Where did everybody go? MadMike, MarkStephen, Verteez, Cliff? https://reprap.org/forum/read.php?344,395904,395904#msg-395904 Fri, 12 Jun 2026 23:10:34 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?344,395904,398597#msg-398597 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,398597#msg-398597
Quote
Cliff Mellangård
Could you post a link to the stl so will I give you all credit for it on my thing page :)
Or you have a thing page to it I can link to???

The STL file can be found here on my website.

Direct Drive Extruder Body

Print it in PLA at 50% infill or more.
Tap holes for grub screw. Polish end of grub screw so that it isn't sharp anywhere.
All other parts can be purchased online from many places.
40mm fan, 40mm heatsink, NEMA17 stepper, Drive Cog.




]]> regpye Smart_Rap Sun, 24 Aug 2014 15:01:39 -0400 https://reprap.org/forum/read.php?344,395904,398453#msg-398453 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,398453#msg-398453 Or you have a thing page to it I can link to???]]> Cliff Mellangård Smart_Rap Sun, 24 Aug 2014 05:53:43 -0400 https://reprap.org/forum/read.php?344,395904,398388#msg-398388 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,398388#msg-398388
Quote
Cliff Mellangård
The train is rolling now :)
[www.thingiverse.com]

I like it Cliff.

I have a design for the direct drive extruder that you are using that can be printed out in PLA if you want it.
Same design as you are getting from China, but you can make your own easier and cheaper.
All other parts can be sourced cheaply from ebay, aliexpress or many other places. Only one part to print out.
Drive wheel I made myself too, cheap.
I had a lot of success with it before I changed over to geared type extruders.


This photo is of the direct drive that I was making several years ago, it worked quite well for the money it cost to make and was light too.




Here is another shot of the same extruder type. I used a metal mounting plate that has two knurled nuts to quick release it from the carriage. It made working on the extruder very easy to do and convenient as well. The Knurled nuts I printed (in green) and they have a captive nut inside.





Here are two used together for a Bowden setup.
]]> regpye Smart_Rap Sat, 23 Aug 2014 22:41:30 -0400 https://reprap.org/forum/read.php?344,395904,398063#msg-398063 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,398063#msg-398063 [www.thingiverse.com]]]> Cliff Mellangård Smart_Rap Sat, 23 Aug 2014 02:13:29 -0400 https://reprap.org/forum/read.php?344,395904,398022#msg-398022 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,398022#msg-398022
Maybe you should ask one of the Admins how to enter it to the wiki.
[reprap.org]]]> BackEMF Smart_Rap Fri, 22 Aug 2014 20:36:52 -0400 https://reprap.org/forum/read.php?344,395904,397914#msg-397914 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,397914#msg-397914 It uses the same logic and design of the smartrap but more to the Wallace and prinrbot design.
Its almost ready for release now and hangaround the reprap facebook group nowdays :)


Who should I contact to get it entered to the reprap wiki and forum ????
]]> Cliff Mellangård Smart_Rap Fri, 22 Aug 2014 14:35:13 -0400 https://reprap.org/forum/read.php?344,395904,396968#msg-396968 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,396968#msg-396968
I also experimented with proximity sensor I like the accuracy of the detection, but you really need a metal bed and it also adds more weight to the X axis. The sensor i have is as big as a hotend and smaller ones are exponentially more expensive. So that still puts me off a bit.

It's good to get the most out of this before you start V2 and have a final design for V1

All the things i learned on my smartap journey are to much to remember. This trip had a lot of value!
And i've learned most form my own mistakes haha!

Viva la SmartRap!]]> BackEMF Smart_Rap Wed, 20 Aug 2014 02:29:18 -0400 https://reprap.org/forum/read.php?344,395904,396939#msg-396939 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,396939#msg-396939
You're right, I should do that with a standard connection, so everyone can design an adaptable support like duranza did with his end. I see I have 3 jhead type at home and three different sizes for the support :)

updates are really just some tries to make it more easy to build (as always) and more stiff. I'm working on something to make the Z rods more stable , and adjustable , for cases where we are not very orthogonal..

in the pipe :
- standard optical end stops for X Y
- proximity sensor for autolevel ( i got one an it works great ! ) . that will let us re-do the head fixed.

after that , we start to have a solid model.. so we can think about V2 :) the goal is to have a different frame , printed , and minimum change from actual parts (no printed) for people to easy try and upgrade without buying too much stuff .. not easy , hu ?]]> smartfriendz Smart_Rap Wed, 20 Aug 2014 01:08:54 -0400 https://reprap.org/forum/read.php?344,395904,396893#msg-396893 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,396893#msg-396893 Why not simply use a 'blank' end on the x axis with 2 mountholes so that whatever type of hotend can be mounted. (or a plotter pen or any other kind of head)

This separates the basic frame design so then you don't have to redesign the the hotend mount, and everyone can just give you files for whatever they mount to the smartrap.

