Building a levelling jig I've designed a leveling jig that will hold a dial indicator and level the table within a few thousands of an inch for some really awesome prints, but I need a copy of the X shaped mount in a .dxf format so I can edit it to fit leveling nuts to replace the stock ones. Is it possible to get a copy of that in a format that I can modify it? I don't have any software that can work with .stl files (I use RhinoCAM). Or is there any decent software to convert mesh to .dxf? https://reprap.org/forum/read.php?4,226744,226744#msg-226744 Sat, 10 Oct 2026 04:40:12 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,226744,230400#msg-230400 Re: Building a levelling jig https://reprap.org/forum/read.php?4,226744,230400#msg-230400
Comes with a dial indicator.

[attachment 17146 RepRapLeveller01.jpg]

[www.srcgunworks.com]]]> SRCGw Reprappers Sat, 27 Jul 2013 17:14:23 -0400 https://reprap.org/forum/read.php?4,226744,227034#msg-227034 Re: Building a levelling jig https://reprap.org/forum/read.php?4,226744,227034#msg-227034 SRCGw Reprappers Sun, 14 Jul 2013 18:10:38 -0400 https://reprap.org/forum/read.php?4,226744,227011#msg-227011 Re: Building a levelling jig https://reprap.org/forum/read.php?4,226744,227011#msg-227011 http://www.thingiverse.com/thing:26354]]> Bruce Reprappers Sun, 14 Jul 2013 16:57:02 -0400 https://reprap.org/forum/read.php?4,226744,226995#msg-226995 Re: Building a levelling jig https://reprap.org/forum/read.php?4,226744,226995#msg-226995 SRCGw Reprappers Sun, 14 Jul 2013 16:13:06 -0400 https://reprap.org/forum/read.php?4,226744,226903#msg-226903 Re: Building a levelling jig https://reprap.org/forum/read.php?4,226744,226903#msg-226903 appdev007 Reprappers Sun, 14 Jul 2013 10:10:56 -0400 https://reprap.org/forum/read.php?4,226744,226790#msg-226790 Re: Building a levelling jig https://reprap.org/forum/read.php?4,226744,226790#msg-226790 SRCGw Reprappers Sat, 13 Jul 2013 20:46:29 -0400 https://reprap.org/forum/read.php?4,226744,226774#msg-226774 Re: Building a levelling jig https://reprap.org/forum/read.php?4,226744,226774#msg-226774
Ben]]> plexer Reprappers Sat, 13 Jul 2013 18:05:51 -0400 https://reprap.org/forum/read.php?4,226744,226744#msg-226744 Building a levelling jig https://reprap.org/forum/read.php?4,226744,226744#msg-226744
Is it possible to get a copy of that in a format that I can modify it? I don't have any software that can work with .stl files (I use RhinoCAM).

Or is there any decent software to convert mesh to .dxf?]]> SRCGw Reprappers Sat, 13 Jul 2013 14:25:36 -0400