Is the huxley flexible enough to add a second extruder head? If so, what would I need in order to go about doing so. I'd like to be able to print in two colors if possible. https://reprap.org/forum/read.php?4,268163,268163#msg-268163 Wed, 22 Apr 2026 01:47:34 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,268163,271778#msg-271778 https://reprap.org/forum/read.php?4,268163,271778#msg-271778 uncle_bob Reprappers Mon, 25 Nov 2013 12:05:49 -0500 https://reprap.org/forum/read.php?4,268163,268304#msg-268304 https://reprap.org/forum/read.php?4,268163,268304#msg-268304
How much print area are you willing to give up to do this? That's always the first question when dual extruders come up.

Do you mind that one drips (oozes) a bit into the print? If so then you need a dual carriage dual extruder. (cool but complicated).

From what little I've seen, this isn't going to be a straight buy it and drop it in upgrade on your printer regardless of the direction you go.]]> uncle_bob Reprappers Sun, 17 Nov 2013 09:25:34 -0500 https://reprap.org/forum/read.php?4,268163,268163#msg-268163 https://reprap.org/forum/read.php?4,268163,268163#msg-268163 benheckard Reprappers Sun, 17 Nov 2013 02:12:55 -0500