Bed Leveling but extruder head out of bounds I'm trying to level the bed and print but it goes auto home and out of bounds :S Me trying to level my bed https://reprap.org/forum/read.php?4,627996,627996#msg-627996 Fri, 17 Jul 2026 07:17:00 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,627996,631153#msg-631153 Re: Bed Leveling but extruder head out of bounds https://reprap.org/forum/read.php?4,627996,631153#msg-631153 Make sure the belts are tight, not too tight.
With the printer powered off, try to move the X and Y carriages by hand. They should slide smoothly and easily.]]> blt3dp Reprappers Wed, 24 Feb 2016 11:28:22 -0500 https://reprap.org/forum/read.php?4,627996,630325#msg-630325 Print stepping on y axis every time it goes up a layer https://reprap.org/forum/read.php?4,627996,630325#msg-630325
How do I fix this?]]> nguill00 Reprappers Mon, 22 Feb 2016 15:20:23 -0500 https://reprap.org/forum/read.php?4,627996,628697#msg-628697 Re: Bed Leveling but extruder head out of bounds https://reprap.org/forum/read.php?4,627996,628697#msg-628697 Its under "advanced" and listed as bottom layer speed. 10-20 works good. nice and slow on the first layer.]]> Floyd Reprappers Fri, 19 Feb 2016 00:19:44 -0500 https://reprap.org/forum/read.php?4,627996,628576#msg-628576 Re: Bed Leveling but extruder head out of bounds https://reprap.org/forum/read.php?4,627996,628576#msg-628576 nguill00 Reprappers Thu, 18 Feb 2016 16:29:43 -0500 https://reprap.org/forum/read.php?4,627996,628569#msg-628569 Re: Bed Leveling but extruder head out of bounds https://reprap.org/forum/read.php?4,627996,628569#msg-628569 blt3dp Reprappers Thu, 18 Feb 2016 16:21:33 -0500 https://reprap.org/forum/read.php?4,627996,628501#msg-628501 Re: Bed Leveling but extruder head out of bounds https://reprap.org/forum/read.php?4,627996,628501#msg-628501
I print my first layer in ABS at 10mm/sec to get good contact.]]> Floyd Reprappers Thu, 18 Feb 2016 13:52:52 -0500 https://reprap.org/forum/read.php?4,627996,628442#msg-628442 Re: Bed Leveling but extruder head out of bounds https://reprap.org/forum/read.php?4,627996,628442#msg-628442 nguill00 Reprappers Thu, 18 Feb 2016 11:49:54 -0500 https://reprap.org/forum/read.php?4,627996,628005#msg-628005 Re: Bed Leveling but extruder head out of bounds https://reprap.org/forum/read.php?4,627996,628005#msg-628005
When I auto home the coordinates are -5, -55, .8
The Z axis is the only one that goes to the right place. The X axis is too far to the left and the Y axis is really far back]]> nguill00 Reprappers Wed, 17 Feb 2016 16:57:24 -0500 https://reprap.org/forum/read.php?4,627996,627998#msg-627998 Re: Bed Leveling but extruder head out of bounds https://reprap.org/forum/read.php?4,627996,627998#msg-627998 I had nothing but issues with that tool on my i3 also.]]> Floyd Reprappers Wed, 17 Feb 2016 16:42:47 -0500 https://reprap.org/forum/read.php?4,627996,627996#msg-627996 Bed Leveling but extruder head out of bounds https://reprap.org/forum/read.php?4,627996,627996#msg-627996
Me trying to level my bed]]> nguill00 Reprappers Wed, 17 Feb 2016 16:35:41 -0500