I recently had an issue with my M505 prusa I3 where I had to connect it to another pc. Once I moved the printer and starting printing again I noticed that during the print the extruder motor is not moving to pull the filament. I test the extruder in repetier manual control and the motor works to pull the filament fine. I am not sure if any settings have changed or if the board is the issue. Thanks, Keith https://reprap.org/forum/read.php?4,579848,579848#msg-579848 Mon, 12 Oct 2026 14:58:21 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,579848,580896#msg-580896 https://reprap.org/forum/read.php?4,579848,580896#msg-580896 bryanandaimee Reprappers Fri, 06 Nov 2015 14:30:19 -0500 https://reprap.org/forum/read.php?4,579848,579848#msg-579848 https://reprap.org/forum/read.php?4,579848,579848#msg-579848
Thanks,

Keith]]> urable2 Reprappers Wed, 04 Nov 2015 10:18:02 -0500