Repetier Host and DUE Board I have just purchased a Due board managed to upload Repetier v0.92 Firmware to it using the Programming port. However I can't get it to talk to Repetier host (Either 0.95 or 1.05) I have set the reset to Due Native USB. The board appears to connect but I get 1 command waiting and this number then increments each time I try and send any characters from the G-Code entry box. Is there any way of testing the board to see if it is a problem with the board or if it is with my setup ( I have noticed that the driver for the Native port seems to vary between a bossa usb port and a Arduino native usb seemingly at will depending what it picks up at the time which is why I suspect the board may be faulty especially has it had a little solder splash across the front of the USB socket but it didn't extend into the socket). Any advise welcome. Doug Now sorted updated to latest Arduino (V1.5.8) re compiled and uploaded firmware then connected to Rep-Host using the PROGRAMMING Port and it now connects and talks correctly and can read the EEPROM Data from the radds board so happy days!:)-D https://reprap.org/forum/read.php?267,419630,419630#msg-419630 Mon, 16 Mar 2026 07:13:59 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?267,419630,419848#msg-419848 Re: Repetier Host and DUE Board https://reprap.org/forum/read.php?267,419630,419848#msg-419848
Quote
repetier
Ok, updated config tool to include T4.

Thank you so much kind sir:)-D]]> dougal1957 Repetier Wed, 15 Oct 2014 12:03:22 -0400 https://reprap.org/forum/read.php?267,419630,419845#msg-419845 Re: Repetier Host and DUE Board https://reprap.org/forum/read.php?267,419630,419845#msg-419845 repetier Repetier Wed, 15 Oct 2014 12:00:12 -0400 https://reprap.org/forum/read.php?267,419630,419764#msg-419764 Re: Repetier Host and DUE Board https://reprap.org/forum/read.php?267,419630,419764#msg-419764
Doug]]> dougal1957 Repetier Wed, 15 Oct 2014 09:20:37 -0400 https://reprap.org/forum/read.php?267,419630,419762#msg-419762 Re: Repetier Host and DUE Board https://reprap.org/forum/read.php?267,419630,419762#msg-419762 repetier Repetier Wed, 15 Oct 2014 09:16:53 -0400 https://reprap.org/forum/read.php?267,419630,419630#msg-419630 Repetier Host and DUE Board https://reprap.org/forum/read.php?267,419630,419630#msg-419630
Is there any way of testing the board to see if it is a problem with the board or if it is with my setup ( I have noticed that the driver for the Native port seems to vary between a bossa usb port and a Arduino native usb seemingly at will depending what it picks up at the time which is why I suspect the board may be faulty especially has it had a little solder splash across the front of the USB socket but it didn't extend into the socket).

Any advise welcome.

Doug

Now sorted updated to latest Arduino (V1.5.8) re compiled and uploaded firmware then connected to Rep-Host using the PROGRAMMING Port and it now connects and talks correctly and can read the EEPROM Data from the radds board so happy days!:)-D]]> dougal1957 Repetier Wed, 15 Oct 2014 04:18:06 -0400