SLIC3r messing up again I was a third of the way through an ABS print at 240C when the temperature dropped to 225C jamming the extruder. Here is the offending G-Code: 295 G1 X88.045 Y113.696 E74.47561 296 G1 X87.204 Y113.696 E74.51719 297 G1 X86.304 Y112.796 E74.58017 298 G1 X86.304 Y113.637 E74.62175 299 G1 X86.363 Y113.696 E74.62591 300 M104 S225 ; set temperature 301 G1 Z0.412 F7800.000 302 G1 F1800.000 E72.62591 303 G92 E0 304 G1 X92.000 Y114.000 F7800.000 305 G1 X91.000 Y117.000 F7800.000 306 G1 X85.000 Y122.200 F7800.000 307 G1 E2.00000 F1800.000 308 G1 X83.600 Y122.060 E2.04960 F1200 309 G1 X82.240 Y121.650 E2.09968 310 G1 X81.000 Y120.990 E2.14921 311 G1 X79.910 Y120.090 E2.19904 312 G1 X79.010 Y119.000 E2.24888 Line 300 lowers the temperature, WHY? Thanks for any help or suggestions! https://reprap.org/forum/read.php?263,421584,421584#msg-421584 Thu, 10 Sep 2026 06:04:31 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?263,421584,421762#msg-421762 Re: SLIC3r messing up again https://reprap.org/forum/read.php?263,421584,421762#msg-421762
But I went back and checked and you are correct first layer 240C other layers 225C.

If it had failed on layer 2, I would have guessed that was the problem but it waited for layer 17 to show up.

Thank you fixed it now on to my next problems.]]> Ralphxyz Slic3r Sun, 19 Oct 2014 20:38:45 -0400 https://reprap.org/forum/read.php?263,421584,421590#msg-421590 Re: SLIC3r messing up again https://reprap.org/forum/read.php?263,421584,421590#msg-421590 dc42 Slic3r Sun, 19 Oct 2014 11:56:10 -0400 https://reprap.org/forum/read.php?263,421584,421584#msg-421584 SLIC3r messing up again https://reprap.org/forum/read.php?263,421584,421584#msg-421584
Here is the offending G-Code:

295 G1 X88.045 Y113.696 E74.47561
296 G1 X87.204 Y113.696 E74.51719
297 G1 X86.304 Y112.796 E74.58017
298 G1 X86.304 Y113.637 E74.62175
299 G1 X86.363 Y113.696 E74.62591
300 M104 S225 ; set temperature
301 G1 Z0.412 F7800.000
302 G1 F1800.000 E72.62591
303 G92 E0
304 G1 X92.000 Y114.000 F7800.000
305 G1 X91.000 Y117.000 F7800.000
306 G1 X85.000 Y122.200 F7800.000
307 G1 E2.00000 F1800.000
308 G1 X83.600 Y122.060 E2.04960 F1200
309 G1 X82.240 Y121.650 E2.09968
310 G1 X81.000 Y120.990 E2.14921
311 G1 X79.910 Y120.090 E2.19904
312 G1 X79.010 Y119.000 E2.24888

Line 300 lowers the temperature, WHY?

Thanks for any help or suggestions!]]> Ralphxyz Slic3r Sun, 19 Oct 2014 11:36:16 -0400