Ciao a tutti. Sto cercando di configurare il firmware Mk4duo per la mia Core XY ma ho un problema che non riesco a risolvere. Volevo inserire nel menù dello schermo LCD la funzione per fare il classico bed leveling manuale (posizionamento dell'estrusore ai 4 angoli + al centro e regolazione sulle viti che sostengono il piatto), ma non riesco ad attivarlo. Nel configuratore online ho spuntato la casella "Z probe manually" ma non compare nulla sull'LCD. Allora ho pure spuntato "Enable LCD Bed Level (Requires MESH BED LEVELING or PROBE MANUALLY and LCD)" ma Arduino IDE mi da errore di compilazione ... Ovviamente nel configuratore ho inserito il giusto LCD che utilizzo. Qualcuno può aiutarmi? Ho provato a decommentare alcune voci ma non ha funzionato. Grazie https://reprap.org/forum/read.php?361,815140,815140#msg-815140 Fri, 17 Apr 2026 08:48:23 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?361,815140,815770#msg-815770 https://reprap.org/forum/read.php?361,815140,815770#msg-815770 MagoKimbra GCODE, Software e Firmware Sat, 24 Mar 2018 05:41:58 -0400 https://reprap.org/forum/read.php?361,815140,815768#msg-815768 https://reprap.org/forum/read.php?361,815140,815768#msg-815768
Se non ti spiace ho un'altra domanda:

Ho definito tramite il tuo configuratore:
#define X_MAX_POS 214
#define X_MIN_POS -6
#define Y_MAX_POS 196
#define Y_MIN_POS -19
#define Z_MAX_POS 270

In modo che per x=0 ed y=0 sono sul piatto di stampa.

Quelli definiti però, se non sbaglio, sono i travel limits. Cioè quei valori oltre i quali bed ed estrusore (xy) non deve andare perchè sennò sbatte contro la struttura.

Come faccio a dirgli che il bed è lungo 209x185? Si fa solo tramite slicer??

Grazie]]> gek GCODE, Software e Firmware Sat, 24 Mar 2018 05:26:06 -0400 https://reprap.org/forum/read.php?361,815140,815615#msg-815615 https://reprap.org/forum/read.php?361,815140,815615#msg-815615 MagoKimbra GCODE, Software e Firmware Thu, 22 Mar 2018 17:54:06 -0400 https://reprap.org/forum/read.php?361,815140,815602#msg-815602 https://reprap.org/forum/read.php?361,815140,815602#msg-815602
Comunque ora non ci sono più ma mi da questo:

Arduino:1.8.5 (Windows 7), Scheda:"Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

sketch\src\HAL\HAL_AVR\HAL_AVR.cpp:268:1: error: 'HAL_TEMP_TIMER_ISR' does not name a type

HAL_TEMP_TIMER_ISR {

^

exit status 1
Errore durante la compilazione per la scheda Arduino/Genuino Mega or Mega 2560.

Questo report potrebbe essere più ricco di informazioni abilitando l'opzione
"Mostra un output dettagliato durante la compilazione"
in "File -> Impostazioni"]]> gek GCODE, Software e Firmware Thu, 22 Mar 2018 15:50:23 -0400 https://reprap.org/forum/read.php?361,815140,815600#msg-815600 https://reprap.org/forum/read.php?361,815140,815600#msg-815600 MagoKimbra GCODE, Software e Firmware Thu, 22 Mar 2018 15:35:39 -0400 https://reprap.org/forum/read.php?361,815140,815591#msg-815591 https://reprap.org/forum/read.php?361,815140,815591#msg-815591 Warning del compilatore ho Nessuno]]> gek GCODE, Software e Firmware Thu, 22 Mar 2018 14:47:12 -0400 https://reprap.org/forum/read.php?361,815140,815587#msg-815587 https://reprap.org/forum/read.php?361,815140,815587#msg-815587
Sono depresso!!!

