Forum reorganization As was suggested in the Reprap 2014 thread in the general section, i'm starting a thread here to discuss structural changes to the forum, for greater clarity and brevity. First, under machine variations, i suggest a forum specifically for official reprap machines, with subforums for each bot (or perhaps just a "legacy Repraps" subforum as a catch-all for darwin and Sells designs) Second, get rid of all the other forums under machine variations. replace them with either kinematic-based forums (ie, cartesean, delta, polar) or with build-method-based (ie. FDM, SLS, etc.) and put the old forums under these (if keeping them at all). third, condense the electronics forums into a single forum. Same for software and firmware. I designed the Prism Printer, and there is a forum just for it, but there are so few posts that i think it could all just be put into the extruded aluminum folder. That's all i have for now. https://reprap.org/forum/read.php?33,327342,327342#msg-327342 Thu, 16 Apr 2026 03:15:29 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?33,327342,330676#msg-330676 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,330676#msg-330676
Quote
MattMoses
Much as I love the idea of Bounties, that subforum is stone cold dead and should be moved elsewhere.

Moving it elsewhere makes it even more invisible.

Looking through what's discussed, I actually can't much request for improvements. If something doesn't work, 99 of 100 people search the problem with selfs, in how they handle the stuff. The idea that something is poorly designed and needs improvement is rarely seen ... at least rarely discussed.

Does this observation match other impressions? What can we learn from it?]]> Traumflug Administration, Announcements, Policy Thu, 27 Mar 2014 05:32:54 -0400 https://reprap.org/forum/read.php?33,327342,330655#msg-330655 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,330655#msg-330655
Quote
A2
Quote
thejollygrimreaper
if there is any deviation from the drawings like there is then they should be called something else and not ride on the jhead name and faith people have in it,


[www.geeetech.com]

It appears that geeetech has taken great liberties with the J-head name, as it looks nothing like a J-head to me.

So what is being proposed is a list of non-approved versions of the J-head, and the bugger who is selling it?
What other hot ends deemed originals will be on this watch list?

whats being proposed and is now in place on the jhead wiki page is the seperation of the different suppliers, ideally we should apply this kind of thing to as many of the specialized components as we can and support the developers as much as possible, i think this gives developers a bit more incentive to keep developing but also anyone who wants to produce and opensource incentive to get themselves on the approved list of supplier,
]]> thejollygrimreaper Administration, Announcements, Policy Thu, 27 Mar 2014 04:26:57 -0400 https://reprap.org/forum/read.php?33,327342,330652#msg-330652 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,330652#msg-330652
Quote
thejollygrimreaper
if there is any deviation from the drawings like there is then they should be called something else and not ride on the jhead name and faith people have in it,


[www.geeetech.com]

It appears that geeetech has taken great liberties with the J-head name, as it looks nothing like a J-head to me.

So what is being proposed is a list of non-approved versions of the J-head, and the bugger who is selling it?
What other hot ends deemed originals will be on this watch list?
]]> A2 Administration, Announcements, Policy Thu, 27 Mar 2014 04:06:40 -0400 https://reprap.org/forum/read.php?33,327342,330596#msg-330596 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,330596#msg-330596
Quote
samp20
Do we need the Reprappers forum?
Personally I've always thought the Reprappers forum was kind of redundant compared with General and Developers... But Reprappers is consistently very active. The people that post in it seem to be happy with it. In general I would be hesitant to mess with a subforum that gets a lot of traffic.

On a related note: Much as I love the idea of Bounties, that subforum is stone cold dead and should be moved elsewhere. It really looks out of place in between the high traffic forums at the top of the list.

Maybe we can start a wiki page and use tables to visualize proposed "before and after" reorganizations. I've seen several good ideas posted here already, but it is pretty hard to visualize and keep track of the different suggestions.]]> MattMoses Administration, Announcements, Policy Wed, 26 Mar 2014 22:31:22 -0400 https://reprap.org/forum/read.php?33,327342,330314#msg-330314 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,330314#msg-330314
If that's not an option then the description and/or title of the Reprappers forum needs to be updated to something more descriptive.]]> samp20 Administration, Announcements, Policy Wed, 26 Mar 2014 09:52:48 -0400 https://reprap.org/forum/read.php?33,327342,330262#msg-330262 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,330262#msg-330262
Quote
thejollygrimreaper
if there is agreeance with that i'll talk to brian on irc as soon as he gets on again and implement it

