I have baught this printer 15 days ago, I have calibrated its X, Y , Z and Extruder. Using Some Online Guides. Made Changes and checked too. But i have seen, .1 or .2 later height is making good items. but .3 height does not sticks properly, and does not makes good prints. I have tweaked slicer settings, so when i print .5 mm walls using .2 layer height, it prints good (see Picture) But .3 is a impossible item to me. I have default nozzle .5 mm Please Help. https://reprap.org/forum/read.php?4,655506,655506#msg-655506 Sun, 13 Sep 2026 07:37:27 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,655506,655506#msg-655506 https://reprap.org/forum/read.php?4,655506,655506#msg-655506
I have calibrated its X, Y , Z and Extruder. Using Some Online Guides.

Made Changes and checked too.

But i have seen, .1 or .2 later height is making good items.

but .3 height does not sticks properly, and does not makes good prints.

I have tweaked slicer settings, so when i print .5 mm walls using .2 layer height, it prints good (see Picture)

But .3 is a impossible item to me.

I have default nozzle .5 mm

Please Help.]]> ajaybnl Reprappers Fri, 22 Apr 2016 08:49:42 -0400