OpenSource design where bed doesn't move?

OpenSource design where bed doesn't move? Which good opensource designs there is where bed doesn't move, or at maximum moves in Z? Preferrably something easy to scale to desired size and widely used. CoreXY is a plus. Is there a good design available? I'm considering building another printer for which i'd like to have Z of at least 150mm and either X or Y 450-600mm to print something in one go instead of splitting to multiple pieces. Otherwise it can be rather basic - will be running only single extruder, but has to be using proper bearings. https://reprap.org/forum/read.php?4,459960,459960#msg-459960 Sun, 15 Mar 2026 12:53:32 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,459960,461164#msg-461164 Re: OpenSource design where bed doesn't move? https://reprap.org/forum/read.php?4,459960,461164#msg-461164
Delta has some other design considerations than cardasian - i'd rather to stick closer to what i already know.

what i would like to use it for would be REALLY hard to print upwards - couldn't do it without support material, but with large X or Y can print without support.]]> PulsedMedia Reprappers Mon, 26 Jan 2015 19:50:43 -0500 https://reprap.org/forum/read.php?4,459960,461080#msg-461080 Re: OpenSource design where bed doesn't move? https://reprap.org/forum/read.php?4,459960,461080#msg-461080 dclarkm Reprappers Mon, 26 Jan 2015 16:02:26 -0500 https://reprap.org/forum/read.php?4,459960,460103#msg-460103 Re: OpenSource design where bed doesn't move? https://reprap.org/forum/read.php?4,459960,460103#msg-460103

Quote
PulsedMedia
Which good opensource designs there is where bed doesn't move, or at maximum moves in Z?
Preferrably something easy to scale to desired size and widely used. CoreXY is a plus.

Is there a good design available?

I'm considering building another printer for which i'd like to have Z of at least 150mm and either X or Y 450-600mm to print something in one go instead of splitting to multiple pieces.
Otherwise it can be rather basic - will be running only single extruder, but has to be using proper bearings.

Have a look at Zeologic's thread After H-Bot go CoreXY in the Core XY Part of the forum mind you will have to scale if you want that sort of size.

I have never heard of joining parts in either the X or Y axis it has always been in the Z?

Doug.]]> dougal1957 Reprappers Sat, 24 Jan 2015 13:43:36 -0500 https://reprap.org/forum/read.php?4,459960,459960#msg-459960 OpenSource design where bed doesn't move? https://reprap.org/forum/read.php?4,459960,459960#msg-459960 Preferrably something easy to scale to desired size and widely used. CoreXY is a plus.

Is there a good design available?

I'm considering building another printer for which i'd like to have Z of at least 150mm and either X or Y 450-600mm to print something in one go instead of splitting to multiple pieces.
Otherwise it can be rather basic - will be running only single extruder, but has to be using proper bearings.]]> PulsedMedia Reprappers Sat, 24 Jan 2015 09:40:01 -0500