Hi, My coreXY is finally printing, but experiencing some shifting that makes the prints essentially unrecognizable. I've attached a picture of the first layer of what should be a calibration cube. It prints the perimeters more or less reasonably (although there is a gap between the top and left lines), but the infill looks totally bizarre as it's shifted away from the square. Any idea what might be causing this? I've successfully managed to print something similar before, but after a bunch of tweaking this is now the result. Thanks in advance. https://reprap.org/forum/read.php?397,746374,746374#msg-746374 Fri, 13 Mar 2026 18:50:41 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?397,746374,746444#msg-746444 https://reprap.org/forum/read.php?397,746374,746444#msg-746444 anvoice CoreXY Machines Tue, 07 Feb 2017 22:38:14 -0500 https://reprap.org/forum/read.php?397,746374,746383#msg-746383 https://reprap.org/forum/read.php?397,746374,746383#msg-746383 the_digital_dentist CoreXY Machines Tue, 07 Feb 2017 17:46:07 -0500 https://reprap.org/forum/read.php?397,746374,746374#msg-746374 https://reprap.org/forum/read.php?397,746374,746374#msg-746374 My coreXY is finally printing, but experiencing some shifting that makes the prints essentially unrecognizable. I've attached a picture of the first layer of what should be a calibration cube. It prints the perimeters more or less reasonably (although there is a gap between the top and left lines), but the infill looks totally bizarre as it's shifted away from the square. Any idea what might be causing this? I've successfully managed to print something similar before, but after a bunch of tweaking this is now the result.
Thanks in advance.]]> anvoice CoreXY Machines Tue, 07 Feb 2017 17:10:30 -0500