Hi folks, I'm having an issue where the thermistor and endstop connectors will fall off the RAMPS board. I have my RAMPS board mounted 90 degrees on the side of my frame. The connectors have almost no friction with the pins. I think they slide off just from the vibrations of my printer. Are there any sort of locking connectors I can purchase? Or other ideas? Thanks!! https://reprap.org/forum/read.php?4,382913,382913#msg-382913 Thu, 13 Aug 2026 21:16:01 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,382913,383005#msg-383005 https://reprap.org/forum/read.php?4,382913,383005#msg-383005 Paul4865 Reprappers Mon, 14 Jul 2014 17:53:04 -0400 https://reprap.org/forum/read.php?4,382913,382940#msg-382940 https://reprap.org/forum/read.php?4,382913,382940#msg-382940
Thanks!!]]> foul_owl Reprappers Mon, 14 Jul 2014 16:02:56 -0400 https://reprap.org/forum/read.php?4,382913,382932#msg-382932 https://reprap.org/forum/read.php?4,382913,382932#msg-382932 connector housings that you need as well as pre-crimped wires that can be easily inserted into the housings.]]> jbernardis Reprappers Mon, 14 Jul 2014 15:46:17 -0400 https://reprap.org/forum/read.php?4,382913,382913#msg-382913 https://reprap.org/forum/read.php?4,382913,382913#msg-382913
I'm having an issue where the thermistor and endstop connectors will fall off the RAMPS board. I have my RAMPS board mounted 90 degrees on the side of my frame.

The connectors have almost no friction with the pins. I think they slide off just from the vibrations of my printer.

Are there any sort of locking connectors I can purchase? Or other ideas?

Thanks!!]]> foul_owl Reprappers Mon, 14 Jul 2014 15:15:41 -0400