.]]> QuackingPlums Slic3r Mon, 13 Oct 2014 04:36:23 -0400 https://reprap.org/forum/read.php?263,413224,418322#msg-418322 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,418322#msg-418322 i want 2 shape

to change it in stl files to print it

i download a stl file but still i has error in sli3cer




i should summit it tomorrow :(((
if any body can help or can give a site that can help me even if i pay to them money]]> Omar991 Slic3r Sun, 12 Oct 2014 09:29:43 -0400 https://reprap.org/forum/read.php?263,413224,413758#msg-413758 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,413758#msg-413758 [attachment 41271 ScreenShot2014-09-30at14.45.06.png]

Did you want the whole model or just the thing on the left? :S]]> QuackingPlums Slic3r Tue, 30 Sep 2014 09:53:33 -0400 https://reprap.org/forum/read.php?263,413224,413728#msg-413728 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,413728#msg-413728
I'm afraid that you will first have to bite the bullet and learn at least the basics of your 3D printer and how to use your CAD software. It is not difficult, but at present you are trying to run before you have learned to walk, and are unlikely to achieve what you want without some understanding of the process even if people help by performing the necessary changes for you. Read the manuals and practice with some simple designs first, it won't take that long to learn, and you have a lot of fun in the process! It also appears from reading other posts that the CAD software you are using may not be the best choice for making 3D printable models - there are several free applications available, why not try some and see what suits you best?

Dave]]> dmould Slic3r Tue, 30 Sep 2014 08:50:01 -0400 https://reprap.org/forum/read.php?263,413224,413661#msg-413661 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,413661#msg-413661
Quote
ThorsenRune
Omar, for sketchup I use stl4su.rb plugin. You will download it from [github.com]
Its very easy then to just export the sketchup to a stl file.

If you're using SketchupMake (if not, why not?) then there is a direct link to the Extension Warehouse from the Tools menu, from which you can install plugins directly without having to download ruby files from GitHub any more. There's an STL import/export pluging that was released by the Sketchup people themselves, which is what I used to create the STL above. Took less than a minute to get it installed and exported.]]> QuackingPlums Slic3r Tue, 30 Sep 2014 05:54:59 -0400 https://reprap.org/forum/read.php?263,413224,413654#msg-413654 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,413654#msg-413654 github.com]
Its very easy then to just export the sketchup to a stl file. You may also want to install a SolidSolver.rb plugin because SU is not very good for 3D design.
It took me quite some time to get started doing 3D printing. Let me know if you need more help.
I think youll have some fun trying to print your thing since its not one solid piece.]]> ThorsenRune Slic3r Tue, 30 Sep 2014 05:47:42 -0400 https://reprap.org/forum/read.php?263,413224,413601#msg-413601 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,413601#msg-413601
This is what this stl looks like if I load it into Repetier:
[attachment 41261 ScreenShot2014-09-30at08.27.25.png]]]> QuackingPlums Slic3r Tue, 30 Sep 2014 03:33:58 -0400 https://reprap.org/forum/read.php?263,413224,413361#msg-413361 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,413361#msg-413361
Quote
QuackingPlums
There were multiple items in your .skp file. I'm guessing you want the 2D 'flat' version of it like this?:
[attachment 41214 Logotiabauniversity.stl]



i try to open it in pronterface it shows as one small object
i want to print it in 1.5 cm high
15*15 cm length and width]]> Omar991 Slic3r Mon, 29 Sep 2014 13:02:00 -0400 https://reprap.org/forum/read.php?263,413224,413359#msg-413359 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,413359#msg-413359
Quote
dmould
The G-code will depend on the slicer setting required by your particular printer, so it is not possible to create a g-code file for you without knowing what settings your printer needs. It sounds like you need to rotate the part to get the correct surface flat onto the bed. I am not familiar with Sketchup, but I expect it will allow you to rotate the part. If not you can export an STL and load it into Cura or another slicing program that allows you to rotate in X or Y axis (I think Slic3r only allows rotation around Z).

I cannot use your .skp file (as said, I don't use sketchup), but if you would like to post the STL that Sketchup exports, I can rotate it using OpenScad to an orientation suitable for loading into the slicing program used by Proterface (probably Slic3r).

Dave

ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ

that r 2 file are u requested]]> Omar991 Slic3r Mon, 29 Sep 2014 12:59:14 -0400 https://reprap.org/forum/read.php?263,413224,413263#msg-413263 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,413263#msg-413263 [attachment 41214 Logotiabauniversity.stl]]]> QuackingPlums Slic3r Mon, 29 Sep 2014 09:31:11 -0400 https://reprap.org/forum/read.php?263,413224,413257#msg-413257 Re: any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,413257#msg-413257
I cannot use your .skp file (as said, I don't use sketchup), but if you would like to post the STL that Sketchup exports, I can rotate it using OpenScad to an orientation suitable for loading into the slicing program used by Proterface (probably Slic3r).

Dave]]> dmould Slic3r Mon, 29 Sep 2014 09:15:05 -0400 https://reprap.org/forum/read.php?263,413224,413224#msg-413224 any body can help plz :(:( https://reprap.org/forum/read.php?263,413224,413224#msg-413224
i have a 3d design on sketchup file that i attached
and i want to convert it to STL file OR G-code file
to print it by pronterface

i try to convert the design by sketchup but still pronterface can not open it or
it convert but in different shape


can any body give the STL file Or G-code ( after converting)
that make the design in horizontal shape
to let me print it in plate the has square shape (15*15 cm)


thx]]> Omar991 Slic3r Mon, 29 Sep 2014 07:30:37 -0400