PLA bushing? I was thinking... Is good idea replace at least the X and Y linear bushing by others printed in PLA? I will print my parts in ABS, but maybe make the bushings in PLA, cheaper and less noisy... Like to hear your ideas... Still don't worked with PLA... https://reprap.org/forum/read.php?344,513922,513922#msg-513922 Sun, 09 Aug 2026 09:48:27 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?344,513922,514157#msg-514157 Re: PLA bushing? https://reprap.org/forum/read.php?344,513922,514157#msg-514157
Maybe someone that uses, can give us an idea... normal lm8uu have to ve replaced, oiled and make noise... i'm not happy with it on my prusa i3 xD, but prefer to not make more mods... now after a few months starting good print quality at low speeds...]]> CeledaBcn Smart_Rap Wed, 27 May 2015 04:06:21 -0400 https://reprap.org/forum/read.php?344,513922,514061#msg-514061 Re: PLA bushing? https://reprap.org/forum/read.php?344,513922,514061#msg-514061 n.glasson Smart_Rap Tue, 26 May 2015 21:35:52 -0400 https://reprap.org/forum/read.php?344,513922,514055#msg-514055 Re: PLA bushing? https://reprap.org/forum/read.php?344,513922,514055#msg-514055 cristian Smart_Rap Tue, 26 May 2015 21:04:08 -0400 https://reprap.org/forum/read.php?344,513922,513999#msg-513999 Re: PLA bushing? https://reprap.org/forum/read.php?344,513922,513999#msg-513999
@rcjoseb I'm following your improvements ;-)]]> CeledaBcn Smart_Rap Tue, 26 May 2015 17:41:18 -0400 https://reprap.org/forum/read.php?344,513922,513949#msg-513949 Re: PLA bushing? https://reprap.org/forum/read.php?344,513922,513949#msg-513949 rcjoseb Smart_Rap Tue, 26 May 2015 15:37:06 -0400 https://reprap.org/forum/read.php?344,513922,513929#msg-513929 Re: PLA bushing? https://reprap.org/forum/read.php?344,513922,513929#msg-513929
http://reprap.org/wiki/PLA_bushings

and more on google.

I wonder how long they last, though...]]> cristian Smart_Rap Tue, 26 May 2015 14:43:18 -0400 https://reprap.org/forum/read.php?344,513922,513922#msg-513922 PLA bushing? https://reprap.org/forum/read.php?344,513922,513922#msg-513922
Is good idea replace at least the X and Y linear bushing by others printed in PLA?

I will print my parts in ABS, but maybe make the bushings in PLA, cheaper and less noisy...

Like to hear your ideas...

Still don't worked with PLA...]]> CeledaBcn Smart_Rap Tue, 26 May 2015 14:29:28 -0400