I make a flat piece with 4 vertical cylinders above. The problem is the filaments between the cylinders. The cylinders are bristling with pikes. The printer should print one cylinder and do the following after. Is it possible to program it with Repetier 0.84, thank you! https://reprap.org/forum/read.php?4,280537,280537#msg-280537 Mon, 14 Sep 2026 13:37:52 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,280537,280617#msg-280617 https://reprap.org/forum/read.php?4,280537,280617#msg-280617 Xabbax Reprappers Mon, 16 Dec 2013 13:19:53 -0500 https://reprap.org/forum/read.php?4,280537,280603#msg-280603 https://reprap.org/forum/read.php?4,280537,280603#msg-280603
Il y a un forum pour les utilisateurs francophone ici:

forum français

Without seeing photos, I would guess that the stringing between objects is insufficient anti-ooze retraction.

I know some software can print one object at a time, but I have not used that feature. Others with more experiance will have to answer that one!]]> Yvan Reprappers Mon, 16 Dec 2013 12:51:37 -0500 https://reprap.org/forum/read.php?4,280537,280595#msg-280595 https://reprap.org/forum/read.php?4,280537,280595#msg-280595 pierre&johan Reprappers Mon, 16 Dec 2013 12:22:34 -0500 https://reprap.org/forum/read.php?4,280537,280592#msg-280592 https://reprap.org/forum/read.php?4,280537,280592#msg-280592 pierre&johan Reprappers Mon, 16 Dec 2013 12:18:46 -0500 https://reprap.org/forum/read.php?4,280537,280558#msg-280558 https://reprap.org/forum/read.php?4,280537,280558#msg-280558 Xabbax Reprappers Mon, 16 Dec 2013 10:36:56 -0500 https://reprap.org/forum/read.php?4,280537,280545#msg-280545 https://reprap.org/forum/read.php?4,280537,280545#msg-280545 Le logiciel est:repetier 0,84. L'imprimante devrait faire un cylindre à la fois. Est-ce possible de programmer ?
Merci de me conseiller !

P & J]]> pierre&johan Reprappers Mon, 16 Dec 2013 10:03:32 -0500 https://reprap.org/forum/read.php?4,280537,280537#msg-280537 https://reprap.org/forum/read.php?4,280537,280537#msg-280537 pierre&johan Reprappers Mon, 16 Dec 2013 09:50:31 -0500