offset print ive gotten alot of my printing issues hammered down, but now during prints it seems to just shift along the y axis about 4.8mm, sorry took pic with caliper set to inches my belts are all tight, not making any odd noises while printing, i tried printing an i3 y corner, it made it like 10 layers up then shifted, this i3 carriage was sometime during the 2nd layer im using my i2 running sprinter printing abs any help is greatly appreciated https://reprap.org/forum/read.php?4,322758,322758#msg-322758 Wed, 11 Mar 2026 03:03:29 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,322758,323312#msg-323312 Re: offset print https://reprap.org/forum/read.php?4,322758,323312#msg-323312 jasperash Reprappers Tue, 11 Mar 2014 15:49:30 -0400 https://reprap.org/forum/read.php?4,322758,323246#msg-323246 Re: offset print https://reprap.org/forum/read.php?4,322758,323246#msg-323246 It was working but every so many layers my y axis would just shift and i would get a nice set of stairs up the walls.

It was just one of those weird things where it was working but then would stall for a bit.
Put a different stick in and never saw the problem again.

Just my 2 cents]]> makovai Reprappers Tue, 11 Mar 2014 13:50:02 -0400 https://reprap.org/forum/read.php?4,322758,322993#msg-322993 Re: offset print https://reprap.org/forum/read.php?4,322758,322993#msg-322993 waitaki Reprappers Tue, 11 Mar 2014 04:22:18 -0400 https://reprap.org/forum/read.php?4,322758,322920#msg-322920 Re: offset print https://reprap.org/forum/read.php?4,322758,322920#msg-322920 cat.farmer Reprappers Mon, 10 Mar 2014 21:11:11 -0400 https://reprap.org/forum/read.php?4,322758,322870#msg-322870 Re: offset print https://reprap.org/forum/read.php?4,322758,322870#msg-322870 watching the tool path on pronterface the machine thinks its going along correctly

the usb cable is only like 3ft long]]> jasperash Reprappers Mon, 10 Mar 2014 18:36:07 -0400 https://reprap.org/forum/read.php?4,322758,322854#msg-322854 Re: offset print https://reprap.org/forum/read.php?4,322758,322854#msg-322854 Anonymous User Reprappers Mon, 10 Mar 2014 18:14:00 -0400 https://reprap.org/forum/read.php?4,322758,322758#msg-322758 offset print https://reprap.org/forum/read.php?4,322758,322758#msg-322758
my belts are all tight, not making any odd noises while printing, i tried printing an i3 y corner, it made it like 10 layers up then shifted, this i3 carriage was sometime during the 2nd layer

im using my i2 running sprinter printing abs

any help is greatly appreciated]]> jasperash Reprappers Mon, 10 Mar 2014 14:40:10 -0400