New RepRapFirmware release 1.09r-dc42

Re: New RepRapFirmware release 1.09r-dc42

chrishamm — Mon, 07 Mar 2016 07:01:56 -0500

Yes, that's the cold extrusion prevention. You can turn it off in RRF by sending M302 P1, but I don't think it's possible to modify this value (yet) unless you recompile the firmware.

Re: New RepRapFirmware release 1.09r-dc42

Sardi — Mon, 07 Mar 2016 06:49:42 -0500

I noticed that when the hot end gets the temperature as low as 160C the extruder stops extruding.
Is there a way to lower this temperature setting cause I have some filament that can print at temp at 160C, so now I keep it at 161C.
I know its not a big difference +/-1C but I would like not to be only 1C away from the temp that extruder stops working at.

Re: New RepRapFirmware release 1.09r-dc42

dc42 — Fri, 04 Mar 2016 15:53:18 -0500

Yes, version 1.09r includes the fixes for ADC channel crosstalk on the Duet 0.8.5.

Re: New RepRapFirmware release 1.09r-dc42

IMBoring25 — Fri, 04 Mar 2016 12:38:45 -0500

Does this still have the tweaks for the ADC crosstalk that were in the earlier alphas? I got the first Duex4 extruder wired up and it was requiring some very aggressive ADC compensation that was also affecting all the other temperatures.

Re: New RepRapFirmware release 1.09r-dc42

dc42 — Mon, 29 Feb 2016 03:47:22 -0500

See my response in the other thread.

Re: New RepRapFirmware release 1.09r-dc42

Mak64 — Mon, 29 Feb 2016 03:01:47 -0500

Quote
dc42
As far as I know, Upload & Print has never erased the files afterwards.

The version html / js 1.03 , with the button "Upload & Print Drop/Click", print and after delete.
To not delete the files on the SD you had to use the button "SD Upload Drop".
It was convenient to print "disposable."

Re: New RepRapFirmware release 1.09r-dc42

dc42 — Sun, 28 Feb 2016 14:49:23 -0500

Quote
Mak64
Hi,

I have loaded last firm RepRapFirmware-1.09r-dc42 end Web Interface Version: HTML: 1.08, JS: 1.08

with older versions, using the button "Upload & Print" software sent the gcode to sd card, printed it, and later erase it. Now do not erase more .... it is a bug or is there a setting that I did not?

As far as I know, Upload & Print has never erased the files afterwards.

Re: New RepRapFirmware release 1.09r-dc42

Mak64 — Sun, 28 Feb 2016 11:09:02 -0500

Hi,

I have loaded last firm RepRapFirmware-1.09r-dc42 end Web Interface Version: HTML: 1.08, JS: 1.08

with older versions, using the button "Upload & Print" software sent the gcode to sd card, printed it, and later erase it. Now do not erase more .... it is a bug or is there a setting that I did not?

Re: New RepRapFirmware release 1.09r-dc42

Treito — Mon, 25 Jan 2016 02:32:36 -0500

wrong thread

Re: New RepRapFirmware release 1.09r-dc42

Treito — Mon, 25 Jan 2016 02:16:17 -0500

Here is my entry for the config.g

M305 P0 R4700 H0 L0	B3950 T100000.0	; Put your own H and/or L values here to set the bed thermistor ADC correction

Again there are only two allowed parameters for the R-value either 1000 for older boards or 4700 for newer boards. With your settings you will not get any proper readings. I hope you have an infrared thermometer to compare the readings of the Duet. Maybe you should ask for assistance.

Re: New RepRapFirmware release 1.09r-dc42

0x0000 — Sun, 24 Jan 2016 19:27:43 -0500

My heated bed has a 100K thermistor instead of a 10K... can I account for this in software, or will I need to find a proper thermistor? I previously sent this command to change the expected resistance on the board:

M305 P0 R95.5                       ; Set the heated bed thermistor series resistor

To obtain the expected room temperature. R95.5 is pretty close and was determined through trial-and-error, based on the glass thermometer I keep in a glass next to my desk. Is there anything wrong with this approach, or will it cause problems elsewhere?

Re: New RepRapFirmware release 1.09r-dc42

Palobay — Sun, 24 Jan 2016 10:50:52 -0500

Ok. Thanks Darathy.
It's all correct?

