Hello all, I'm in the process of pricing out a 3d printer. I've found some steppers on ebay for what I think is a good price. I've seen several postings like this or this. Will either of those motors work? Thanks Bill https://reprap.org/forum/read.php?4,134879,134879#msg-134879 Tue, 06 Oct 2026 21:00:13 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,134879,141724#msg-141724 https://reprap.org/forum/read.php?4,134879,141724#msg-141724 nophead Reprappers Sun, 08 Jul 2012 06:10:42 -0400 https://reprap.org/forum/read.php?4,134879,141713#msg-141713 https://reprap.org/forum/read.php?4,134879,141713#msg-141713 DavidS Reprappers Sun, 08 Jul 2012 03:03:54 -0400 https://reprap.org/forum/read.php?4,134879,141415#msg-141415 https://reprap.org/forum/read.php?4,134879,141415#msg-141415 jcabrer Reprappers Thu, 05 Jul 2012 10:56:47 -0400 https://reprap.org/forum/read.php?4,134879,141014#msg-141014 https://reprap.org/forum/read.php?4,134879,141014#msg-141014 -------------------------------------------------------
> I've just ordered some of these
>
> [www.ebay.co.uk]
> ue-stepper-motor-44Ncm-1-8degree-Reprap-CNC-roboti
> cs-/221042941117?pt=UK_BOI_Electrical_Components_S
> upplies_ET&var=&hash=item33772f9cbd
>
> Hopefully they will be ok, although the 4.4
> holding torque is not as high as the alltronics
> ones
>
> dgs

Think3dPrint3d is a very good supplier, if they are selling them then they will work fine.(tu)]]> RegionX Reprappers Tue, 03 Jul 2012 04:13:59 -0400 https://reprap.org/forum/read.php?4,134879,140757#msg-140757 https://reprap.org/forum/read.php?4,134879,140757#msg-140757
[www.ebay.co.uk]

Hopefully they will be ok, although the 4.4 holding torque is not as high as the alltronics ones

dgs]]> dgs2001 Reprappers Sun, 01 Jul 2012 05:20:19 -0400 https://reprap.org/forum/read.php?4,134879,140739#msg-140739 https://reprap.org/forum/read.php?4,134879,140739#msg-140739 and inertia. I am building with 8mm linear bearings so they may
be o'k.

Seeing most of the set-ups I think 1.4 - 2 amp motors are requitred
with NEMA17 frames about 40mm long.

I understand the driver boards are build for 2.5 amp max.]]> Scrachbuilder Reprappers Sun, 01 Jul 2012 01:44:18 -0400 https://reprap.org/forum/read.php?4,134879,137725#msg-137725 https://reprap.org/forum/read.php?4,134879,137725#msg-137725
[www.ebay.com]

I bought these and they solved all of my stepping issues.]]> Zimtower Reprappers Thu, 14 Jun 2012 02:20:15 -0400 https://reprap.org/forum/read.php?4,134879,135379#msg-135379 https://reprap.org/forum/read.php?4,134879,135379#msg-135379 MaFraL Reprappers Wed, 30 May 2012 20:15:04 -0400 https://reprap.org/forum/read.php?4,134879,134883#msg-134883 https://reprap.org/forum/read.php?4,134879,134883#msg-134883
That price is good.

You will only need the 4 inner wires so cut off the 2 outer wires altogether when you connect your extension wires to your electronics.]]> gregted Reprappers Sun, 27 May 2012 10:00:57 -0400 https://reprap.org/forum/read.php?4,134879,134879#msg-134879 https://reprap.org/forum/read.php?4,134879,134879#msg-134879 I'm in the process of pricing out a 3d printer. I've found some steppers on ebay for what I think is a good price. I've seen several postings like this or this. Will either of those motors work?

Thanks
Bill]]> conscripted Reprappers Sun, 27 May 2012 09:45:01 -0400