I'm thinking about adding an extra extruder to my Ormerod. The end-goal is to be able to print support-material in HIPS and use chemicals to dissolve it. Does anyone know where to get the small special parts? I'm still missing specs and sources for the PFTE fittings and the hobbed insert. The hot-end (nozzle, brass-nut, heater, thermistor and alu-blocks) seems to be available, although I have to do a little more digging. PFTE-tube, stepper motor, Duet extension board and printed parts are no problem. If possible, I would of course like to just buy a kit with all-inclusive. Anyone knows of such a kit that can be used with the Ormerod? I would be happy to post my findings, when I have something to show. Thank you. Best regards, Carsten https://reprap.org/forum/read.php?340,316725,316725#msg-316725 Wed, 07 Oct 2026 21:11:41 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?340,316725,316974#msg-316974 https://reprap.org/forum/read.php?340,316725,316974#msg-316974
It looks like emakershop actually has the small parts. I don't know why my Googling didn't come up with this shop.

Otherwise I'll try emailing the reprap support directly.

Best regards,

Carsten]]> colsenfoto Ormerod Thu, 27 Feb 2014 10:38:14 -0500 https://reprap.org/forum/read.php?340,316725,316828#msg-316828 https://reprap.org/forum/read.php?340,316725,316828#msg-316828 "support AT reprappro DOT com" or "info AT ........", they are most helpful.]]> Treth Ormerod Thu, 27 Feb 2014 06:51:31 -0500 https://reprap.org/forum/read.php?340,316725,316791#msg-316791 https://reprap.org/forum/read.php?340,316725,316791#msg-316791 Did you try
[reprappro.com]
and / or
[www.emakershop.com]]]> auser Ormerod Thu, 27 Feb 2014 05:47:04 -0500 https://reprap.org/forum/read.php?340,316725,316725#msg-316725 https://reprap.org/forum/read.php?340,316725,316725#msg-316725 The end-goal is to be able to print support-material in HIPS and use chemicals to dissolve it.

Does anyone know where to get the small special parts?

I'm still missing specs and sources for the PFTE fittings and the hobbed insert.
The hot-end (nozzle, brass-nut, heater, thermistor and alu-blocks) seems to be available, although I have to do a little more digging.
PFTE-tube, stepper motor, Duet extension board and printed parts are no problem.

If possible, I would of course like to just buy a kit with all-inclusive.
Anyone knows of such a kit that can be used with the Ormerod?

I would be happy to post my findings, when I have something to show.

Thank you.

Best regards,

Carsten]]> colsenfoto Ormerod Thu, 27 Feb 2014 02:37:48 -0500