Yes, please go ahead. Especially I'd be interested if he's willing to maintain the sorting into both subcategories himself. He's the one who can decide about the topic, so it would be nice if he'd do the wiki editing, too.]]> Traumflug Administration, Announcements, Policy Wed, 26 Mar 2014 07:54:13 -0400 https://reprap.org/forum/read.php?33,327342,330164#msg-330164 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,330164#msg-330164
Quote
A2
What incentive is there for a developer/manufacturer/seller to approve a competitors copy of his design.

A part could meet dimensional requirements, but if a different machine, or a slightly different material was used, then the quality/robustness of the device has changed.
This would mislead a consumer into thinking they are purchasing an equivalent product.

most if not all the clones don't even meet the dimensional requirements of the version of the jhead they are sold as, and thats to start with, they not only use different materials as well, but also put them through no actual testing and are in it purely for the quick money,

if they want to produce jheads then they need to do it properly and to the drawings provided then they can call them jheads, if there is any deviation from the drawings like there is then they should be called something else and not ride on the jhead name and faith people have in it,

for more information on the topic have a read here: http://jheadnozzle.blogspot.com.au/

the question i ask is what incentive is there for developers to keep developing something if it is misrepresented by being made badily/incorrectly?

i personally don't believe we should stick our heads in the sand under the guise of "it's opensource" and ignore these people especially to the detriment of the developer, if anything sorting/removing links to those who don't play along should be incentive enough to pull their socks up and get it right]]> thejollygrimreaper Administration, Announcements, Policy Wed, 26 Mar 2014 02:13:15 -0400 https://reprap.org/forum/read.php?33,327342,330159#msg-330159 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,330159#msg-330159
A part could meet dimensional requirements, but if a different machine, or a slightly different material was used, then the quality/robustness of the device has changed.
This would mislead a consumer into thinking they are purchasing an equivalent product.]]> A2 Administration, Announcements, Policy Wed, 26 Mar 2014 01:29:23 -0400 https://reprap.org/forum/read.php?33,327342,329971#msg-329971 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,329971#msg-329971
Quote
thejollygrimreaper
Quote
Traumflug
One strategy could be to make two vendor sections, "authorized vendors" and "other vendors". Only sellers authorized by the developer himself would got into "authorized vendors". This way every seller finds his place and there's a distinction of the items known to be good and those of not yet defined quality (which can be good, too, of course).

i like this idea, it would give the developers a bit more control and go a long way to helping new people avoid dodgy components , i think the jhead wiki page might be a good candidate for a test to see how it pans out, if there is agreeance with that i'll talk to brian on irc as soon as he gets on again and implement it

I agree with it.]]> NewPerfection Administration, Announcements, Policy Tue, 25 Mar 2014 14:36:11 -0400 https://reprap.org/forum/read.php?33,327342,329774#msg-329774 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,329774#msg-329774
Quote
Traumflug
Just FYI, I'm all for identifying scrap, too, I just don't see how it can be done reliably. Instead I see heated debates based on very weak arguments.

One strategy could be to make two vendor sections, "authorized vendors" and "other vendors". Only sellers authorized by the developer himself would got into "authorized vendors". This way every seller finds his place and there's a distinction of the items known to be good and those of not yet defined quality (which can be good, too, of course).

i like this idea, it would give the developers a bit more control and go a long way to helping new people avoid dodgy components , i think the jhead wiki page might be a good candidate for a test to see how it pans out, if there is agreeance with that i'll talk to brian on irc as soon as he gets on again and implement it]]> thejollygrimreaper Administration, Announcements, Policy Tue, 25 Mar 2014 04:55:04 -0400 https://reprap.org/forum/read.php?33,327342,329759#msg-329759 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,329759#msg-329759
One strategy could be to make two vendor sections, "authorized vendors" and "other vendors". Only sellers authorized by the developer himself would got into "authorized vendors". This way every seller finds his place and there's a distinction of the items known to be good and those of not yet defined quality (which can be good, too, of course).]]> Traumflug Administration, Announcements, Policy Tue, 25 Mar 2014 04:21:39 -0400 https://reprap.org/forum/read.php?33,327342,329364#msg-329364 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,329364#msg-329364
Quote
thejollygrimreaper
most of the time the differences can be seen in the photos the seller uses

In some cases though the sellers aren't that honest, and use misleading descriptions and photos. For example: [www.reprapit.com] They use the J-Head photo and description ripped straight from the wiki, but seem to be selling knock-off J-Heads. See: [forums.reprap.org] I never got a definitive reply, but in either case they shouldn't be using the image from the wiki unless they are actually re-selling hot ends from Brian.

