Hello, Im a beginner with this whole thing I brought a glider as i knowing little about electronics. sadly it came with a blank usb stick so i downloaded repsnapper and a driver off their website. repsnapper works (minus connect to the printer) and the driver appears to do nothing the issue im having is getting the computer to recognise the printer at all (running xp, java 6) anyway i guess im after list of software i need and where to get it Thanks for your help https://reprap.org/forum/read.php?4,104517,104517#msg-104517 Mon, 08 Jun 2026 13:06:04 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,104517,163868#msg-163868 https://reprap.org/forum/read.php?4,104517,163868#msg-163868 the y axis was the only one that worked fine x was jumpy and z did not move.
every time I companied they sent an email on how to fix it and it did not work.
it toke about 6 months to get a new machine and it had a broken bearing holder with missing bearing.
the new one had a gen 6 board.
but it printed marginally nowhere near the quality they claimed I used repsnaper and that's not the best program to use.
now I am trying to switch to ponterface or repiteire when installed ponterface all axis worked but the extruder did not seem to work.
I played with the extruder settings to speed it up and it worked but when I siced an stl file and tried to print it everything worked fine exept the extruder it did not move and the same thing with repetier can any one help me the thought of printing with repsnaper will drive me crazy.]]> peter s Reprappers Thu, 01 Nov 2012 19:09:30 -0400 https://reprap.org/forum/read.php?4,104517,163829#msg-163829 https://reprap.org/forum/read.php?4,104517,163829#msg-163829 the y axis was the only one that worked fine x was jumpy and z did not move.
every time I companied they sent an email on how to fix it and it did not work.
it toke about 6 months to get a new machine and it had a broken bearing holder with missing bearing.
the new one had a gen 6 board.
but it printed marginally nowhere near the quality they claimed I used repsnaper and that's not the best program to use.
now I am trying to switch to ponterface or repiteire when installed ponterface all axis worked but the extruder did not seem to work.
I played with the extruder settings to speed it up and it worked but when I siced an stl file and tried to print it everything worked fine exept the extruder it did not move and the same thing with repetier can any one help me the thought of printing with repsnaper will drive me crazy.]]> peter s Reprappers Thu, 01 Nov 2012 14:30:12 -0400 https://reprap.org/forum/read.php?4,104517,118957#msg-118957 https://reprap.org/forum/read.php?4,104517,118957#msg-118957 I got to use it for a whole 15 mins before it stopped extruding and then PLA started comming out from further up. Very dissapiointing for a so called out of the box solution.

Bill D]]> TechnoBill Reprappers Thu, 16 Feb 2012 00:10:35 -0500 https://reprap.org/forum/read.php?4,104517,108815#msg-108815 https://reprap.org/forum/read.php?4,104517,108815#msg-108815
I too have a botmill glider and have it up and running with perfect prints.
But I did had to do some major adjustments.

I will guide through all the steps I took:

FIRST: Driver
You need to install the driver first before attaching your printer. I've attached it to this message (3 parts)

THEN: Slice Software
I use pronterface(in combination with skeinforge) to do my prints I would highly recommend you to do the same.
I have no experience with repsnapper.
Skeinforge might seem complicated at first but after a while you'll know all settings by heart.
And I can guide you through it so no worries.

THEN: End stops !!
You MUST make sure these are aligned correctly or you could destroy/bend some parts, especially the Z.
The first time I homed all axis my Z kept lowering bending my plate.
Lower your Z in increments of 1mm and make sure your hot-end is positioned above the openspace of your bed.
And even if you have aligned it properly you MUST always keep checking it because the metalsheet bends very easily if touched unintentionally. For this reason I've designed special guide rails (which I'll soon upload to thingiverse)
With these guide-rails you'll never have to worry about it again.

THEN: Firmware
You might also need to reconfigure your firmware. For me the settings were not correct.
I'm talking about thermistor configuration and steps_per_mm for all axis including extruder (called E).