disabilita i warning!!! non ce la faccio più a scriverlo...]]> MagoKimbra GCODE, Software e Firmware Thu, 22 Mar 2018 14:15:03 -0400 https://reprap.org/forum/read.php?361,815140,815585#msg-815585 https://reprap.org/forum/read.php?361,815140,815585#msg-815585 gek GCODE, Software e Firmware Thu, 22 Mar 2018 13:54:02 -0400 https://reprap.org/forum/read.php?361,815140,815583#msg-815583 https://reprap.org/forum/read.php?361,815140,815583#msg-815583
In file included from sketch\src/inc/pins.h:28:0,

from sketch\MK4duo.h:111,

from C:\Users\Giacomo\Desktop\MK4duo_21-03-2018_190312\MK4duo\MK4duo.ino:301:

sketch\src/inc/../boards/33.h:249:0: warning: "ORIG_BEEPER_PIN" redefined

#define ORIG_BEEPER_PIN 37

^

sketch\src/inc/../boards/33.h:148:0: note: this is the location of the previous definition

#define ORIG_BEEPER_PIN NoPin

^

sketch\src/inc/../boards/33.h:260:0: warning: "SD_DETECT_PIN" redefined

#define SD_DETECT_PIN 49

^

sketch\src/inc/../boards/33.h:151:0: note: this is the location of the previous definition

#define SD_DETECT_PIN NoPin

^

sketch\src/inc/../boards/33.h:261:0: warning: "KILL_PIN" redefined

#define KILL_PIN 41

^

sketch\src/inc/../boards/33.h:153:0: note: this is the location of the previous definition

#define KILL_PIN NoPin

^

In file included from sketch\src\HAL\../../src/inc/pins.h:28:0,

from sketch\src\HAL\../../MK4duo.h:111,

from sketch\src\HAL\I2cEeprom.cpp:28:

sketch\src\HAL\../../src/inc/../boards/33.h:249:0: warning: "ORIG_BEEPER_PIN" redefined

#define ORIG_BEEPER_PIN 37

^

sketch\src\HAL\../../src/inc/../boards/33.h:148:0: note: this is the location of the previous definition

#define ORIG_BEEPER_PIN NoPin

^

sketch\src\HAL\../../src/inc/../boards/33.h:260:0: warning: "SD_DETECT_PIN" redefined

#define SD_DETECT_PIN 49

^

sketch\src\HAL\../../src/inc/../boards/33.h:151:0: note: this is the location of the previous definition

#define SD_DETECT_PIN NoPin

^

sketch\src\HAL\../../src/inc/../boards/33.h:261:0: warning: "KILL_PIN" redefined

#define KILL_PIN 41

^

sketch\src\HAL\../../src/inc/../boards/33.h:153:0: note: this is the location of the previous definition

#define KILL_PIN NoPin

^

In file included from sketch\src\HAL\../../src/inc/pins.h:28:0,

from sketch\src\HAL\../../MK4duo.h:111,

from sketch\src\HAL\SpiEeprom.cpp:28:

sketch\src\HAL\../../src/inc/../boards/33.h:249:0: warning: "ORIG_BEEPER_PIN" redefined

#define ORIG_BEEPER_PIN 37

^

sketch\src\HAL\../../src/inc/../boards/33.h:148:0: note: this is the location of the previous definition

#define ORIG_BEEPER_PIN NoPin

^

sketch\src\HAL\../../src/inc/../boards/33.h:260:0: warning: "SD_DETECT_PIN" redefined

#define SD_DETECT_PIN 49

^

sketch\src\HAL\../../src/inc/../boards/33.h:151:0: note: this is the location of the previous definition

#define SD_DETECT_PIN NoPin

^

sketch\src\HAL\../../src/inc/../boards/33.h:261:0: warning: "KILL_PIN" redefined

#define KILL_PIN 41

^

sketch\src\HAL\../../src/inc/../boards/33.h:153:0: note: this is the location of the previous definition

#define KILL_PIN NoPin

^

In file included from sketch\src\HAL\HAL_AVR\../../../src/inc/pins.h:28:0,

from sketch\src\HAL\HAL_AVR\../../../MK4duo.h:111,

from sketch\src\HAL\HAL_AVR\HAL_AVR.cpp:57:

sketch\src\HAL\HAL_AVR\../../../src/inc/../boards/33.h:249:0: warning: "ORIG_BEEPER_PIN" redefined

