Quote
OO DURKE OO
well it just said repetier host I did not see an option for the cura version. It does have a 3d imaging built into it. How do I get to the cura feature to see?

Quote
OO DURKE OO
it set the z height to 0.29 and then started printing when really its should be like 0.2 or close to that.

Quote
OO DURKE OO
This is the start code from CURA

;Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
;M109 S{print_temperature} ;Uncomment to add your own temperature line
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F{travel_speed} ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E3 ;extrude 3mm of feed stock
G92 E0 ;zero the extruded length again
G1 F{travel_speed}
;Put printing message on LCD screen
M117 Printing...

Quote
OO DURKE OO
ah how do I do that? I am totally new to this as per my post. I am using Cura 14.07 and just using the files they provided me on the disc to do a test run of the printer.