Quote
thejollygrimreaper
defective or not, in a lot of cases there are significant differences which should render the product a variant anyway and should stand on it's own two feet , not ride on another manufacturers reputation and deceive people who simply don't know any better, this is why i think the links in the wiki should either be removed or warnings attached next to them,

I agree.]]> NewPerfection Administration, Announcements, Policy Mon, 24 Mar 2014 10:36:37 -0400 https://reprap.org/forum/read.php?33,327342,328367#msg-328367 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,328367#msg-328367
Quote
Traumflug
Quote
MattMoses
How about this: if there is a link to a product that is known to be defective

How would you know a product to be "defective"? You have no sample yourself and the vendor will deny this immediately.

defective or not, in a lot of cases there are significant differences which should render the product a variant anyway and should stand on it's own two feet , not ride on another manufacturers reputation and deceive people who simply don't know any better, this is why i think the links in the wiki should either be removed or warnings attached next to them, most of the time the differences can be seen in the photos the seller uses]]> thejollygrimreaper Administration, Announcements, Policy Sat, 22 Mar 2014 07:16:06 -0400 https://reprap.org/forum/read.php?33,327342,328359#msg-328359 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,328359#msg-328359
Quote
MattMoses
How about this: if there is a link to a product that is known to be defective

How would you know a product to be "defective"? You have no sample yourself and the vendor will deny this immediately.]]> Traumflug Administration, Announcements, Policy Sat, 22 Mar 2014 06:55:15 -0400 https://reprap.org/forum/read.php?33,327342,328290#msg-328290 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,328290#msg-328290
Quote
thejollygrimreaper
but i'm more concerned about the webshops for example that do things like stock the clone jheads which are made so badily they don't even have the right number of slots in them, and have given people all sorts of jamming trouble because they haven't seen a day of testing
How about this: if there is a link to a product that is known to be defective, add a warning and/or a link to a review, forum discussion, or some other source. Fight the problem with additional information.]]> MattMoses Administration, Announcements, Policy Sat, 22 Mar 2014 00:12:53 -0400 https://reprap.org/forum/read.php?33,327342,328289#msg-328289 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,328289#msg-328289
Quote
MattMoses
Quote
thejollygrimreaper
this is supposed to be about self replicating machines , in what world are printers like the eventorbot self replicating? why are they on this page at all? then there are the ones which use tslot as their primary structure ...
You will not find a bigger fanboy for self-replicating machines than myself ;) but even I acknowledge that if we kick out every piece of work that doesn't deal directly with self-replicating machines, we are not going to be left with much.

A big part of RepRap is also promoting open source hardware in low cost 3D printers. RepRap started this whole thing, and RepRap has a good chance of remaining the "go to" place for open source advanced manufacturing, unless we do something stupid and scare away everyone doing research on the topic.

Personally, I think the eventorbot is "moving away from self-replicating" compared to earlier designs, but ya know what? They've got a nice page on the wiki, the design files are easily available, the printer can print some of its own parts... I think it totally deserves a spot on the RepRap options page. (side note: the fact the handful of people participating in this thread can't agree on what should be on that page does not bode well for any type of reorganization process...)

When I see 32 machines on the RepRap options page I think "Wow, all of these printers came out of the RepRap project. All of these designs are part of the RepRap project. I want to design a printer that goes on this list. What is my printer going to look like?" So I don't see it as a bad thing...

Regarding the commercial links, I find it annoying when people edit the wiki only to put a link to their offsite shop. Some people have dozens of edits and every single one of them is just adding a one-line link to their crappy blog. I am fine if we try to reduce that behavior. But I think it is a bad bad idea to be too restrictive about what kind of links we allow. It will give reprap.org a bad reputation as a place that is unfriendly to small businesses. (I think that's bad and I'm not even selling anything!)