; Configuration file for RepRap Ormerod 2
; RepRapPro Ltd
;
; Copy this file to config.g if you have an Ormerod 2
; If you are updating a config.g that you already have you
; may wish to go through it and this file checking what you
; want to keep from your old file.
;
; For G-code definitions, see [reprap.org]
;
M111 S0 ; Debug off
M550 PMy RepRapPro Ormerod 2 ; Machine name (can be anything you like). With DHCP enabled connect to (example) [reprapproormerod2] (machine name with no spaces).
M551 Preprap ; Machine password (currently not used)
M540 P0xBE:0xEF:0xDE:0xAD:0xFE:0xED ; MAC Address
;M552 P0.0.0.0 ; Un-comment for DHCP
M552 P192.168.1.14 ; IP address, comment for DHCP
M553 P255.255.255.0 ; Netmask
M554 P192.168.1.1 ; Gateway, comment for DHCP
M555 P2 ; Set output to look like Marlin
G21 ; Work in millimetres
G90 ; Send absolute corrdinates...
M83 ; ...but relative extruder moves
M906 X800 Y1000 Z800 E800 ; Set motor currents (mA)
M305 P0 R1000 ; Set the heated bed thermistor series resistor to 1K
M305 P1 R1000 ; Set the hot end thermistor series resistor to 1K
M569 P0 S0 ; Set X axis direction
M92 E420 ; Set extruder steps per mm
M558 P2 ; Use a modulated Z probe
G31 Z0.8 P600 ; Set the probe height and threshold (deliberately too high to avoid bed crashes on initial setup)
M556 S75 X0 Y0 Z0 ; Put your axis compensation here
M201 X500 Y500 Z15 E500 ; Accelerations (mm/s^2)
M203 X15000 Y15000 Z100 E3600 ; Maximum speeds (mm/min)
M566 X200 Y200 Z30 E20 ; Minimum speeds mm/minute
M563 P0 D0 H1 ; Define tool 0
G10 P0 S-273 R-273 ; Set tool 0 operating and standby temperatures
;M563 P1 D1 H2 ; Define tool 1, uncomment if you have a dual colour upgrade
;G10 P1 X19 S-273 R-273 ; Set tool 1 operating and standby temperatures, uncomment if you have a dual colour upgrade

The other doubt is...

I send "M105" command and the response is:

ok T: B:21.6 H0:21.6/-273.1 H1:20.8/-273.0

Temperature of the room is about 22°C. It's all ok to go over and connect with Pronterface?

Re: New RepRapFirmware release 1.09r-dc42

Darathy — Sun, 24 Jan 2016 10:37:54 -0500

Change the R4700 to R1000 and remove the ;before the M305

Re: New RepRapFirmware release 1.09r-dc42

Palobay — Sun, 24 Jan 2016 10:05:48 -0500

Hi,
I have an Ormerod 2 and I made the upgrade of the firmware for the first time. Passing from v0.78 to v1.9. I used Arduino IDE 1.6.1.
I made passages in right mode and I've upgraded it.

Now I'm setting config.g .
My Duet is a 1K board (R19 and R21 resistors report "102" on the top).
I'm reading "Setting the temperature for you your board" on Commissioning page, but don't know how do I do.
In the config.g file the values are:

;M305 P0 R4700 ; Set the heated bed thermistor series resistor to 4K7
;M305 P1 R4700 ; Set the hot end thermistor series resistor to 4K7

What do I do?

Re: New RepRapFirmware release 1.09r-dc42

rjmusto — Sun, 24 Jan 2016 06:45:48 -0500

Added a pice of white card and working fine again. It has been ok for months and just decided to cause trouble coincident with the firmware upgrade - typical curved ball!

Re: New RepRapFirmware release 1.09r-dc42

Treito — Sun, 24 Jan 2016 00:19:25 -0500

I have/ had with both printers that problem. I do not know why this happened exactly. At least I had to exchange the x-carriage maybe this is the cause. The original x-carriage including the original sensor board (3pin MK1 and 4-pin MK2) does not reach the trigger point. For my MK2 I temporarily added a small piece of white paper (white label). It does not look good and it is not very precisely, but it works. It looks like that the sensor is too close in x-arm-direction. The sensor hits the diagonal of the trigger area instead the horizontal.
For my MK1 I added this nice one by dc42:
[github.com]

This will be added to my MK2, too.

Re: New RepRapFirmware release 1.09r-dc42

dc42 — Sat, 23 Jan 2016 18:38:20 -0500

Your previous config.g file and homing files should still work. If the gap between the homing tab and the proximity sensor is too large to give reliable homing, then gluing a small piece of white card on top to raise it a little may help.

Re: New RepRapFirmware release 1.09r-dc42

rjmusto — Sat, 23 Jan 2016 15:38:09 -0500

Another quick question: the x-axis homing is now hitting the endstops (and yes the white paper is still there on the stub). Are there any other SD Card files that need updating for 1.09r perhaps?
Thanks.

Re: New RepRapFirmware release 1.09r-dc42

dougal1957 — Sat, 23 Jan 2016 10:57:32 -0500

Quote
rjmusto
Ah. I have 1.06.

How do I update that part?

Update:

It's ok, I got it. Copied over the latest www folder from Github and now have 1.08 installed. All good now.

