Hi all, My printer will send all axes home when I push the home button, but I can't get any other movement using any manual controls or G code commands. I am using a custom printer with Marlin firmware comfigured for a Prusa i3. Any help is appreciated. Best, Richard https://reprap.org/forum/read.php?267,560838,560838#msg-560838 Sat, 10 Oct 2026 04:45:29 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?267,560838,583999#msg-583999 https://reprap.org/forum/read.php?267,560838,583999#msg-583999 repetier Repetier Fri, 13 Nov 2015 10:26:39 -0500 https://reprap.org/forum/read.php?267,560838,583853#msg-583853 https://reprap.org/forum/read.php?267,560838,583853#msg-583853
i'm having the exact same problem for a few hours now. I had the Printer up and running (Arduino Mega, RAMPS 1.4) and just replaced the hotend (working without problems), when suddenly that problem appeared: homing works fine, then no more movement. Many hours of research didn't give me any answer and this is the only result, that actually deals with the exact same problem. I've also tried everything that could even remotely be connected to the problem, but nothing solved it. Just as i'm writing this, i all of a sudden could move the z-axis manually after homing and then suddenly the heatsink fan stopped, but z-axis and homing is still working flawlessly.

This is really confusing. I mean, eveything works totally fine when homing, so what can be the problem.
I'd also really appreciate any help for me and Richard.

Best,
Marvin]]> verner33 Repetier Fri, 13 Nov 2015 03:04:53 -0500 https://reprap.org/forum/read.php?267,560838,560838#msg-560838 https://reprap.org/forum/read.php?267,560838,560838#msg-560838 My printer will send all axes home when I push the home button, but I can't get any other movement using any manual controls or G code commands. I am using a custom printer with Marlin firmware comfigured for a Prusa i3. Any help is appreciated.
Best,
Richard]]> RichardA Repetier Sun, 20 Sep 2015 20:12:14 -0400