My recommendation is to always err on the side of less rules instead of more rules, and to deal with bad behavior (spam, blatant advertising, etc) on a case by case basis.

by all means we probably should ease up on a rule or two, but i'm more concerned about the webshops for example that do things like stock the clone jheads which are made so badily they don't even have the right number of slots in them, and have given people all sorts of jamming trouble because they haven't seen a day of testing they've just been produced to make money, personally i think these are the shops that do this sort of activity we should remove we are not obligated to keep them and to an extent we are condoning their activity which just hurts the developer]]> thejollygrimreaper Administration, Announcements, Policy Sat, 22 Mar 2014 00:07:39 -0400 https://reprap.org/forum/read.php?33,327342,328285#msg-328285 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,328285#msg-328285
Quote
thejollygrimreaper
this is supposed to be about self replicating machines , in what world are printers like the eventorbot self replicating? why are they on this page at all? then there are the ones which use tslot as their primary structure ...
You will not find a bigger fanboy for self-replicating machines than myself ;) but even I acknowledge that if we kick out every piece of work that doesn't deal directly with self-replicating machines, we are not going to be left with much.

A big part of RepRap is also promoting open source hardware in low cost 3D printers. RepRap started this whole thing, and RepRap has a good chance of remaining the "go to" place for open source advanced manufacturing, unless we do something stupid and scare away everyone doing research on the topic.

Personally, I think the eventorbot is "moving away from self-replicating" compared to earlier designs, but ya know what? They've got a nice page on the wiki, the design files are easily available, the printer can print some of its own parts... I think it totally deserves a spot on the RepRap options page. (side note: the fact the handful of people participating in this thread can't agree on what should be on that page does not bode well for any type of reorganization process...)

When I see 32 machines on the RepRap options page I think "Wow, all of these printers came out of the RepRap project. All of these designs are part of the RepRap project. I want to design a printer that goes on this list. What is my printer going to look like?" So I don't see it as a bad thing...

Regarding the commercial links, I find it annoying when people edit the wiki only to put a link to their offsite shop. Some people have dozens of edits and every single one of them is just adding a one-line link to their crappy blog. I am fine if we try to reduce that behavior. But I think it is a bad bad idea to be too restrictive about what kind of links we allow. It will give reprap.org a bad reputation as a place that is unfriendly to small businesses. (I think that's bad and I'm not even selling anything!)

My recommendation is to always err on the side of less rules instead of more rules, and to deal with bad behavior (spam, blatant advertising, etc) on a case by case basis.]]> MattMoses Administration, Announcements, Policy Fri, 21 Mar 2014 23:43:01 -0400 https://reprap.org/forum/read.php?33,327342,328279#msg-328279 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,328279#msg-328279
Quote
Buback
I know there's no 'reprap administration' but i like this idea that we remove any printers that don't contribute monetary funds back to reprap.org. maybe with more funds reprap could hire a web developer...

it not so much about sending funds to reprap.org, but more about not linking to places who don't put back into the community in anyway]]> thejollygrimreaper Administration, Announcements, Policy Fri, 21 Mar 2014 22:54:10 -0400 https://reprap.org/forum/read.php?33,327342,328278#msg-328278 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,328278#msg-328278 Buback Administration, Announcements, Policy Fri, 21 Mar 2014 22:49:20 -0400 https://reprap.org/forum/read.php?33,327342,328277#msg-328277 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,328277#msg-328277
the wiki is currently abused by people whose sole contribution is an external link to their website, i think we need to seriously reconsider a good percentage of them since most of them don't have interest other than making money off us and purge them from the wiki, doing this alone will help drive traffic to developer owned web shops which will give them more cash-flow and more money to spend on development the knock on effect would be developers seeing more value in the wiki than they currently do

i think the reason the build a reprap page is restricted is because it would just look like the reprap options
and looking at the reprap options page ..... seriously?

this is supposed to be about self replicating machines , in what world are printers like the eventorbot self replicating? why are they on this page at all? then there are the ones which use tslot as their primary structure ...

