I am sorry if these questions have already been answered but I ether can not find a concussive answer or nothing at all. 1. I have remade RAMPS v1.3 and a MK1 heat bed (http://www.ebay.com/itm/RepRap-MK1-Heatbed-Heated-Bed-Heat-Prusa-Mendel-/130587006465?pt=LH_DefaultDomain_0&hash=item1e67979601) I still need a power supply 1.1 What power supply do I need? An ATX power supply? Can I get a link or an explanation on; wattage, SATA or IDE, amps.... 1.1.1 What connections (and how to) do I need to buy to connect to RAMPS and MK1 heat bed to power supply 1.2 For the print bed 1.2.1 The Ply board I use to hold up the heat bed how thick should it be? 1.2.2 I need to insulate under the head bed? How/what Vid Blog (http://www.youtube.com/watch?v=SZv-Dw0Ulig&feature=channel_video_title) https://reprap.org/forum/read.php?4,105131,105131#msg-105131 Mon, 05 Oct 2026 11:08:13 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,105131,105257#msg-105257 https://reprap.org/forum/read.php?4,105131,105257#msg-105257
[www.ebay.com]]]> GeeksGoneBad Reprappers Tue, 08 Nov 2011 14:21:15 -0500 https://reprap.org/forum/read.php?4,105131,105143#msg-105143 https://reprap.org/forum/read.php?4,105131,105143#msg-105143
PSU build

10mm ply (3/8") should be thick enough after all you need to screw the belt clamps to it. I don't insulate mine and I use MDF at 55C for PLA it's not hot enough to burn it]]> NelsonRap Reprappers Tue, 08 Nov 2011 01:29:40 -0500 https://reprap.org/forum/read.php?4,105131,105131#msg-105131 https://reprap.org/forum/read.php?4,105131,105131#msg-105131
1. I have remade RAMPS v1.3 and a MK1 heat bed (http://www.ebay.com/itm/RepRap-MK1-Heatbed-Heated-Bed-Heat-Prusa-Mendel-/130587006465?pt=LH_DefaultDomain_0&hash=item1e67979601) I still need a power supply
1.1 What power supply do I need? An ATX power supply? Can I get a link or an explanation on; wattage, SATA or IDE, amps....
1.1.1 What connections (and how to) do I need to buy to connect to RAMPS and MK1 heat bed to power supply
1.2 For the print bed
1.2.1 The Ply board I use to hold up the heat bed how thick should it be?
1.2.2 I need to insulate under the head bed? How/what


Vid Blog (http://www.youtube.com/watch?v=SZv-Dw0Ulig&feature=channel_video_title)]]> BobFA Reprappers Mon, 07 Nov 2011 22:24:56 -0500