Repetier 0.92 - mix optical and mechanical endstops ? Hi all I'm in the process of moving from a GEN7 1.5 AVR (thank you Traumflug for this superb controller board) running Repetier 0.92 to a RAMPS 1.4 (that will have the same FW) in order to add an additional extruder to my Prusa i2. The GEN7 only supports 3 endstops (min) while the RAMPS supports both min and max endstops for each axis. I'm using 3 mechanical endstops with the GEN7 for the min of each axis but would like to use 3 additional optical endstops that I have lying around as max endstops. So my question is the following, is it possible to mix optical and mechanical endstops in the same build ? Any special configuration or thing that I have to take into account ? Thanks for your help Michele https://reprap.org/forum/read.php?267,405102,405102#msg-405102 Sat, 14 Mar 2026 12:37:34 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?267,405102,405133#msg-405133 Re: Repetier 0.92 - mix optical and mechanical endstops ? https://reprap.org/forum/read.php?267,405102,405133#msg-405133
And thanks for answering my question.

Regards]]> micheleamerica Repetier Tue, 09 Sep 2014 09:45:07 -0400 https://reprap.org/forum/read.php?267,405102,405111#msg-405111 Re: Repetier 0.92 - mix optical and mechanical endstops ? https://reprap.org/forum/read.php?267,405102,405111#msg-405111 repetier Repetier Tue, 09 Sep 2014 09:00:18 -0400 https://reprap.org/forum/read.php?267,405102,405102#msg-405102 Repetier 0.92 - mix optical and mechanical endstops ? https://reprap.org/forum/read.php?267,405102,405102#msg-405102 I'm in the process of moving from a GEN7 1.5 AVR (thank you Traumflug for this superb controller board) running Repetier 0.92 to a RAMPS 1.4 (that will have the same FW) in order to add an additional extruder to my Prusa i2.

The GEN7 only supports 3 endstops (min) while the RAMPS supports both min and max endstops for each axis.

I'm using 3 mechanical endstops with the GEN7 for the min of each axis but would like to use 3 additional optical endstops that I have lying around as max endstops. So my question is the following, is it possible to mix optical and mechanical endstops in the same build ? Any special configuration or thing that I have to take into account ?

Thanks for your help

Michele]]> micheleamerica Repetier Tue, 09 Sep 2014 08:33:21 -0400