there are 32 printers on that page and only a handfull of them have any focus on self replication, and the most promising in that department is the tantilus


i suggest that as part of any clean up on the wiki that we remove/declare obsolete/legacy some of these printers, and remove any/all commercial links to webshops which don't support the reprep community or it's developers in anyway that exist on the forum/wiki

we really should have 1 wiki page that lists suppliers and everything link to that i think currently we have 10 to 15 pages which list the same suppliers]]> thejollygrimreaper Administration, Announcements, Policy Fri, 21 Mar 2014 22:36:53 -0400 https://reprap.org/forum/read.php?33,327342,327892#msg-327892 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,327892#msg-327892
Quote
MattMoses
Quote
Sublime
I actually feel there should be no pages that have limited access and make decisions for people. That is the page I linked to should not exist and the home page should not have any machine specific information on it.
This sounds OK to me. I like the RepRap Options page (even though it is disorganized) and it does not have any editing restrictions. The Build A RepRap page (the one with editing restrictions) seems to be really out of date anyway... A simple thing to do would be to change the link(s) on the main page so they all point to RepRap Options... We would probably need Adrian's OK, however.

Hopefully someone with the know how or privilages will read this and let us know. If that does not happen in the next say week maybe we should start a thread to request it?

Quote
MattMoses
Quote
Sublime
I did add Tantillus to myself but it was after I closed my store and none of this was about promoting sales
I didn't know you closed your store. Will keep this in mind in the future... Just a general comment, Sublime: if you want Admin privileges, just ask (probably Traumflug or VDX). Unless there is bad blood I don't know about, I don't think anyone would object to you being an admin. (For example I got involved just by volunteering to help clean up spam.)

I became a stay at home dad and was left with very little time to spend in the garage. I am about to have even less time soon. I do still make a few hobbed bolts but that is about it.

I have thought about being an Admin but I know myself too well and understand that I am opinionated and that can get in the way. Although I have wanted many times to move threads that are posted in the wrong sections (some times that seems like it would be a never ending battle).]]> Sublime Administration, Announcements, Policy Fri, 21 Mar 2014 01:43:56 -0400 https://reprap.org/forum/read.php?33,327342,327879#msg-327879 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,327879#msg-327879
Quote
Sublime
I actually feel there should be no pages that have limited access and make decisions for people. That is the page I linked to should not exist and the home page should not have any machine specific information on it.
This sounds OK to me. I like the RepRap Options page (even though it is disorganized) and it does not have any editing restrictions. The Build A RepRap page (the one with editing restrictions) seems to be really out of date anyway... A simple thing to do would be to change the link(s) on the main page so they all point to RepRap Options... We would probably need Adrian's OK, however.

Quote
Sublime
I did add Tantillus to myself but it was after I closed my store and none of this was about promoting sales
I didn't know you closed your store. Will keep this in mind in the future... Just a general comment, Sublime: if you want Admin privileges, just ask (probably Traumflug or VDX). Unless there is bad blood I don't know about, I don't think anyone would object to you being an admin. (For example I got involved just by volunteering to help clean up spam.)

Quote
NewPerfection
I don't know how the sidebar is edited... Maybe one of the other admins knows.
The wiki sidebar is here. It does not appear to be locked (to me anyway).

As for IRC, I don't have strong opinions one way or the other. I'm actually in the process of editing and converting the kthx factoids to add to the Glossary but I'm not convinced it is worth the effort. (A large fraction of the factoids are nothing more than profanity-laced inside jokes, to be honest.) But I think it is silly for the RepRap community to split into fragments just because some people use IRC and some use the forums... Hence any kind of interaction between the groups is helpful, in my opinion. Kind of reminds me of this xkcd about crazy straws.]]> MattMoses Administration, Announcements, Policy Fri, 21 Mar 2014 00:46:20 -0400 https://reprap.org/forum/read.php?33,327342,327784#msg-327784 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,327784#msg-327784
Quote
Sublime
I just talked about this in the thread in the general section but I will say it here again. IRC only holds people responsible for misinformation for the time it takes for the conversation to be pushed off the page which means bad advice gets proliferated or sends people off on wild goose chases without anyone being able to come along a day later to add to the conversation or correct it.

As for the side bar, is this another thing only editable by certain people? Maybe those that use IRC to influence people into their way without worry of actually having to defend what they say because the conversation is not preserved like on the forum?