I'm currently busy with the ATX PCB once i have that sorted then i have to checkout all your updates. Looking forward to that!]]> BackEMF Smart_Rap Tue, 19 Aug 2014 19:05:36 -0400 https://reprap.org/forum/read.php?344,395904,396602#msg-396602 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,396602#msg-396602
On my side, i'm about to update thingiverse and github files :

- new default jhead lite ( for now) . We're dealing with regpye to integrate his heads , which are very good of course. maybe two options ? I like also to have different options for people.

- new lm6 clamps in case the hard-to-adjust lm6 holders are printed too big. Those clamps are just snapped and maintain the guides quiet good.

- some little changes to make life easier and try to reduce num of screws.

for some weeks or months now i'm updating the same model until it works really good . Smartrap v2 will come later :)]]> smartfriendz Smart_Rap Tue, 19 Aug 2014 03:47:24 -0400 https://reprap.org/forum/read.php?344,395904,396515#msg-396515 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,396515#msg-396515
Haha Christian what about designing a Quechua style rap. That fits in a back pack just shake it out of the backpack and it springs up in a workable machine. POOF! (maybe iv'e watched to much sci-fi?)
I now have a future vision of people on a beach and repraps that build the sand castles.... (all solar and wind powered etc) :-D

That PVC SnapRap sounds very interesting CellJeffe! :-D

Sidetracks kinda grow easy in this tech field. I'm currently on the FreeCAD rollercoaster. And those video's helped me many times already Mark.]]> BackEMF Smart_Rap Mon, 18 Aug 2014 19:21:24 -0400 https://reprap.org/forum/read.php?344,395904,396473#msg-396473 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,396473#msg-396473
Should have a new mod to the dual hot end setup. The old hotend retainer mount was / is a bit weak, but i think I have a plan to fix it right up

Mark]]> markstephen Smart_Rap Mon, 18 Aug 2014 16:25:28 -0400 https://reprap.org/forum/read.php?344,395904,396362#msg-396362 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,396362#msg-396362
But I just fired up my SmartRap today to test out some new ideas for the PVC SnapRap.

Hmm, Judging by the groans, my SnapRap needs regreasing after three weeks idle.]]> CellJeffe Smart_Rap Mon, 18 Aug 2014 10:57:11 -0400 https://reprap.org/forum/read.php?344,395904,396237#msg-396237 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,396237#msg-396237
Quote
BackEMF
I also expected people to reprap during the holidays

If only low cost airlines allowed 3 more kilograms of baggage weight, I'd have my smartrap with me!]]> cristian Smart_Rap Mon, 18 Aug 2014 06:29:45 -0400 https://reprap.org/forum/read.php?344,395904,396120#msg-396120 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,396120#msg-396120 I hope they all had a good one.]]> BackEMF Smart_Rap Sun, 17 Aug 2014 20:40:44 -0400 https://reprap.org/forum/read.php?344,395904,396061#msg-396061 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,396061#msg-396061
Quote
BackEMF
MadMike, MarkStephen, Verteez, Cliff?

I am here as usual.]]> regpye Smart_Rap Sun, 17 Aug 2014 16:48:33 -0400 https://reprap.org/forum/read.php?344,395904,396015#msg-396015 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,396015#msg-396015
I'm sure it will restart soon :)

I will have some updates to do on my side too.]]> smartfriendz Smart_Rap Sun, 17 Aug 2014 13:45:15 -0400 https://reprap.org/forum/read.php?344,395904,396014#msg-396014 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,396014#msg-396014 cristian Smart_Rap Sun, 17 Aug 2014 13:37:31 -0400 https://reprap.org/forum/read.php?344,395904,395973#msg-395973 Re: Where did everybody go? https://reprap.org/forum/read.php?344,395904,395973#msg-395973 duranza Smart_Rap Sun, 17 Aug 2014 11:49:44 -0400 https://reprap.org/forum/read.php?344,395904,395904#msg-395904 Where did everybody go? https://reprap.org/forum/read.php?344,395904,395904#msg-395904 BackEMF Smart_Rap Sun, 17 Aug 2014 08:06:26 -0400