#define ORIG_BEEPER_PIN 37

^

sketch\src\HAL\HAL_AVR\../../../src/inc/../boards/33.h:148:0: note: this is the location of the previous definition

#define ORIG_BEEPER_PIN NoPin

^

sketch\src\HAL\HAL_AVR\../../../src/inc/../boards/33.h:260:0: warning: "SD_DETECT_PIN" redefined

#define SD_DETECT_PIN 49

^

sketch\src\HAL\HAL_AVR\../../../src/inc/../boards/33.h:151:0: note: this is the location of the previous definition

#define SD_DETECT_PIN NoPin

^

sketch\src\HAL\HAL_AVR\../../../src/inc/../boards/33.h:261:0: warning: "KILL_PIN" redefined

#define KILL_PIN 41

^

sketch\src\HAL\HAL_AVR\../../../src/inc/../boards/33.h:153:0: note: this is the location of the previous definition

#define KILL_PIN NoPin

^

sketch\src\HAL\HAL_AVR\HAL_AVR.cpp:268:1: error: 'HAL_TEMP_TIMER_ISR' does not name a type

HAL_TEMP_TIMER_ISR {

^

exit status 1
Errore durante la compilazione per la scheda Arduino/Genuino Mega or Mega 2560.

Questo report potrebbe essere più ricco di informazioni abilitando l'opzione
"Mostra un output dettagliato durante la compilazione"
in "File -> Impostazioni"]]> gek GCODE, Software e Firmware Thu, 22 Mar 2018 13:49:50 -0400 https://reprap.org/forum/read.php?361,815140,815431#msg-815431 https://reprap.org/forum/read.php?361,815140,815431#msg-815431 MagoKimbra GCODE, Software e Firmware Wed, 21 Mar 2018 19:22:20 -0400 https://reprap.org/forum/read.php?361,815140,815396#msg-815396 https://reprap.org/forum/read.php?361,815140,815396#msg-815396 Enable LCD Bed Level (Requires MESH BED LEVELING or PROBE MANUALLY and LCD) ed in Bed level type seleziono Mesh Bed Level quando verifico in Arduino IDE mi da errore di compilazione.]]> gek GCODE, Software e Firmware Wed, 21 Mar 2018 14:11:10 -0400 https://reprap.org/forum/read.php?361,815140,815170#msg-815170 https://reprap.org/forum/read.php?361,815140,815170#msg-815170 Quindi MBL, non probe manually, e LCD bed level.]]> MagoKimbra GCODE, Software e Firmware Tue, 20 Mar 2018 03:22:59 -0400 https://reprap.org/forum/read.php?361,815140,815141#msg-815141 https://reprap.org/forum/read.php?361,815140,815141#msg-815141 gek GCODE, Software e Firmware Mon, 19 Mar 2018 18:15:12 -0400 https://reprap.org/forum/read.php?361,815140,815140#msg-815140 https://reprap.org/forum/read.php?361,815140,815140#msg-815140
Sto cercando di configurare il firmware Mk4duo per la mia Core XY ma ho un problema che non riesco a risolvere.

Volevo inserire nel menù dello schermo LCD la funzione per fare il classico bed leveling manuale (posizionamento dell'estrusore ai 4 angoli + al centro e regolazione sulle viti che sostengono il piatto), ma non riesco ad attivarlo.

Nel configuratore online ho spuntato la casella "Z probe manually" ma non compare nulla sull'LCD. Allora ho pure spuntato "Enable LCD Bed Level (Requires MESH BED LEVELING or PROBE MANUALLY and LCD)" ma Arduino IDE mi da errore di compilazione ...
Ovviamente nel configuratore ho inserito il giusto LCD che utilizzo.

Qualcuno può aiutarmi?
Ho provato a decommentare alcune voci ma non ha funzionato.

Grazie]]> gek GCODE, Software e Firmware Mon, 19 Mar 2018 18:09:35 -0400