I don't like the IRC channel personally. I find it useful to get into immediate contact with certain people, but that's all I use it for. I've tried to get on there to help and whatnot, but everything just gets drowned out in the noise. It's so much worse than the forums.

I don't know how the sidebar is edited. I can't find an option to do so anywhere on the wiki. Maybe one of the other admins knows.]]> NewPerfection Administration, Announcements, Policy Thu, 20 Mar 2014 17:48:24 -0400 https://reprap.org/forum/read.php?33,327342,327766#msg-327766 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,327766#msg-327766
Quote
MattMoses
Quote
Sublime
Right now the cover page of the wiki has a link to this page [reprap.org] which can only be edited by a few privileged persons who are basically using it as an AD for their machines.
Maybe for full disclosure you should also mention that the cover page of the wiki has a link to this page RepRap Options, and one of the machines on that page is this one and one of the dedicated subforums on this website is this one. It doesn't seem like you are being deprived of publicity... ;)

Sorry I hope that did not sound like I was whining. I actually feel there should be no pages that have limited access and make decisions for people. That is the page I linked to should not exist and the home page should not have any machine specific information on it. I would also like to say that the page you linked to with my Tantillus design I did add Tantillus to myself but it was after I closed my store and none of this was about promoting sales. It was about promoting evolution and the machine I promote the most lately is Ingentis which does not have a wiki page at all and all the development is happening either in the Tantillus forum or on G+ (which I am not a fan of).

Quote
MattMoses
I don't know how many people remember the last time there was discussion about updating the official machines page, but it didn't go well. Here is what the hard-working volunteer had to say about it after trying to come up with a reasonable solution:
Quote
spacexula
I got enough nasty emails and conversations questioning my character that I am really not intersted in continuing the update of the front page any further. If someone else wants to take up the project have at it. I am done.

I do remember that and again this comes down to there is no way to define an official RepRap and whenever a page tries influence opinion it ends up in fights and problems. Hence my suggestions of that page not existing and only having factual pages with indexing based on tags.

Quote
MattMoses
Quote
Sublime
If IRC is not an official place I think it should be removed from the Forum heading, if it s an official place it should not have AD's in its header.
A lot of people on IRC think that IRC is the official seat of RepRap. I suggested we put the IRC button up at the top of the forums in an attempt to foster more interaction between the two (largely separate) groups. (The wiki has had a link to IRC in the sidebar since forever.)

I just talked about this in the thread in the general section but I will say it here again. IRC only holds people responsible for misinformation for the time it takes for the conversation to be pushed off the page which means bad advice gets proliferated or sends people off on wild goose chases without anyone being able to come along a day later to add to the conversation or correct it.

As for the side bar, is this another thing only editable by certain people? Maybe those that use IRC to influence people into their way without worry of actually having to defend what they say because the conversation is not preserved like on the forum?

Quote
MattMoses
Quote
Sublime
If you look at the current designs they are actually going away from that. Most of them use fancy lead screws and extruded aluminum and special v-slides etc. The only machines that have been designed lately that I would consider closer to the original goal would be the work of Nicolas Seward but those are not the ones being promoted by the homepage of RepRap or IRC which promote those that use less replicating parts then their predecessor. The entire project is going backwards if we keep promoting the designs that are the fastest to manufacture. It should not matter if it takes a day or a year to self replicate if it means you do not need to rely on a corporation to manufacture part of your machine that is not necessary (like lead screws can be replaced with levers or strings or fluid)(Or frames that can be printed).
I agree completely. But I think that if reprap ignores the trends of more conventional low-cost 3d printing, it will lose even more relevance. The commercial side of things is not going to go away, and I think people who care about the future of RepRap should acknowledge that. But I also think we can strike a balance between the mundane commercial work going on and cutting edge research into new fabrication methods, self-replication, and so on. We gotta be realistic. :)

Agreed and I am not trying to argue here. A lot of those things that make for cheap kits make very expensive self sourced machines. But a lot of what makes for cheap self sourced machines does not make for an expensive kit.]]> Sublime Administration, Announcements, Policy Thu, 20 Mar 2014 16:49:03 -0400 https://reprap.org/forum/read.php?33,327342,327763#msg-327763 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,327763#msg-327763
Back on topic for a sec:
Consolidating the forums will make them easier to moderate, seemingly. tech support or "what should i build/buy" questions really clog up every other subforum. I think most readers are leary of reporting such topics because it makes you feel like a (unkind person).

