I'm trying to setup the server on a Raspberry Pi to control a Mendel 90, but I can't seem to get the server to actually do anything with the printer. It will connect and claim that it is online, but no commands work (manually types or button driven, there is nothing visable in the Printer Log. All temperatures read 0, so I'm assuming that it really isn't connected correctly. I've used the printer in Host 0.85b on a Windows box and most of the settings I'm using in the config are copied from there. I've set the baud rates everywhere including the Marlin firmware to 115200. Also I am able to easily connect and control the printer via pronsole without issue. What am I missing here? https://reprap.org/forum/read.php?267,206753,206753#msg-206753 Fri, 11 Sep 2026 10:09:56 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?267,206753,207269#msg-207269 https://reprap.org/forum/read.php?267,206753,207269#msg-207269 repetier Repetier Fri, 10 May 2013 10:31:21 -0400 https://reprap.org/forum/read.php?267,206753,207240#msg-207240 https://reprap.org/forum/read.php?267,206753,207240#msg-207240
Anyway I can get it to connect without manually pushing the button? It's not a big deal, I guess, since I would only need to do it if I power cycled the printer/pi.]]> daichiasuka Repetier Fri, 10 May 2013 09:22:46 -0400 https://reprap.org/forum/read.php?267,206753,206922#msg-206922 https://reprap.org/forum/read.php?267,206753,206922#msg-206922 repetier Repetier Thu, 09 May 2013 13:41:43 -0400 https://reprap.org/forum/read.php?267,206753,206801#msg-206801 https://reprap.org/forum/read.php?267,206753,206801#msg-206801 daichiasuka Repetier Thu, 09 May 2013 06:19:49 -0400 https://reprap.org/forum/read.php?267,206753,206784#msg-206784 https://reprap.org/forum/read.php?267,206753,206784#msg-206784 repetier Repetier Thu, 09 May 2013 05:00:33 -0400 https://reprap.org/forum/read.php?267,206753,206753#msg-206753 https://reprap.org/forum/read.php?267,206753,206753#msg-206753
I've used the printer in Host 0.85b on a Windows box and most of the settings I'm using in the config are copied from there. I've set the baud rates everywhere including the Marlin firmware to 115200. Also I am able to easily connect and control the printer via pronsole without issue.

What am I missing here?]]> daichiasuka Repetier Thu, 09 May 2013 01:08:19 -0400