You'll have to do some basic measurements first.
I used a simple ruler which I placed on the bed. Then I moved the hot-end by 100mm for each direction in Pronterface.
If they are correct you dont have to correct them.

Then turn on your hot-end and test it on different temperatures, I used 100C then 150C and then 200C.
I used an external temp-measurement-device to see if it matched.
But DONT do 200C-test if the previous two were not correct because if it's incorrect it might get too hot.

THEN: HOT-END
I highly recommend upgrading your hot-end to a makergear hot-end or the J Head MKIV-B.
Both are great (I have them both one for PLA 1.75mm and one for ABS-3mm).
The one Botmill gives you will jam-up quickly and/or break. I've been through 3 of them before I upgraded.


I suggest doing the above before I continue.

cheers B)]]> ryan_prof Reprappers Sun, 04 Dec 2011 13:20:46 -0500 https://reprap.org/forum/read.php?4,104517,108766#msg-108766 https://reprap.org/forum/read.php?4,104517,108766#msg-108766
I was hoping the installation wouldt be too hard as I am new to arduino microcontrollers
I am having problems installing the Arduino mega 2560.inf, Win7 doesent accept it in any way.
So far the printer is registered as FT232R USB UART

I have no idea about what the problem coud be.]]> Olodn Reprappers Sat, 03 Dec 2011 18:31:09 -0500 https://reprap.org/forum/read.php?4,104517,107161#msg-107161 https://reprap.org/forum/read.php?4,104517,107161#msg-107161 richrap Reprappers Mon, 21 Nov 2011 12:05:02 -0500 https://reprap.org/forum/read.php?4,104517,107145#msg-107145 https://reprap.org/forum/read.php?4,104517,107145#msg-107145 nophead Reprappers Mon, 21 Nov 2011 10:57:17 -0500 https://reprap.org/forum/read.php?4,104517,105755#msg-105755 https://reprap.org/forum/read.php?4,104517,105755#msg-105755
No point as i live on the other side of the world chasing a refund.
pretty sure i've fried (or is was already) the A4988/83 chip for X axis

its a pretty simple machine, needs to be squared up and thread locked but i have one question.

if i was to build a frame with a bigger build space (let say 500mm x 500mm x 500mm) would the micro have enough memory for this or would i need a corecontroller?

also im waiting for this to come out
[3dhomemade.blogspot.com]]]> buket of water Reprappers Fri, 11 Nov 2011 17:33:40 -0500 https://reprap.org/forum/read.php?4,104517,105706#msg-105706 https://reprap.org/forum/read.php?4,104517,105706#msg-105706 brnrd Reprappers Fri, 11 Nov 2011 08:08:37 -0500 https://reprap.org/forum/read.php?4,104517,105669#msg-105669 https://reprap.org/forum/read.php?4,104517,105669#msg-105669 buket of water Reprappers Fri, 11 Nov 2011 02:28:36 -0500 https://reprap.org/forum/read.php?4,104517,105484#msg-105484 https://reprap.org/forum/read.php?4,104517,105484#msg-105484
right now i can get one LED to flash twice on the motherboard when i try to connect it with repsnapper

but repsnapper doesn't remain connected

*edit* but with rep rap's software i can agitate move i can't nudge x,y,z]]> buket of water Reprappers Thu, 10 Nov 2011 06:00:35 -0500 https://reprap.org/forum/read.php?4,104517,105467#msg-105467 https://reprap.org/forum/read.php?4,104517,105467#msg-105467
So far as I know, there's no practical way to download the firmware from the board. Google may turn up some hack to do it, but I believe it needs to be a function built into the firmware to be copied.