Go slow, sure. But i think you can safely dump the prism threads into the extruded aluminum forum.]]> Buback Administration, Announcements, Policy Thu, 20 Mar 2014 16:40:32 -0400 https://reprap.org/forum/read.php?33,327342,327752#msg-327752 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,327752#msg-327752
Quote
Buback
I'd actually love to see a powder reprap
You've probably heard about these projects already, but just in case: OpenSLS, Pwdr Model 0.1, Dragonator 3DP printer]]> MattMoses Administration, Announcements, Policy Thu, 20 Mar 2014 16:17:25 -0400 https://reprap.org/forum/read.php?33,327342,327745#msg-327745 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,327745#msg-327745
Quote
Sublime
If you look at the current designs they are actually going away from that. Most of them use fancy lead screws and extruded aluminum and special v-slides etc. The only machines that have been designed lately that I would consider closer to the original goal would be the work of Nicolas Seward but those are not the ones being promoted by the homepage of RepRap or IRC which promote those that use less replicating parts then their predecessor. The entire project is going backwards if we keep promoting the designs that are the fastest to manufacture. It should not matter if it takes a day or a year to self replicate if it means you do not need to rely on a corporation to manufacture part of your machine that is not necessary (like lead screws can be replaced with levers or strings or fluid)(Or frames that can be printed).

Yes! exactly what i'm saying! we do see eye to eye, you know.

and re: random mutations. yes, mutations happen all the time, but a gene that makes a plant drought tolerant isn't passed down preferential unless there's a drought. Just like why "replicable" is not currently as important as "cheap." It's also why people pick FDM over powder printers; They work for what the user needs, and there's no forcing mechanism that would make switching beneficial (in fact, it's the opposite, as you'd have to invest a lot more time and money doing all the research and sourcing yourself). There's also the patents, so the support business actually have a disincentive while the patents are still in place.

I'd actually love to see a powder reprap, and i think choosing or designing a "seed" printer, just like Darwin, would help spur development.

Re: spacexula. He last posted on the forums 10 months ago. I don't know if he's active elsewhere, but it looks he might have moved on. that sucks.]]> Buback Administration, Announcements, Policy Thu, 20 Mar 2014 16:00:26 -0400 https://reprap.org/forum/read.php?33,327342,327739#msg-327739 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,327739#msg-327739
Quote
Buback
I would like to see the reprap project as enforcing specific forcing mechanisms
Why not encourage instead of enforce? If you have a vision you think people will rally behind, create a project page on the wiki, set up a bounty, get people to put money on it, and then don't shut up about it until someone does the work. :) All the things you mention, "reproducible part count, and cost, and ease of use" could be itemized as action items on the bounty tracker... Heck, there's an open $50 bounty right now for an ease of use development.

Quote
Sublime
Right now the cover page of the wiki has a link to this page [reprap.org] which can only be edited by a few privileged persons who are basically using it as an AD for their machines.
Maybe for full disclosure you should also mention that the cover page of the wiki has a link to this page RepRap Options, and one of the machines on that page is this one and one of the dedicated subforums on this website is this one. It doesn't seem like you are being deprived of publicity... ;)

I don't know how many people remember the last time there was discussion about updating the official machines page, but it didn't go well. Here is what the hard-working volunteer had to say about it after trying to come up with a reasonable solution:
Quote
spacexula
I got enough nasty emails and conversations questioning my character that I am really not intersted in continuing the update of the front page any further. If someone else wants to take up the project have at it. I am done.

Quote
Sublime
If IRC is not an official place I think it should be removed from the Forum heading, if it s an official place it should not have AD's in its header.
A lot of people on IRC think that IRC is the official seat of RepRap. I suggested we put the IRC button up at the top of the forums in an attempt to foster more interaction between the two (largely separate) groups. (The wiki has had a link to IRC in the sidebar since forever.)