Thanks for the help.

Glad I could be of limited Help (Not an Expert yet)

Re: New RepRapFirmware release 1.09r-dc42

rjmusto — Sat, 23 Jan 2016 09:18:59 -0500

Ah. I have 1.06.

How do I update that part?

Update:

It's ok, I got it. Copied over the latest www folder from Github and now have 1.08 installed. All good now.

Thanks for the help.

Re: New RepRapFirmware release 1.09r-dc42

dougal1957 — Sat, 23 Jan 2016 09:13:14 -0500

Quote
rjmusto
Hi,
Thanks dc42 for the update. I have flashed it today.

Got one problem; there are no temperatures or positions reported via the web interface. I can control the temperatures, but am not getting any reports. Pronterface is showing temperatures ok. And the printer itself seems ok: I have set it off on a simple print and it looks ok.

I've updated the config.g file to the latest one on dc42's SD-image folder, just in case something was out of sync here, but hasn't fixed it.

Any suggestions?

Thanks,
Ralph

What version of Web interface is loaded (Check the settings page) you need either 1.07 or 1.08 for this FW Release.

Re: New RepRapFirmware release 1.09r-dc42

rjmusto — Sat, 23 Jan 2016 08:15:47 -0500

Hi,
Thanks dc42 for the update. I have flashed it today.

Got one problem; there are no temperatures or positions reported via the web interface. I can control the temperatures, but am not getting any reports. Pronterface is showing temperatures ok. And the printer itself seems ok: I have set it off on a simple print and it looks ok.

I've updated the config.g file to the latest one on dc42's SD-image folder, just in case something was out of sync here, but hasn't fixed it.

Any suggestions?

Thanks,
Ralph

Re: New RepRapFirmware release 1.09r-dc42

gdwinslow — Thu, 21 Jan 2016 21:50:46 -0500

Config:
; Configuration file for RepRap Ormerod
; RepRapPro Ltd
;
M111 S0 ; Debug on
M550 PTricolour Mendel
M551 Pgdww1620
M540 P0xBE:0xEF:0xDE:0xAD:0xFE:0xED ; Set the MAC address
M552 P192.168.1.55
M553 P255.255.255.0
M554 P192.168.1.254
M555 P2 ; Set output to look like Marlin
G21 ; Work in mm
G90 ; Absolute positioning
M83 ; Extrusions relative
M906 X800 Y1000 Z800 E800:800:800:800:800 ; Motor currents (mA)
M569 P0 S1 ; Set X Axis Direction
M569 P1 S0 ; Set Y Axis Direction
M570 S180 ; Set heater timeout
M301 H1 P10.00 I0.050 D200.00 T0.40 S0.90 W180.0 B30.0 ; 14V PID Scaling
;
M563 P0 D0 H1 ; Create tool 0 = Color 1
M563 P1 D1 H1 ; Create tool 1 = Color 2
M563 P2 D2 H1 ; Create tool 2 = Color 3
M563 P3 D3 H1 ; Create tool 3 = Color 4
M563 P4 D4 H1 ; Create tool 4 = Temperature for this tool should be Set Low
G10 P0 X0.0 Y0.0 Z0.0 S0 R0 ; Set tool 0 operating and standby temperatures
G10 P1 X0.0 Y0.0 Z0.0 S0 R0 ; Set tool 1 operating and standby temperatures
G10 P2 X0.0 Y0.0 Z0.0 S0 R0 ; Set tool 2 operating and standby temperatures
G10 P3 X0.0 Y0.0 Z0.0 S0 R0 ; Set tool 3 operating and standby temperatures
G10 P4 X0.0 Y0.0 Z0.0 S0 R0 ; Set tool 4 operating and standby temperatures
M92 X100.25 Y100.25 Z4001.50 E420.00 ; Set axis steps per unit
;
M558 P2 ; Use a modulated Z probe
G31 P200 Z0.80 ; Set the probe height and threshold PLA = 0.96, ABS = 0.96
T4
;
; Set Axis compensation
;
M561
M557 P0 X0 Y35 ; X30 Y30 Four...
M557 P1 X0 Y175 ; X30 Y170 ...probe points...
M557 P2 X140 Y175 ; X170 Y170 ...for bed...
M557 P3 X140 Y35 ; X170 Y30 ...levelling
M556 S78 X0.00 Y0.-30 Z-0.45 ; Put your axis compensation here X0.00 Y0.75 Z0.00
;
M201 X800 Y800 Z15 E1000 ; acceleration tweaks for improved finish
M203 X15000 Y15000 Z150 E3600 ; speed tweaks for improved finish
;
M574 X2 Y2 Z1 S1 ; set end stop configuration
M208 X200 Y200 Z100 ; set axis max travel
M208 X0.0 Y0.0 S1 ; set axis minimum (adjust to make X=0 the edge of the bed)

Actual End stop Location:
X = 10mm from stop optical flag
Y = On end Stop SW
Z = not yet homed

Note - I did change this M558 P1 back to M558 P2

M119
Endstops - X: at max stop, Y: at max stop, Z: at min stop, Z probe: not stopped

Re: New RepRapFirmware release 1.09r-dc42

dc42 — Thu, 21 Jan 2016 14:49:32 -0500

kparp1, my question about the proximity sensor was addressed to gdwinslow See my earlier reply to your question. However, if your Ormerod was shipped in October 2015 then it has a 4-wire modulated sensor, and you should use P2 in the M558 command.