Sprinter includes a preset config for RAMPS 1.3 which should work with 1.4,as well as one for Gen6 so it should be a case of download, set, compile and burn.]]> Andrew Smith Reprappers Thu, 10 Nov 2011 04:29:15 -0500 https://reprap.org/forum/read.php?4,104517,105432#msg-105432 https://reprap.org/forum/read.php?4,104517,105432#msg-105432 also no longer getting a response from botmill - oh well

any i guess i have reset it electronically and upload sprinter firmware.

is there a way in arduino to download the program (if any) off the micro controller

i also don't know what electronic this has.
i know it has a arduino mega 2560

but if its ramps 1.4 or gen6 i don't know.

is there anyone in australia i could send the mother board to test this for me?

starting to walking around in circles now]]> buket of water Reprappers Wed, 09 Nov 2011 20:16:43 -0500 https://reprap.org/forum/read.php?4,104517,104917#msg-104917 https://reprap.org/forum/read.php?4,104517,104917#msg-104917 [www.ftdichip.com]

That should create a com port for the software to use to connect to the printer. Then, fire up the arduino environment, select that com port, start the serial talker an tweak the baud rate till you see the word 'start'. Send the command 'M105', if it returns the current temperatures, you should be good to go.]]> Andrew Smith Reprappers Sun, 06 Nov 2011 06:12:11 -0500 https://reprap.org/forum/read.php?4,104517,104648#msg-104648 https://reprap.org/forum/read.php?4,104517,104648#msg-104648
this is what i have done so far:
downloaded arduino (complier i guess)
installed Arduino MEGA 2560.inf

downloaded CDM20802_Setup
ran it
restarted the computer after it finished. yet it appears to do nothing

downloaded and installed repsnapper. minus connecting to the printer it appears to work.

Im not sure what to try next
Im assuming the machine itself is correctly wired. i don't have anything to compare it too.

was hoping to get it going before i had to go to work]]> buket of water Reprappers Thu, 03 Nov 2011 19:33:52 -0400 https://reprap.org/forum/read.php?4,104517,104579#msg-104579 https://reprap.org/forum/read.php?4,104517,104579#msg-104579 brnrd Reprappers Thu, 03 Nov 2011 11:57:16 -0400 https://reprap.org/forum/read.php?4,104517,104568#msg-104568 https://reprap.org/forum/read.php?4,104517,104568#msg-104568 -------------------------------------------------------
> What's a "glider"? Probably you don't mean a
> sailplane :)


I'm guessing one of these:

The Glider 3.0 PnP 3D Printer
This is a fully assembled, plug-and-print Desktop 3D printer!

Take it out of the box, plug in the power cord and the USB and upload a 3D Model to print (no building or calibration necessary). Software comes with your printer settings fully saved on a USB Keychain so no installation needed.

Technical support service available via email to help you understand how your printer works and how to maintain it.

[www.reprapcentral.com]

I would suggest the OP should contact the seller for support - I'm not sure how standard the hardware and software for this thing is (although it looks like a normal Mendel)]]> julianh72 Reprappers Thu, 03 Nov 2011 10:44:06 -0400 https://reprap.org/forum/read.php?4,104517,104550#msg-104550 https://reprap.org/forum/read.php?4,104517,104550#msg-104550 buket of water Reprappers Thu, 03 Nov 2011 08:43:49 -0400 https://reprap.org/forum/read.php?4,104517,104544#msg-104544 https://reprap.org/forum/read.php?4,104517,104544#msg-104544
mendel then]]> buket of water Reprappers Thu, 03 Nov 2011 07:34:58 -0400 https://reprap.org/forum/read.php?4,104517,104538#msg-104538 https://reprap.org/forum/read.php?4,104517,104538#msg-104538 Traumflug Reprappers Thu, 03 Nov 2011 06:14:04 -0400 https://reprap.org/forum/read.php?4,104517,104517#msg-104517 https://reprap.org/forum/read.php?4,104517,104517#msg-104517
Im a beginner with this whole thing

I brought a glider as i knowing little about electronics. sadly it came with a blank usb stick so i downloaded repsnapper and a driver off their website. repsnapper works (minus connect to the printer) and the driver appears to do nothing

the issue im having is getting the computer to recognise the printer at all (running xp, java 6)

anyway i guess im after list of software i need and where to get it

Thanks for your help]]> buket of water Reprappers Thu, 03 Nov 2011 04:13:52 -0400