Quote
Sublime
If you look at the current designs they are actually going away from that. Most of them use fancy lead screws and extruded aluminum and special v-slides etc. The only machines that have been designed lately that I would consider closer to the original goal would be the work of Nicolas Seward but those are not the ones being promoted by the homepage of RepRap or IRC which promote those that use less replicating parts then their predecessor. The entire project is going backwards if we keep promoting the designs that are the fastest to manufacture. It should not matter if it takes a day or a year to self replicate if it means you do not need to rely on a corporation to manufacture part of your machine that is not necessary (like lead screws can be replaced with levers or strings or fluid)(Or frames that can be printed).
I agree completely. But I think that if reprap ignores the trends of more conventional low-cost 3d printing, it will lose even more relevance. The commercial side of things is not going to go away, and I think people who care about the future of RepRap should acknowledge that. But I also think we can strike a balance between the mundane commercial work going on and cutting edge research into new fabrication methods, self-replication, and so on. We gotta be realistic. :)]]> MattMoses Administration, Announcements, Policy Thu, 20 Mar 2014 15:40:03 -0400 https://reprap.org/forum/read.php?33,327342,327712#msg-327712 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,327712#msg-327712
Quote
Buback
Quote
Sublime
RepRap itself is nothing more than an idea and a place for people to work together.

that sentiment exactly why nobody bothers with the wiki.

I think the reason nobody bothers is because it is an unorganized mess with pages that try and organize things but actually make it worse since they need to be manually updated every time. Like I said in the other thread it needs to be self organizing with the tags making the index pages, not a page that each person has to add a link to and then they fight over which ones is at the top and it becomes a place of opinion and no longer a place full of facts. Try opening an encyclopedia some time and see if there are general pages trying to influence your opinion, you won't find any. It is made up of pages with facts and it is up to the reader to read through all the facts and make an informed decision. Right now there are all kinds of pages trying to make decisions for people and stifling innovation.

Quote
Buback
If you want to stick with the evolutionary metaphor, consider this; there needs to be some type of forcing mechanism in order to promote one mutation over another. Otherwise, you just get random, unproductive mutations. I would like to see the reprap project as enforcing specific forcing mechanisms, such as reproducible part count, and cost, and ease of use. Designating a machine that meets those criteria best would, in my opinion, spur other developers to beat that machine. I don't think that hinders development at all.

That is the user base. If users use your design it continues to live. If they do not it dies off. Also Random mutation is what makes evolution work so you definitely do not want that to stop. It sounds more like you want work on a single type of machine which is fine but that should not restrict others from mutating and creating a new species that lives in the same environment. Some of the earliest threads in the forum are about Resin and Powder printers, are you saying they should not exist? In my opinion RepRap should definitely have one criteria and that is being "Rep"licating. Like this page says [reprap.org] as much of it that can be produced with the current technology.

If you look at the current designs they are actually going away from that. Most of them use fancy lead screws and extruded aluminum and special v-slides etc. The only machines that have been designed lately that I would consider closer to the original goal would be the work of Nicolas Seward but those are not the ones being promoted by the homepage of RepRap or IRC which promote those that use less replicating parts then their predecessor. The entire project is going backwards if we keep promoting the designs that are the fastest to manufacture. It should not matter if it takes a day or a year to self replicate if it means you do not need to rely on a corporation to manufacture part of your machine that is not necessary (like lead screws can be replaced with levers or strings or fluid)(Or frames that can be printed).]]> Sublime Administration, Announcements, Policy Thu, 20 Mar 2014 14:58:21 -0400 https://reprap.org/forum/read.php?33,327342,327699#msg-327699 Re: Forum reorganization https://reprap.org/forum/read.php?33,327342,327699#msg-327699
Quote
Sublime
RepRap itself is nothing more than an idea and a place for people to work together.

that sentiment exactly why nobody bothers with the wiki.

If you want to stick with the evolutionary metaphor, consider this; there needs to be some type of forcing mechanism in order to promote one mutation over another. Otherwise, you just get random, unproductive mutations. I would like to see the reprap project as enforcing specific forcing mechanisms, such as reproducible part count, and cost, and ease of use. Designating a machine that meets those criteria best would, in my opinion, spur other developers to beat that machine. I don't think that hinders development at all.

it's not about selecting a "best" printer, but about selecting the one that best meets Reprap.orgs mission goals. Other companies or individuals will have their own goals.]]> Buback Administration, Announcements, Policy Thu, 20 Mar 2014 14:34:59 -0400