Re: New RepRapFirmware release 1.09r-dc42

kpapr1 — Thu, 21 Jan 2016 11:15:37 -0500

This is my config.g file

; Ormerod 2 config file for dc42 Duet firmware
M111 S0 ; Debug off
M550 Pormerod2 ; Machine name (can be anything you like). With DHCP enabled connect to (example) [reprapproormerod2] (machine name with no spaces).
M551 Preprap ; Machine password (currently not used)
M540 P0xBE:0xEF:0xDE:0xAD:0xFE:0xED ; MAC Address
;M552 P0.0.0.0 ; Un-comment for DHCP
M552 P192.168.1.14 ; IP address, comment for DHCP
M553 P255.255.255.0 ; Netmask
M554 P192.168.1.1 ; Gateway, comment for DHCP
M555 P2 ; Set output to look like Marlin
M575 P1 B57600 S1 ; Comms parameters for PanelDue

G21 ; Work in millimetres
G90 ; Send absolute coordinates...
M83 ; ...but relative extruder moves
M574 X0 Y1 Z0 S1 ; set endstop configuration (Y endstop only, at low end, active high)
M906 X800 Y1000 Z800 E900 ; Set motor currents (mA)
M563 P0 D0 H1 ; Define tool 0
G10 P0 S-273 R-273 ; Set tool 0 operating and standby temperatures
M92 E431 ; Set extruder steps per mm (single nozzle)

M558 P1 ; Use a simple modulated Z probe (change to P1 for an intelligent Z probe)
G31 Z1.0 P606 ; Set the probe height and threshold (put your own values here)

;*** If you have a Duet board with 4.7K thermistor series resistors, change R1000 to R4700 to the following M305 commands
M305 P0 R4700 ; Put your own H and/or L values here to set the bed thermistor ADC correction
M305 P1 R4700 ; Put your own H and/or L values here to set the first nozzle thermistor ADC correction

;*** Adjust the XY coordinates in the following M557 commands to suit your build and the position of the IR sensor

M557 P0 X65 Y5 ; Four
M557 P1 X229 Y5 ; probe points
M557 P2 X229 Y188 ; for bed
M557 P3 X65 Y188 ; levelling

;*** if you are using axis compensation, put the figures in the following command

M556 S75 X0 Y0 Z0 ; Axis compensation here
M201 X500 Y500 Z15 E500 ; Accelerations (mm/s^2)
M203 X15000 Y15000 Z100 E3600 ; Maximum speeds (mm/min)
M566 X200 Y200 Z30 E20 ; Minimum speeds mm/minute

;M208 X216 Y214 ; set axis maxima (adjust to suit your machine)
M208 X-10 Y-7 S1 ; set axis minimum (adjust to make X=0 the edge of the bed)

T0 ; select first hot end

Regarding the proximity sensor I have the stock one RRP sent me in October 2015.

Re: New RepRapFirmware release 1.09r-dc42

dc42 — Wed, 20 Jan 2016 18:11:21 -0500

Which type of proximity sensor do you have, and what configurations commands do you have for it in config.g?

Re: New RepRapFirmware release 1.09r-dc42

gdwinslow — Wed, 20 Jan 2016 18:01:36 -0500

Proximate Sen-sore always triggered = not working

Re: New RepRapFirmware release 1.09r-dc42

dc42 — Wed, 20 Jan 2016 14:56:55 -0500

Quote
kpapr1
Are there any changes needed in the config.g going from dc42m to dc42r ?

No, unless you have a Duet 0.8.5 and you are already using the FAN 1 connector for something.

Re: New RepRapFirmware release 1.09r-dc42

kpapr1 — Wed, 20 Jan 2016 08:54:23 -0500

Are there any changes needed in the config.g going from dc42m to dc42r ?

Re: New RepRapFirmware release 1.09r-dc42

dc42 — Tue, 19 Jan 2016 17:45:35 -0500

Please explain what you mean by not working. If the board is totally unresponsive, the usual reason is that you downloaded the html page describing the binary instead of the binary itself. The size of the downloaded file is a giveaway.